I am going to try this for my freshwater sump setup. First time doing something like this but this design seems very usable and easy enough to customize per different setups. Thank you for this . . .
Sir from Philippines I would like to ask if suddenly the electricity shut off. Is the siphon automatically working when electricity return? please let me know. Thank you.
It should be possible, however I haven't try it yet..maybe in my next video i will test this out. Just need to make sure air dont get sucked in and break the siphon.
Hi sir, Thanks for the DIY overflow. I did the same for my aquarium. Though the air tube is taking lot of air and it is making lot of noise when air is getting sucked. What might be the reason.
Hiiiiii, awesome work. Thanks a lot for the tutorial. I've a doubt, what should the level of the air tube that goes to the water? It should be always inside the water, right? Like when the power goes and siphone stops at a level and when it happens the air tube should be immersed in water? Thanks in advance.
the air tube is used to break the siphon. its to allow air to go inside the overflow thus breaking the siphon. the air tube has to be slightly higher at the position where you want ur water to stop. this is where the inner tube position is inside the overflow.
Hello sir. I've done exactly as the second design. Once the siphon breaks and water level attains the level and stops, it couldn't able restart it's own in case of power failures. Can you able to help me? Thanks.
Hiiiii there bro, I have done it. it works fine in the first run, now i've to glue everything together. But i noticed something. The air tube, it's not sucking water in , there's still air in it. Then siphon works just fine and restarts automatically. My air tube level is just as you said, just above the water level. Is it a problem. If so please Help. Thanks in advance.
If you were to make both sides front and back the same way as you had built the first chamber over flow it'll look even better. Even tho the other way with the tubes side by side is simpler. It'll Make it look even more streamline... also it'll show where the water line levels out to
The only disadvantage I can see is that you can't clean it as everything is glued together. Hope there are parts where the assembly can be disassembled.
@tngo4042 subtitle is in english. And you can pause the video to get the list of item manually. Sorry, i wont be able to give you the full list. Like i said, everything is there in the video.
This are 25mm exact size pipes. The transparent pipe is 50mm. Which inlet? When power stops, the water will stop until the determine height. You can check out the "trailer" video to see how it works!
sya brminat dgan overflow ini kerana kadar ketinggian air dlm aquarium lebih mudah utk diubah. mengikut terletaknya ketinggian tube udara. penggiraan flow rate 3600 bersamaan kadar L/H pump? x masa penuh x volume air.
Terima kasih ilmunya. Saya ingin membuat hal serupa. Sebelumnya saya ingin bertanya, itu reducer ukuran 50mm to 25mm, tapi kenapa pipanya 20mm?,. Berapa cm panjang pipa 2 inc dan 20mm?, terima kasih 🙏
pipa pakai 20mm sebab tak cukup ruang untuk 25 mm pipa masuk kedalam pipa 32mm. kalau kamu tengok balik video saya, saya ada pakai satu socket connector saiz 20mm. ukuran pipa yang saya pakai mempunyai diameter yang sama..dimana bila saya cakap saiz 25mm, ukuran diameter dia betul2 saiz 25mm.
2000L/H. Klu buat double piping, blh support sampai 4500L/H. Kamu blh PM saya di facebook messenger nanti..sy blh kongsi details macam mana nak buat double piping
9000L/H ??!! Berapa besar tank kamu? Saya tak pasti mungkin kena cuba dengan saiz 32mm / 40mm ke atas kot. Klu pakai pump besar, lebih baik tebuk lubang kat aquarium.
If you look at my video again, my 20mm pipe is connected to a half-cut 20mm straight connector. The outer diameter of the 20mm straight connector is smaller than 25mm so you will need to use epoxy glue/hot clue to make it leak proof. Hope this piece of information is useful for you. And note that the piping that I used are having the exact size, when i say the pipe is a 20mm pipe, the outer diameter of the pipe is exactly 20mm when measure with a caliper.
Boleh je..yg penting kena tengok pump yg digunakan. Flow rate pump kena rendah daripada overflow. Klu flowrate tinggi (lebih daripada 4000, mungkin kena up kan size pvc pipe. Saiz lagi besar, flowrate lagi tinggi
Mau tanya, saya mau pakai sistem overflow, tank ukuran 120x60x60, sum filter uk 80x40x35, mesin 3000 lph, untuk ukuran pipa yg di pkai berapa cocok nya ya? Mohon bantuanya, terimakasih
Maaf bang, saya tak pasti apa yang kamu tak faham. Kamu boleh cuba contact saya dekat FB messenger, cari nama yang sama. Nak share gambar/video pun senang sikit.
