aktivator SPRAY ON CHROME/HYDROCHROME

Di sini saya bukan bermaksud menggurui pihak manapun, cuma berbagi pengalaman yang saya tau, Semoga bermanfaat
Bahan bahan
Stannous chloride grade AR
HCL 37% grade AR
Jarum suntik 10ml (tanpa jarum)
TImbangan digital 0.01gr
Cup air 1000ml
Air demineral
Untuk larutan aktivator ini saya simpan selama 1x24jam sudah siap pakai,kalau ingin cepat , aktivator di rebus sampai suhu 60 derajat dan dinginkan sebelum pakai
Dan umur larutan aktivator ini bertahan 3 hari, jangan pakai melebihi batas 3 hari, terimakasih
Semua bahan di atas bersifat korosif dan berbahaya, di sarankan memakai masker,kaca mata& sarung tangan,agar tidak terjadi sesuatu yang merugikan diri sendiri,

[@cheriesvespa9316]

Jos Mas termakasih sudah menularkan ilmu2 nya semangat BosKu

[@ABsprayonchrome]

Sama sama bos🙏🙏

[@mohsinhanif4793]

5gr stannous chloride + 10ml hydrochloric acid to 1 liter Deionized water

[@ABsprayonchrome]

Yes

[@mohsinhanif4793]

@@rasulkarani4513 what you want?

[@mohsinhanif4793]

@@rasulkarani4513 this is not an easy job hydro chrome.

[@balbirthukral8985]

Where r u located ,we give training ,chemicals and can help u with formulations also. We are doing hydrochrome work in new delhi

[@alemayehuamanuel3479]

please also post the mix formula for the other solutions, A,B and S

[@gloriusart6027]

Mantap mas....sangat bermanfaat

[@ABsprayonchrome]

terimakasih mas ,semoga berkenan🙏

[@strikeupscreenprinting]

Mas bikin cairan S,A1 A2,B dan wairing again ya dong 😁

[@opviper895]

Sir can you tell me what are the chemicals used in the S bottle (anti oxidant or silver sealer)

[@M-gholami]

For activator you can create one Liter using Stannous chloride 10 Grams, 20 ml of Hydrochloric Acid and then use enough Di water to make 1L solution.
For the Silvering formula, 3 grams of Silver Nitrate in a 500ml of Di water, then 3 grams of sodium hydroxide, this will generate a reaction that will generate Silver Hydroxide, then you dissolve this with ammonium hydroxide, I think it’s about 10 ml, but slowly add about 5 ml until the dissolve the Silver Hydroxide until the liquid is clear, then add enough Di water to make 1L of solution.
For reducer, 5 grams of Glucose and 1 ml of formalin(about 30% strength Formaldehyde) per 1L of water.
That is a very basic set up, you would need to try it first then do adjustments as you see fit.

[@franciscuseko5918]

Makasih ilmunya....om....

[@ABsprayonchrome]

Siappp om jika ada pertanyaan jgn sungkan om 😄

[@franciscuseko5918]

@@ABsprayonchrome siapp..om...

[@mohammedfadzil3322]

Stannous chloride dicampur dengan apa sebelom dicampur dengan HCL?

[@ABsprayonchrome]

Air

[@mohammedfadzil3322]

@@ABsprayonchrome tiada video cara racik bahan A dan B?

[@ABsprayonchrome]

@@mohammedfadzil3322 ada,tp blum di upload

[@mohammedfadzil3322]

@@ABsprayonchrome tak sabar tunggu video selanjutnya

[@ABsprayonchrome]

@@mohammedfadzil3322 insyallah

[@matyusmatyus8521]

Om permasalan kabutnya seperti awan kenapa ya?

[@ABsprayonchrome]

Apa larutan nya imbang A&B?

[@matyusmatyus8521]

Kabutnya nyababnya Ab om?

[@ABsprayonchrome]

@@matyusmatyus8521 kabut awan putih biasa nya di AB,

[@matyusmatyus8521]

Ok om trima kasih semoga murah rezekinya

[@kalras.r.7323]

Kindly Enlighten us for the following information
Life of hydro process Chrome finish compared to Conventional process
Glaze of finish compared to Conventional process
Micron Layer of Chrome by Hydro process
Cost difference between both Process of even thick Layer of Chrome Coating
List of Equipments and Devices of Hydro Process
List of Coating Materials and Chemicals
List of Mfrs of Machine, Equipments and Devices
Air Compressor Capacity and Air Pressure required for Coating
Water Supply Pressure
Size of Pipes and Tubes for Air Water, Chemicals, and Water alongwith their Material
Curing Time and number of Coatings
Power Requirement
Clearances to be obtained from Central or State Govt,
Area in Square Fts/ Mtrs needed for single unit

[@AmitKumar-jz6gb]

Hi sir

[@ABsprayonchrome]

Hi sir

[@phppaint6213]

Ini buat cairan K ya

[@ABsprayonchrome]

Iya betull

[@AmitKumar-jz6gb]

Video A1 A2 and B with details sir

[@herudanu2219]

A1= silver nitrate+ water+amonia
A2= caustic soda+water + amonia
b = sugar( glucosa)+ formalin...

[@M-gholami]

For activator you can create one Liter using Stannous chloride 10 Grams, 20 ml of Hydrochloric Acid and then use enough Di water to make 1L solution.
For the Silvering formula, 3 grams of Silver Nitrate in a 500ml of Di water, then 3 grams of sodium hydroxide, this will generate a reaction that will generate Silver Hydroxide, then you dissolve this with ammonium hydroxide, I think it’s about 10 ml, but slowly add about 5 ml until the dissolve the Silver Hydroxide until the liquid is clear, then add enough Di water to make 1L of solution.
For reducer, 5 grams of Glucose and 1 ml of formalin(about 30% strength Formaldehyde) per 1L of water.
That is a very basic set up, you would need to try it first then do adjustments as you see fit.

[@hamba_allah1945]

bang minta wa nya bang

[@ABsprayonchrome]

081261346062

[@georgesss000]

Hello sir can you send me contact plz ?

[@M-gholami]

For activator you can create one Liter using Stannous chloride 10 Grams, 20 ml of Hydrochloric Acid and then use enough Di water to make 1L solution.
For the Silvering formula, 3 grams of Silver Nitrate in a 500ml of Di water, then 3 grams of sodium hydroxide, this will generate a reaction that will generate Silver Hydroxide, then you dissolve this with ammonium hydroxide, I think it’s about 10 ml, but slowly add about 5 ml until the dissolve the Silver Hydroxide until the liquid is clear, then add enough Di water to make 1L of solution.
For reducer, 5 grams of Glucose and 1 ml of formalin(about 30% strength Formaldehyde) per 1L of water.
That is a very basic set up, you would need to try it first then do adjustments as you see fit.