Excellent video. And thank you for sharing that the HO pump piston is the part from the 461. I just replaced the pump piston on my 441 but now realize I was sent the correct control bolt but the pump piston was exactly the same as my old one even though it came in a paper packet with the right part number on it. Got ripped off. But at least now I know what to look for and what to order. Thanks for taking the time to make this video. Well done.
Super informative video Rod !! I hadn’t seen anyone do this procedure before, most just swap out the oiler from a 461 - complete. I like the way you did it 👍 Great camera work too ⛓🪚👍👏🇺🇸 Rick
Excellent video. Very informative. I've never been that far into a saw. I agree more oil on the bar and chain is better, the oil doesn't do any good in the jug. 👍🏻
Hey Rod , very nice video . A lot of great info . I also usually put a new e clip in my stuff because I launch them into never never land when I am removing them . I like my oil to run out at the same time as my fuel . Have a good one my friend !!! 👍🏻🇺🇸
I launched one the other day . Thank god for editing . I believe TH-cam would have banned me for life . I wish you were going to be at the Bunyan show but I understand . Have you found a garden tractor yet ?
Nice one! My lil ms 250 is a different much simpler design. I learned a lot taking it apart many times trying to fix my mistakes knock off parts and silly mistakes. Learned a lot and in the end it was fun learning. Oem in my case was much better. Satisfying fix. Sounds like a great upgrade! Have a great day!
Thanks Stan! Can’t go wrong with OEM. Still haven’t ran it since the upgrade but it should good to go now. Gonna do I little cutting here in a couple days. Appreciate ya watching!👍🏻
FWIW, IMO the stock MS400 didn't oil a 25" bar very well. I replaced the stock oil pump with a holzforma import. That cheap arse pump works like the original should have!! Regardless, I'll order the Stihl HO parts and rebuild the original. It's a shame Stihl doesn't put the HO pump on the mighty MS400.
HAY ROD, COOL D.I.Y. VIDEO... I JUST REPLACED THE CHAIN ON ONE OF MY SAWS TODAY' THE FOLKS DOIN' THE CABINS USE THE F*** OUT OF IT. THE BLADES WERE SO WORN, THAT THEY WERE ALMOST NON-EXISTENT. DID YOU GET THE PICTURES??? IF NOT, I'LL SEND THEM AGAIN. OR BETTER YET, I'LL TAKE SOME NEW ONES... STAY COOL BROTHER... PEACE...
Well explained n executed,but just use the pliers to push in the last C clip ! Gentle is the norm😊
Thankyou for your time
Thanks for watching!👍🏻
Great video Rod!
Thanks for watching Bobby!👍🏻
Excellent video. And thank you for sharing that the HO pump piston is the part from the 461. I just replaced the pump piston on my 441 but now realize I was sent the correct control bolt but the pump piston was exactly the same as my old one even though it came in a paper packet with the right part number on it. Got ripped off. But at least now I know what to look for and what to order. Thanks for taking the time to make this video. Well done.
Thanks Kent! Great to hear the video helped you out. Hearing from guys like you makes it worth while! Thanks again!👍🏻
My 462 usually has bar oil left too after the gas runs out. Not trying too save money on bar oil 😂, I love it! Take Care Rodd!
Should have a little left. I would have 1/4 tank left. That’s a bit much. Appreciate ya watching Don!👍🏻
My 400 has about 1/2 tank of oil left with the factory oiler turned all the way up. Mostly cut dead hardwood and it can't even oil a 20 :(
Great job Rod! Very detailed work, definitely should pump more oil!!👍🇺🇸👍
Yep, sure should. We’ll find out here in a couple days. Appreciate ya watching Jeremiah!👍🏻
Nice job on the install. Great video to follow for anyone interested in doing the upgrade.👍🏻👍🏻FM
Thanks! Ya, If anyone is interested. 🤣 Appreciate ya watching Todd!👍🏻
Super informative video Rod !! I hadn’t seen anyone do this procedure before, most just swap out the oiler from a 461 - complete. I like the way you did it 👍 Great camera work too ⛓🪚👍👏🇺🇸 Rick
I don’t always do things the easy way Rick. 🤣 I thought this way was more interesting I guess. Appreciate ya watching!👍🏻
Excellent video. Very informative. I've never been that far into a saw. I agree more oil on the bar and chain is better, the oil doesn't do any good in the jug. 👍🏻
Thank you Mr Douglas! That’s as far as I go buddy!😁 more oil =good. Thanks for watching!👍🏻
Cool video !
