I just wanted to take a moment to say how amazing your video was! I was really impressed with the quality of the footage, the editing, and the overall presentation. You did a great job of explaining the topic in a clear and concise way, and I learned a lot from watching your video. I also really appreciated the way you made the video engaging and entertaining. You kept my attention throughout the entire video, and I never felt bored or lost. I would definitely recommend your video to anyone who is interested in learning more about the video.
@@FrenchWatchCollector Production values are superb. Commentary is very informative. I think you should have miles more subscribers. Hopefully the word Rolex will up your viewer counts!
Another excellent adventure! I would have liked to see more detail on the problem of the cannon pinion that led to the issue near the end. How did you decide that this was the source of the problem and how exactly did you fix it? Merci beaucoup!
The canon pignon is the parts that dictates a lot of things between the hands. With the right friction amount it makes sure that the hour and minute hand stay in tune. I just made it a bit tighter to increase the friction
Thank you for sharing this. I have a 2002 Y series. My appreciation for the model increased by a 100% from this video. Would be great to see a comparison between different GMT movements. Like a Rolex GMT, CW GMT and a Tudor or Seiko GMT. Again, many thanks! 👌
If you put a little bit of winding pressure from the crown while removing the automatic system it wont fly off like that. Very nice video and this is a beautiful watch.
great video. lets pick the balance bridge for instance. isn't it better for the screws on a bridge piece to screw one screw 50% in then do other screw 50% in, then keep going alternatively until both are 100% tight? rather than screw one in 100% then go to other screw? see what i mean? i read years ago factories like to do my method to save torquing on pieces etc. i have this watch, model v series 2010 model i love it, beautiful
Superbe vidéo et très bon travail ! J'avais une question concernant le mouvement 3185 : Le fait de faire tourner l'aiguille des heures en anti horaire pour faire revenir la date en arrière risque t il d'abimer le mouvement ? Englsih for the international Community : Does jumping the date backward damage the caliber 3185 ? Amazing job on this video by the way !
I have a question: my 16570 explorer is running great, date functions, gmt hand functions, etc..however, when winding the watch with no power left, the winding the crown is tough. Takes a lot of effort and not buttery smooth like my similar GMT master with same movement. Not crunchy. But like your pushing a car up a hill, resistance. Do you think it needs full service? Suggestions?
You see first at the beginning the change is not fully jumping and later on around 33min when I use the GMT fonction to just change the hour hand one by one hour at it should be on a GMT the minute hand and the GMT should stand still but the move. This is why I adjust this with the lanterning of the canon pignon.
@@FrenchWatchCollector Yes I saw the issue but didn't really understand the solution. I'll research "lanterning" to see if I understand what you did. Thanks for the great video!
@@FrenchWatchCollector I'm just surprised you go through all that trouble meticulously taking apart the watch, then when it comes to the minute hand at midnight you accept good enough 🤷🏻 all Rolex watches have an instantaneous date change exactly at midnight.
@@shamrocky it cannot be exactly midnight. The tolerance for a brand new rolex is -1 minute +2 minutes for the date change. It is like be at +/- zero secondes per day it doesn't exist
Very informative. Thank you. BUT, as a professional, why wind crown with ONE FINGER?!! You can actually watch how that bends the stem. Grrrrr. Extremely hard to watch. Lost all respect for this kind of prefessional. Like putting a watch down so watchback gets in contact with bracelet thus scratching caseback. Disrespectful at best.
My biggest pep pev is a watch that doesn't jump exactly at midnight. Sorry but as a watch lover you need to fix your skills. 2 mins before is unexceptable
I just wanted to take a moment to say how amazing your video was! I was really impressed with the quality of the footage, the editing, and the overall presentation. You did a great job of explaining the topic in a clear and concise way, and I learned a lot from watching your video.
I also really appreciated the way you made the video engaging and entertaining. You kept my attention throughout the entire video, and I never felt bored or lost. I would definitely recommend your video to anyone who is interested in learning more about the video.
The best watchmaker on TH-cam! Thank you for making these videos and giving us an eye into this fascinating world.
Thanks
@@FrenchWatchCollector Production values are superb. Commentary is very informative. I think you should have miles more subscribers. Hopefully the word Rolex will up your viewer counts!
Wow i am in awe of your skill, i did not realise what was involved in servicing a watch. Thank you i really enjoyed your video
Thank you
Fantastic work mate 👏 I've always wanted to see this iconic watch restored
Glad you liked it
One of the best watchmakers on youtube thank you!
Thank you
All these beautiful watches i love your work
Thank you 😊
Beautiful watch
I love it too
Magnifique work, - Tres bien. Great movement and great service to the iconic Exp II. Great to see it up and running as it should. Kudos
Thank you
Hello, what a nice video on a very very nice mechanism , first time to see this caliber on service! lucky me and lucky you for this opportunity! 10x
👍
Great work 👏
Thank you
Thank you so much for your work
It is my pleasure
One of my top ten favourite watches❤
It is a nice one
I have this model so really enjoyed watching your video! I also like your narration as well! Very nice and thanks for sharing! 😊
Thanks for watching
Thx great video. What a great watch
👍
great video
Thanks
Great job!!
Thank you
It's a nice Aegler movement.
Perfect and a great repair service. Keep well from New Zealand 🇳🇿
Thank you Bruce
Great video as always. For future I would like to see how you are fixing issues. Thanks
Excellent videos! What a great idea for the hour hand alignment, Thank you!
