Sounds like a current limiting device or likewise? I have the same table saw but I don't remember hearing this noise. Will try with a 2×3 when I get the chance.
Thank you for your comment, you did the right thing.. I cannot recommend this saw, I had a new replacement from Bosch last week that is exactly the same with the vibration problem.. and to make matters worse I cannot tighten the blade properly, and the blade came off during use, could have been extremely bad but luckily it wasn't. so now this replacement saw is going back to them on Monday, i would never buy another Bosch product again…
After seeing many videos on TH-cam having the same problem with vibration, it looks like it's a common problem.. you think Bosch would get this sorted.. Not Good at all.
Mine is stamped 03/2019. Contacted bosch straight away because of the vibration. They refused to acknowledge it as a problem, they just told me I should buy their expert blades to try reduce it. It did not help at all. The cuts are inaccurate and off angle because of the vibration, As it starts to vibrate the cut gets wider. I even sent them pictures of the cuts the bosch saw made vs my hikoki 36v circular saw that made flawless clean cuts when cleaving 45mm wood. I do not feel safe using this saw. look up on youtube, He goes over the problem and tries to fix it. Replacing some washers and stuff, kindof sketchy to swap stuff out that holds the blade. Bosch GTS 635-216: Vibrationen weg und Mutter fest dank Federscheibe | Nachdenksport
Thank you for the comment, I contacted Bosch a few days ago as mine is only 6 months old, and they picked it up yesterday under warranty to repair it... so see what happens, but I would never buy another Bosch so called professional tool.
Brand new replacement exactly the same.. video here.
th-cam.com/video/A0Od39D2H_k/w-d-xo.htmlsi=jlidiXF7dvWBp5Bw
Sounds like a current limiting device or likewise? I have the same table saw but I don't remember hearing this noise. Will try with a 2×3 when I get the chance.
Was just about to get this exact table saw. I won't now. Thanks for the info. But which one around this budget is any good?
@@imaginitivity7853 I'd go for the new evolution job site table saw, that's what I'll be getting to replace this.
Good review thanks for sharing the useful info 👍
Thank you for your great review. It helped me not to choose this saw.👌
Thank you for your comment, you did the right thing.. I cannot recommend this saw, I had a new replacement from Bosch last week that is exactly the same with the vibration problem.. and to make matters worse I cannot tighten the blade properly, and the blade came off during use, could have been extremely bad but luckily it wasn't. so now this replacement saw is going back to them on Monday, i would never buy another Bosch product again…
After seeing many videos on TH-cam having the same problem with vibration, it looks like it's a common problem.. you think Bosch would get this sorted.. Not Good at all.
Mine is stamped 03/2019. Contacted bosch straight away because of the vibration. They refused to acknowledge it as a problem, they just told me I should buy their expert blades to try reduce it. It did not help at all.
The cuts are inaccurate and off angle because of the vibration, As it starts to vibrate the cut gets wider.
I even sent them pictures of the cuts the bosch saw made vs my hikoki 36v circular saw that made flawless clean cuts when cleaving 45mm wood.
I do not feel safe using this saw.
look up on youtube, He goes over the problem and tries to fix it. Replacing some washers and stuff, kindof sketchy to swap stuff out that holds the blade.
Bosch GTS 635-216: Vibrationen weg und Mutter fest dank Federscheibe | Nachdenksport
Thank you for the comment, I contacted Bosch a few days ago as mine is only 6 months old, and they picked it up yesterday under warranty to repair it... so see what happens, but I would never buy another Bosch so called professional tool.
@@CALtheSPAR Any improvement?
@@notanaive I've had a brand new replacement and it's exactly the same, i will have a video up towards the end of the week.