How Experience Welder Build a Custom Fuel Tank for Semi-Truck with Limited Equipment
ฝัง
- เผยแพร่เมื่อ 7 พ.ค. 2023
- How Experience Welder Build a Custom Fuel Tank for Semi-Truck with Limited Equipment
#howtobuildacustomfueltank #weldingfabricationprojects #fueltankbuild - ยานยนต์และพาหนะ
Сварщик просто лютейший! 😎👍👍👍👍👌
Да согласен 👍 шов как у автомата на листе в мм
👍👍👍👍
He is a really good welder with 6013 rods!
Nice job on that fuel tank!
He is using his squinters instead of his welding mask, sometimes, im not a welder, but that aint good, right?
The welding work is fantastic.
Зачем вешать замок на пробку если снизу сливной болт? Сварщик просто бог.
Yes 👍
Skilled craftsmanship
Great work
Good video thanks, I don't see anything limited
Just curious, why do you bend the end of your welding rods and what rods are you using. You hardly have a rod stick. Here in the US, we call it "stick" welding for a good reason. That is why we use MIG most of the time.
Probably 6013 rods, burn very easy, shallow penetration, 3/32” 6013 works pretty well on thin stuff.
One reason is to bend the rod is to get desire angle.
I was just about to ask them why they do not use a mig welder. Is stick welding that much cheaper? I also thought you get a better weld with a mig welder, am I wrong?
Amazing ❤❤❤❤❤❤
SUPERLATIV
Good work bro keep up again
a tank cap to lock and a drain plug for easy draining 😁
Atomic Power.
Stone Age.
think I would have made a pair of trestles by now ,,, but then again with only safety sandals maybe not , as things seldom fall up off the floor.
Dem shoes thou
Soldar sem máscara foi foda! Kkk
👍👍👍😎
Al menos este soldador utiliza zapatos!!!!
Does anyone wish things were still like this in the USA? Or better yet, wish you or we could be a part of a society like this? Looks like a better life than what our so-called progressive country has become.
I Feel you yes it probably would
@@HK-fz5rn yes English also I like it 👌
真強的動手能力👍
Гайхамшигтай сдакууд шүү
Good Mercedes Truck Or Scania Truck , new delhi in Flodia like sales
One of you bettwr video's. Works seem to care about the work they do.
👍
43계열의 피복아크 용접봉을 사용해서 내부 용접했을 때 슬래그와 스패터의 후처리는 어떻게 하는지.. 저 제품을 장착한 차량 연료 필터는 반드시 바로 교체 해야 할듯.
Don't show end at the beginning!!
燃料タンクの中亜鉛メッキ加工しないの？
fuel level？
U must use co2 welding
@@HK-fz5rn yes
what kind of welding machine do you use is it connected to a gas tank
Acetylene
Great welder, but future blind
日本製の燃料タンクみたいに亜鉛メッキ加工しないの？
👍👍👍🇷🇺
16:00 anjay surya 16 gaes
Welder should use bent electrodes for better quality 😂
How much of the slag from rhe welds stays in the tank?
And somebody buy him a chipping hammer.
And an actively vented helmet, especially for welding inside the tank.
I hope that is not an acetylene cylinder lying down, they should always be standing. The whole economy in these videos seem to be totally dependent on an arc welder and big hammers
In a way every economy depends on welders, from pipelines, to stainless kitchen tops in restaurants, structural welders, the list can go on and on.
Зачем они гнут электроды?
Ума нету .
Valla hasta ke veo uno que no trabaja con las patas y trae zapatos... milagro...
Согласен
Сварочная маска точно не нужна
А если варить прямым электродом? Не получится? 🤣🤣🤣🤣🤣
Вы когда нибудь варили электродами в труднодоступных местах
@@coldlight9776 там варят кривыми в АБСОЛЮТНО доступных местах😉
Его наверное с отопления, чисто на один бак дернули😂😁, это просто мышечная память! 😀
This work not good this duplicate worke ...
Si no trabajaran con las patas ya hubieran superado a los chinos
А где перегородки в баке
Эм... А на кой они? Там же все равно стаканы с фильтрами.
А заборник на дно? Чтобы воды хапнуть и сразу пригореть на все бабки. Ну и фильтра почаще менять.
Какие то перегородки . Горловина вообще от 200 литровой бочки . Интересно только зачем проушины под замок , у них же за воровство руки - ноги отрубают .
Where is this shop at 🤔🗯️ the phone number & address 🤔🗯️