Tapi kena tengok jugak setup masing2. Sbb setiap setup tak serupa, so outcome dia mungkin berlainan. Setiap pump pump berlainan, so ini satu anggaran sahaja..kena try baru tau
![DIY MINI PVC overflow for smaller size tank [Tutorial]](http://i.ytimg.com/vi/ZQPdexRrXyM/mqdefault.jpg)
![DIY Aquarium PVC Overflow [Tutorial] - English subtitle now available [15-1-2022]](/img/n.gif)
Terimakasih telah berbagi... sukses selalu untuk chanel ini. ❤
Excellent. A bona fide Malaysian inventor.
I am going to try this for my freshwater sump setup. First time doing something like this but this design seems very usable and easy enough to customize per different setups. Thank you for this . . .
Good luck on ur proj
great content, appreciate the hardwork
Thanks!
Saya dari indonesia...terimakasih ilmu nya... 👍👍👍...dan sangat bemanfaat....
Hi, ilmu kita kongsi sama-sama. Semua akan dapat manfaat daripadanya.
Good job friend for over flow thanks you for sharing your idea.
You are welcome. Sharing is caring!
Mantap sifu
Terima kasih x999
Kemas.
Saya DIY pakai bekas plastik biskut Raya yang tudung warna merah beli kat kedai RM2 tu je ... Hihihi
Sir from Philippines I would like to ask if suddenly the electricity shut off. Is the siphon automatically working when electricity return? please let me know. Thank you.
sangat inspiratif
Tq
Ya hice el mio me quedo bien gracias
Gracias, glad I could help!!
Awesome idea! Simple design but effective. I just wanted to ask if I can attach a surface skimmer into this system?
It should be possible, however I haven't try it yet..maybe in my next video i will test this out.
Just need to make sure air dont get sucked in and break the siphon.
Just a clarification needed. Do I need to suck out the air using a syringe for the first time like in the primer video?
Hi sir, Thanks for the DIY overflow. I did the same for my aquarium. Though the air tube is taking lot of air and it is making lot of noise when air is getting sucked. What might be the reason.
Means ur pump is having slower rate. U need to slow down ur overflow flow rate. When this overflow is functioning properly, it is quiet as a mouse!
@@TheStreamAffair thanks for the information. I have increased the overflow and now it is working well.
Hiiiiii, awesome work.
Thanks a lot for the tutorial. I've a doubt, what should the level of the air tube that goes to the water? It should be always inside the water, right? Like when the power goes and siphone stops at a level and when it happens the air tube should be immersed in water?
Thanks in advance.
the air tube is used to break the siphon. its to allow air to go inside the overflow thus breaking the siphon.
the air tube has to be slightly higher at the position where you want ur water to stop. this is where the inner tube position is inside the overflow.
@@TheStreamAffair thanks a lot brother. I will make it accordingly and let you know. Thanks a lot once again.
@@TheStreamAffair By doing so will the overflow system restart without priming again after the power comes back?
If done right, you only need to prime it once
good
Hello sir.
I've done exactly as the second design. Once the siphon breaks and water level attains the level and stops, it couldn't able restart it's own in case of power failures. Can you able to help me?
Thanks.
Hiiiii there bro,
I have done it. it works fine in the first run, now i've to glue everything together. But i noticed something. The air tube, it's not sucking water in , there's still air in it. Then siphon works just fine and restarts automatically. My air tube level is just as you said, just above the water level. Is it a problem. If so please Help.
Thanks in advance.
Hello sir, if the siphon break when the water level is low , will the siphon continue when the water level increase?
Yes, thats the whole purpose of this overflow system
If you were to make both sides front and back the same way as you had built the first chamber over flow it'll look even better. Even tho the other way with the tubes side by side is simpler. It'll Make it look even more streamline... also it'll show where the water line levels out to
I'm happy with the current design. If you can one that looks even nicer, then that's great!
Can u please make same video details again?
The only disadvantage I can see is that you can't clean it as everything is glued together. Hope there are parts where the assembly can be disassembled.
Anyway to get a Parts list? I wanna try building it but need parts, dimensions, etc
Thx in advance
Everything is mentioned in the video
@@TheStreamAffair Mentioned is different than listed and also not in English. Thx
@tngo4042 subtitle is in english. And you can pause the video to get the list of item manually. Sorry, i wont be able to give you the full list. Like i said, everything is there in the video.
@@TheStreamAffair All good, it’s not that difficult with overflow systems from your idea and others. Thx for the reply
What is the size of yhe pipes ? How do you make inlet ? Whst happened if electricity failed or return pump stopped ?
This are 25mm exact size pipes. The transparent pipe is 50mm.
Which inlet?
When power stops, the water will stop until the determine height.
You can check out the "trailer" video to see how it works!
@@TheStreamAffair the inlet you put inside of the aquarium.
Tat is a 32 to 25 reducer pipe and a cover with vents which can be bought.