Thank you
Great video and very informative.
Glad you enjoyed it!
5:17 the first time I removed the rotor with tweezers I broke the rotor jewel. Since then I always use rodico to lift it straight up
Good tip
Great to see your development and upgrading into nicer watches, thanks for sharing
Thanks
Another excellent adventure! I would have liked to see more detail on the problem of the cannon pinion that led to the issue near the end. How did you decide that this was the source of the problem and how exactly did you fix it?
Merci beaucoup!
The canon pignon is the parts that dictates a lot of things between the hands. With the right friction amount it makes sure that the hour and minute hand stay in tune. I just made it a bit tighter to increase the friction
Thank you for sharing this. I have a 2002 Y series. My appreciation for the model increased by a 100% from this video. Would be great to see a comparison between different GMT movements. Like a Rolex GMT, CW GMT and a Tudor or Seiko GMT. Again, many thanks! 👌
You are welcome
If you put a little bit of winding pressure from the crown while removing the automatic system it wont fly off like that. Very nice video and this is a beautiful watch.
Thanks for the tip
great video. lets pick the balance bridge for instance. isn't it better for the screws on a bridge piece to screw one screw 50% in then do other screw 50% in, then keep going alternatively until both are 100% tight? rather than screw one in 100% then go to other screw? see what i mean? i read years ago factories like to do my method to save torquing on pieces etc. i have this watch, model v series 2010 model i love it, beautiful
I know what you mean because it is used a lot in mechanic but it is not sure a lot in watchmaking. Not sure why
Superbe vidéo et très bon travail ! J'avais une question concernant le mouvement 3185 : Le fait de faire tourner l'aiguille des heures en anti horaire pour faire revenir la date en arrière risque t il d'abimer le mouvement ?
Englsih for the international Community :
Does jumping the date backward damage the caliber 3185 ? Amazing job on this video by the way !
Non cela n’est pas un problème car vous avez aussi à changer l’heure ou la date en arrière si vous voyer avec une gmt
Can you treat the watch with more care?
Care to explain?
I have a question: my 16570 explorer is running great, date functions, gmt hand functions, etc..however, when winding the watch with no power left, the winding the crown is tough. Takes a lot of effort and not buttery smooth like my similar GMT master with same movement.
Not crunchy. But like your pushing a car up a hill, resistance.
Do you think it needs full service? Suggestions?
Depend when is your last service. You might have a dried up seal or a dried up automatique winding system
huh. I had an exp 2 for 4 years, never realized the GMT hand is on top of the local hour hand on the handstack
Watched to the end and still didn't understand what the issue was 😂 what was the "lanterning" you did to solve it?
You see first at the beginning the change is not fully jumping and later on around 33min when I use the GMT fonction to just change the hour hand one by one hour at it should be on a GMT the minute hand and the GMT should stand still but the move. This is why I adjust this with the lanterning of the canon pignon.
@@FrenchWatchCollector Yes I saw the issue but didn't really understand the solution. I'll research "lanterning" to see if I understand what you did. Thanks for the great video!
TH-cam subtitles tells us that its a nice tool even if we are obese 2:47 😢
Weird translation. They are automatic so maybe with my accent it did not work in this case
I have this same watch
Nice one
@@FrenchWatchCollector purchased new in 1997 still wearing it today. Serviced twice
@@FusilierInsuranceservices it will last generations if maintained properly
You left something on the table when you put in all the parts in the cleaning baskets.
Yes it is just a small spring that doesn't need to be clean
I think that you must remove hand by hand, to all at the same time 😊
It can makes more damaged to remove them one by one
To many parts fly around… you’re fired!
Santé, I have a question, those black hands from Rolex Explorers, is that stainless steel with some coating on top or is paint?
Not sure but the finish is very nice and it looks very solid
@@FrenchWatchCollector Merci
How long did this one worked without service? And why does the amplitude stay so high? Surprising that even mint condition Rolex has its issues :)
It is good that the amplitude stay high. I would say you should service a modern rolex around 8 years. Depends how you wear it as well
There's no comparison between one of these movements and an eta movement.
For sure
👏👌👍!
2 min before midnight isn't perfect 🤔
It is very close to be prefect
@@FrenchWatchCollector I'm just surprised you go through all that trouble meticulously taking apart the watch, then when it comes to the minute hand at midnight you accept good enough 🤷🏻 all Rolex watches have an instantaneous date change exactly at midnight.
@@shamrocky it cannot be exactly midnight. The tolerance for a brand new rolex is -1 minute +2 minutes for the date change. It is like be at +/- zero secondes per day it doesn't exist
Very informative. Thank you.
BUT, as a professional, why wind crown with ONE FINGER?!! You can actually watch how that bends the stem. Grrrrr.
Extremely hard to watch. Lost all respect for this kind of prefessional.
Like putting a watch down so watchback gets in contact with bracelet thus scratching caseback. Disrespectful at best.
My biggest pep pev is a watch that doesn't jump exactly at midnight. Sorry but as a watch lover you need to fix your skills. 2 mins before is unexceptable
You know even a brand next Rolex done by robots is not jumping exactly at midnight. They have a tolerance of three minutes
@@FrenchWatchCollector every watch I ever owned. Rolex to Hamilton jumps exactly at midnight.
At the end when you moved the jumping hour hand the gmt hand was shaking
@@ChrisKerfoot-cq8hs They are connected so when you are on a macro shot you see them moving a tiny bit