I just offset the aileron servo arms one tooth toward the leading edge of the wing and lengthen the pushrods so that the ailerons are centered. Or, you can move the aileron control horns back from the hinge line a little and that will also create differential throw. Creating differential by altering the linkage geometry eliminates the need to use two channels and doesn't decrease the throw of the servos in the downward direction which decreases the resolution of the system.
![ไลฟ์สุ่ม iPhone 295 บาท... โกงมั้ย?[ โกงมั้ยครับ ep.97 ] | DOM](http://i.ytimg.com/vi/gdstHEE4UUE/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 86 | คู่เอก "คมเพชร vs ชาติพยัคฆ์"](http://i.ytimg.com/vi/m3q_dRYDuU8/mqdefault.jpg)
Thanks again Mike! Setting up my Volantex ASW28 and these videos are extremely helpful!
I just offset the aileron servo arms one tooth toward the leading edge of the wing and lengthen the pushrods so that the ailerons are centered. Or, you can move the aileron control horns back from the hinge line a little and that will also create differential throw. Creating differential by altering the linkage geometry eliminates the need to use two channels and doesn't decrease the throw of the servos in the downward direction which decreases the resolution of the system.
what are the 9 controls on the left of the screen that have percentages with them?
How do those percentages get set?
At 1:59, it shows Differential in the menu. However, that menu option is not available on my DX9. Where did it go?
Under System Setup; under Aircraft Type It needs to be set up as Dual Ail, or the Differential option is not available.
Joe Cochran Thanks Joe!
Thankyou so much for your very helpful vidios