Dear Sir, i try your method using 2 hoses inside for the siphon. However, the siphon stopped after operate a week or so. I am not sure what happen.
Contact me on FB and show me your setup. Most probably some leaking is happening. Did you seal ur fittings?
sya brminat dgan overflow ini kerana kadar ketinggian air dlm aquarium lebih mudah utk diubah. mengikut terletaknya ketinggian tube udara. penggiraan flow rate 3600 bersamaan kadar L/H pump? x masa penuh x volume air.
Terima kasih ilmunya. Saya ingin membuat hal serupa. Sebelumnya saya ingin bertanya, itu reducer ukuran 50mm to 25mm, tapi kenapa pipanya 20mm?,.
Berapa cm panjang pipa 2 inc dan 20mm?, terima kasih 🙏
pipa pakai 20mm sebab tak cukup ruang untuk 25 mm pipa masuk kedalam pipa 32mm. kalau kamu tengok balik video saya, saya ada pakai satu socket connector saiz 20mm.
ukuran pipa yang saya pakai mempunyai diameter yang sama..dimana bila saya cakap saiz 25mm, ukuran diameter dia betul2 saiz 25mm.
Hi boss, ada setup overflow with surface skimmer tak untuk cleaning permukaan air?
Overflow yg ni jenis sedut dari permukaan air.
th-cam.com/video/W7HaQbx7_fc/w-d-xo.html
@@TheStreamAffair memang tak boleh gabungkan bottom overflow dan surface skimmer ye?
Boleh gabung, tapi setup kena betul, klu tak gelembung udara boleh akibatkan overflow berhenti berfungsi
Berapa maximal pompa nak gunankan ini?
Saya nak tanya lagi...bisakah o vlo di letakan di bawah aquarim...tidak samping aquarium...biar nampak rapi
Boleh. Nak letak mana mana pun boleh.
@@TheStreamAffair bisa minta fb nya..biar saya bisa tanya lebih banyak
Cari nama yang sama di FB. Kamu boleh PM saya
Ukuran pipa berapa ya
Bila air kurang dari tube putih tu, kenapa bunyi dia bising sangat masa sedut. Apa cara untuk senyapkan?
Overflow ni memang senyap punya, ada bunyi sebab dia sedut udara nasuk, mesti ada sesuatu yg dah salah
hii....may i noe it how to set the water lvl tat we need for?
The position of ur overflow determines the level of the water. You can contact me on facebook (look for same name) to know more.
Bagus...👍
Setelah listrik padam, apakah over flow bisa menyedot otomatis (tidak perlu setting lagi)?
Ye. Tidak perlu buat apa apa..semua adalah automatic. Kalau ada masalah, message saya dekat FB. Cari page nama sama.
Terima kasih
Saya sudah buat seperti di video, tapi kok air tidak bisa kesedot setelah listrik padam. Apa yang salah?
Pm saya di facebook. Nanti saya tolong.
Ok
Hallo saya dari indonesia. Bagai mana cara mengatasi jika listrik padam? Bukan kah air dari main tank akan membanjiri sump tank hingga keluar?
Tidak. Sila tengok video dan faham macam mana overflow ini berfungsi. Segala jawapan ada di dalam video
I can't seem to find the video where you prime the system
th-cam.com/video/O9e8tHpbNwo/w-d-xo.html
Hello sir ..yang mana lebih efisyen?
Xbuat pre order k??
Ada. Klu nak pm saya kat fb messenger. Cari nama yg sama
Salam bos..sy nak cube buat..tp sy punya tak jadi selepas sy matikan pump mungkin air hose tu tak same level ..boleh bos explain skit kat sy bos..
Pm saya dekat FB messenger, cari nama yg sama. Nanti u share gambar/video setup kamu.
@@TheStreamAffair ok bos..sekejap sy cari bos..
hebat
Tq
Jika pump bawak rosak adakah air akan melimpah?
Tidak. Air akan berhenti sedut pada paras yang tertentu.
@@TheStreamAffair Adakah item itu dijual?
Kamu blh pm saya di facebook messenger. Blh cari nama yang sama.
Haii,,,reducer tu 50-20mm atau 50-25mm
Mana2 pun blh, tapi siaz kecil = flow rate rendah
versi ke 2 tu efficient tak?
Yang mana?
yg simplified version tu.. yg pakai hose pipe.. flow rate dia consistent tak
Consistent. Tak banyak beza. Lebih kurang sama je
berapa rate return pump yg sesuai utk demo tu?
2000L/H. Klu buat double piping, blh support sampai 4500L/H. Kamu blh PM saya di facebook messenger nanti..sy blh kongsi details macam mana nak buat double piping
Apakah Bisa untuk Aquarium 100x50x50 SumpFilter 80x30x30 ??