Good vido and well explained Rod.
Thanks for showing us. 😁👍
Thanks for watching Daniel!👍🏻
Some awesome engineering how that little pump works. 👍🏼
Yes it is! Appreciate ya watching John!👍🏻
Hey Rod , very nice video . A lot of great info . I also usually put a new e clip in my stuff because I launch them into never never land when I am removing them . I like my oil to run out at the same time as my fuel . Have a good one my friend !!! 👍🏻🇺🇸
Ya, those little suckers can take off! 🤣 Appreciate ya watching! Have fun at Bunyan! Be safe!👍🏻
I launched one the other day . Thank god for editing . I believe TH-cam would have banned me for life . I wish you were going to be at the Bunyan show but I understand . Have you found a garden tractor yet ?
Nice one! My lil ms 250 is a different much simpler design. I learned a lot taking it apart many times trying to fix my mistakes knock off parts and silly mistakes. Learned a lot and in the end it was fun learning. Oem in my case was much better. Satisfying fix. Sounds like a great upgrade! Have a great day!
Thanks Stan! Can’t go wrong with OEM. Still haven’t ran it since the upgrade but it should good to go now. Gonna do I little cutting here in a couple days. Appreciate ya watching!👍🏻
Great info
Thanks Dave! Appreciate ya watching!👍🏻
@@FirewoodMidwest my pleasure
I ad a dash of diesel to the bar oil
FWIW, IMO the stock MS400 didn't oil a 25" bar very well. I replaced the stock oil pump with a holzforma import. That cheap arse pump works like the original should have!! Regardless, I'll order the Stihl HO parts and rebuild the original. It's a shame Stihl doesn't put the HO pump on the mighty MS400.
Don't scuff up the brass bushin....whoops 😂 great job. I would've f'd it up for sure
Lol! No kidding! I’ll never have to take them out again so I’m alright! 😁 Appreciate ya watching Max!👍🏻
Nice video. Thanks. Wd recommend a little white lithium in roller bearing. Worm gear is name.
Thanks for the tip! Appreciate ya watching!👍🏻
Hey, thanks a lot. Can you measure length and diameters of the pump shaft? Checking whether the shaft would fit my 261 as well
I believe a 362 is the smallest saw it will fit. Appreciate ya watching!👍🏻
@@FirewoodMidwest thanks!
HAY ROD, COOL D.I.Y. VIDEO... I JUST REPLACED THE CHAIN ON ONE OF MY SAWS TODAY' THE FOLKS DOIN' THE CABINS USE THE F*** OUT OF IT. THE BLADES WERE SO WORN, THAT THEY WERE ALMOST NON-EXISTENT. DID YOU GET THE PICTURES??? IF NOT, I'LL SEND THEM AGAIN. OR BETTER YET, I'LL TAKE SOME NEW ONES... STAY COOL BROTHER... PEACE...
Thanks GRINGO! Ya, I got the pics. I answered your email. Sometimes I don’t think my email works right all the time.🤷🏻♂️ Appreciate ya watching!👍🏻
I like your new video you did a good jop are you make a video when you fire up wood stove I love your video good jop buddy 🍺🍺
Thanks Travis! Appreciate ya watching!👍🏻
Are you make a video you fire up your outdoor wood stove buddy 🔥
When are you going to fire up your outdoor wood stove when are you going to make a video for that buddy
What size nail did you use, I'm struggling to get the pin out.
Not sure of the size. It was just a small trim nail I had on hand.
So a ms461 stock oiler is a ho oiler for this saw or are there two different oilers?
Yes, stock 461 oiler is a HO.Appreciate ya watching Erik!👍🏻
Thank you much appreciated
So did it make a difference?
Most definitely! Appreciate ya watching!👍🏻
Hello Rod, 👏 good video, good description Take Care🪵👍🏼🇺🇸
Thanks Larry and Robin! Appreciate ya watching!👍🏻