Xiaomi M365 Scooter Motor Vibration fixed (hall sensor replacement)
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- M365 scooter Hall effect sensor replacement by an armature.
These sensors can fix harsh vibration on acceleration if one of your sensors has failed- causing a motor that is out of phase
Sensor used is A3144
Please like and subscribe
My motor is loud and it moves really slow, hall sensors?
Would have helped if you gave an example of the sound it makes when vibrating otherwise we have no clue if the issue your fixing is the issue im dealing with
Sorry it was hard to replicate and only seemed to occur under load
Same with mine I have no clue what your vibration sounds like
it is an indescribably loud vibration that occurs whenever you drive faster than a certain speed,
it is not the sound the stalling effect is the culprit .the ESC confuses transtioning in between the phases , stalling the 360 degrees infinite rotation. if this is the case then you will need to check all the current pahse assembly including the sensors, cables and mosfets etc.
Hallo! Wie macht sich ein Defekt bemerkbar?
Danke
Vibration and rumbling from the motor
@@nagisaian ok danke Freund das habe ich meins läuft manchmal manchmal nicht vielleicht ein Kabelbruch beim Reifen wechseln ich weis es nicht
@@hansgustaf7880 possibly a broken wire the battery welds are a common problem also in the battery pack :)
Dude, your engine is burnt out... melted insulation!
Yea I’m surprised it’s still working but it somehow only lost the sensors
Do you have to change them all, even if only one is damaged, and do you have to choose a specific type of sensor, or do all sensors work?
Sorry for the delay I would do them all they are very cheap and usually come in a pack of 5 or more
hi, mine is making nose when it is on the ground but when lift the wheel and run it, then it is pretty normal.
If it’s under load situations then it might be the hall sensors it should feel like a vibration also when riding
Hello I installed metour xiaomi m365 on my electric scooter pro error code18 and its beep I wanted to know if this xiaomi m365 engine is compatible with the electric scooter pro scooter cordially
Hi I’m unsure but error 18 indicates a motor that is not compatible what is wrong with the original motor
My m365 lose completely power when I hit a bump with the front wheel. I have hit the motor
Could be a loose wire or the biggest culprit tends to be battery welds braking on the battery
Would it be a hall sensor issue if it brakes randomly while acceleration?
I’m not too sure about that one maybe try the Facebook forums someone may have experienced the same issue
Same problem bro, u find solution? Please tell me im so upset, i have an external battery, and it went to 40kmh as max. It was a xiaomi pro. No problem till going downhill with to much throttle
@@capalot6999 it's either the controller (bad wiring) or the motor. Try replacing controller first
Esse rotor esta todo queimado na beira do penhasco , e você ainda troca os 3 sensores hahahaha
Well it was worth a shot ended up working out :)
Man, I tried to replace the motor cable without disconnecting the battery. I went from being afraid the scooter would break to the scooter not turning on anymore. Caput. How can I locate the problem?
You could try unplugging the motor cable and try turning the scooter on just to eliminate that being the source of the problem.
@@nagisaian I disconnected the 3 phase cables and the 5-pin connector but the scooter doesn't start anymore
I also had a short circuit on my scooter, the scooter would not turn on, then I replaced the immobilizer and the problem was solved.
@@R1s1ko81 what is the immobilizer?
hello whats the hall sensor number? or value?
Hi it’s a A3144 hall sensor which I used
@@nagisaian thank you
All sensor is 3144?
Yes mine were
hello description you are excellent and I'm sure it's the same problem with mine, because from the crash came to the break and short circuit in the cable and now the motor is with vibration, my question is where you got those sensor, thanks.
Hi I got them from AliExpress if you had a broken wire always try bacic stuff like checking for continuity in the wires :)
was the noise like mine? th-cam.com/video/xXyU7YGKzzs/w-d-xo.html
Hi sorry the noise I experienced was more of a growling/ vibrating noise under load