Boleh
Lebih bagus Cara Pertama/ke Dua ??
Tak de beza. Kalau mampu buat cara pertama, buat je design yang pertama. Cara kedua lebih senang nak buat.
Kalau untuk menghitung SumpFilter bagaimana agar tidak over,.
Sebab sumpfilter 4 chamber tinggi ke rendah..
Maaf tak berapa faham soalan kamu.
Bagaimana bila sy hendak gunakan mesin 9000 L/H?
Berape mm pipe sy harus gunakan?
Thanks for your advice..🙏🏻
9000L/H ??!! Berapa besar tank kamu? Saya tak pasti mungkin kena cuba dengan saiz 32mm / 40mm ke atas kot.
Klu pakai pump besar, lebih baik tebuk lubang kat aquarium.
Setuju.Baik tebuk pastu buat animal durso
Kalau elektrik tkde air akan melimpah kluar tk?
Ye, air tidak akan limpah keluar semasa tiada elektrik.
Is there any standard height for the acrylic pipe.? Please mention.Thank U sir
No standard height..its all based on ur own preference.
Itu nyedot nya supay air masuk ke overflow gimana?
Maaf, saya tidak berapa faham soal kamu
friend if the reducer is from 50mm to 25mm, you can't put 20mm tube into the 25mm reducer
If you look at my video again, my 20mm pipe is connected to a half-cut 20mm straight connector. The outer diameter of the 20mm straight connector is smaller than 25mm so you will need to use epoxy glue/hot clue to make it leak proof. Hope this piece of information is useful for you.
And note that the piping that I used are having the exact size, when i say the pipe is a 20mm pipe, the outer diameter of the pipe is exactly 20mm when measure with a caliper.
untuk pump ukuran 2500 l/h, berapa ukuran pipa yang cocok?
Boleh pakai pipa saiz l25mm
@@TheStreamAffair thank u very much sir...
Sama sama
Hi tuan, tak jual ke?
Klu tak dapat nak DIY sendiri, sy blh tolong DIY kan. Kamu blh contact sy dekat FB (cari nama yang sama).
boss tlg build kan 1 boleh kee?
Sy dah stop building, tak de masa
Ada yg jual jadinya ?
Untuk tank 4 feet, sesuai tak guna overflow ni ?
Boleh je..yg penting kena tengok pump yg digunakan. Flow rate pump kena rendah daripada overflow. Klu flowrate tinggi (lebih daripada 4000, mungkin kena up kan size pvc pipe. Saiz lagi besar, flowrate lagi tinggi
Bro ada jual lagi ke??
Ada, boleh message saya di fb messenger untuk more info
@@TheStreamAffair okey bos..
I discover another system quite close to urs I wonder are u able to diy the same thing... I can send u the pic if u r interested
Sure. U can reach me at FB page under the same name.
Nak tempah 1 boleh x bos?
PM sy kat FB messenger, sy tengok macam mana boleh tolong kamu.
Fb apa nama tuan?
Nama sama. Stream affair
Mau tanya, saya mau pakai sistem overflow, tank ukuran 120x60x60, sum filter uk 80x40x35, mesin 3000 lph, untuk ukuran pipa yg di pkai berapa cocok nya ya? Mohon bantuanya, terimakasih
Pakai 25mm, buat double piping. Kamu blh message saya di facebook, nanti saya tunjuk macam mana nak buat
@@TheStreamAffair siappp, terimakasih
salam cant understand this plz help
Cant understand which part?
@@TheStreamAffair every
I already share the step by step tutorial. Not sure which part you don't understand.
@@TheStreamAffair iner part of the tank
Maaf bang, saya tak pasti apa yang kamu tak faham. Kamu boleh cuba contact saya dekat FB messenger, cari nama yang sama. Nak share gambar/video pun senang sikit.
Bang boleh tahu kah berapa ribu per hour water pump kamu tu?
Single piping, blh pakai 3000L/H. Klu pasang dual piping kepada satu overflow blh support up to 4000L/H
Tapi kena tengok jugak setup masing2. Sbb setiap setup tak serupa, so outcome dia mungkin berlainan. Setiap pump pump berlainan, so ini satu anggaran sahaja..kena try baru tau
Ukuran PVC
bole listkan bahan2 x boss
Semua bahan2 dah list dalam video.
Apa fungsi overflow ni mister???
Untuk sedut air keluar tank utama anda..jika tidak mau tebuk lubang dekat aquarium anda..biasa digunakan untuk setup sump tank filtration.
Ada buat tempahan tak?saya akan bayar upah dan segalanya
Ada. Kamu blh PM saya dekat FB messenger. Cari nama yang sama.
English?
Hi, anything that I can help you with?
Apa facebook boss?
Cari nama sama, stream affair