I haven't used my DX6 for 4 years and I just is charged the battery and all I get it is the following warning, ' Warning throttle high, warning stunt one. ' I can't get beyond that when I turn the transmitter on. Any idea what's wrong?
Hi Mike. I get a Voice and written warning " WARNINGS ESC. 0.0 0.0A 32.0 F" It will disappear and I get the usual main screen. When I'm in the air my motor will pulsate. Any insights as to what is causing this? Thanks. Bob Katz
HELLO, I BUY LAST DAYS THE DX 18 G2.THE PROBLEM I HAVE IS WITH WARNINGS.I USE THE THROTTLE STICK REVERCE.THE RADIO MAKE THE SERVO REVERCE BUT THE WORNIG OF HIGHT THROTTLE DOSEN'T REVERCE SO AT MY LOW THROTTLE SAYS THROTLE HIGHT.HOW I GOING TO FIX THAT. THANKS ANDREAS
Mike, I was scrolling thru my menu and now voice warning is saying no model signal? I have no idea of how to stop it, can you help me. I am using DX6 6 - channel 2.4 GHz DSMX
I have new DX7 , when i setup up the Voice and click on the TEST button it doesn't do anything , when i flip the switches nothing happen. when i scroll the menu i hear sound so the speaker must be working but no Voice , Somebody help me ?
I accidentally set warnings to every one of my flight modes. Now I can't acces my system setup screen to change it cause when I turn on my transmitter it gives me the warning no matter what mode I'm in. What should I do??!
It's. been a year. So hope your found help on this. I did it that same thing last night. Turn off your transmitter. Press and hold the scroll button. Then while holding your scroll button turn on the transmitter. It will fire up in the system menu. From there you can fix the issue.
Hi I have the spektrum dx9 with the latest software and pretty much 60% of the voice command doesn't transfer to desired stick. Like the half way you get silent any sounds above silent works fine and there are like 5 voice command after silent works and the rest doesn't. I really need beginner mode , intermediate Mode and Advance mode. I need stability mode. I have just got in to flying and got myself a Eflite sportsman s and I need the I switch to have the stability mode and the E stick to have beginner mode , intermediate Mode and Advance mode. None of them voice command transfers. I have done everything emailed horizonhobbies no reply asked for help on their Facebook page no comment. I just don't know what's the problem. I bought the transmitter Dx9 14 month ago and it's been in the box till now I have time to use it it's honestly the first time I have used it I haven't even used it to fly yet as I'm a beginner. I bought the transmitter cause of the voice command. Plz help.
Mike Lee - Well done as usual! Even though I'm see this 4 years late! LOL
Very Informative one of the best videos I have seen on this subject.
I haven't used my DX6 for 4 years and I just is charged the battery and all I get it is the following warning, ' Warning throttle high, warning stunt one. ' I can't get beyond that when I turn the transmitter on. Any idea what's wrong?
Hi Mike. I get a Voice and written warning " WARNINGS ESC. 0.0 0.0A 32.0 F" It will disappear and I get the usual main screen. When I'm in the air my motor will pulsate. Any insights as to what is causing this? Thanks. Bob Katz
HELLO, I BUY LAST DAYS THE DX 18 G2.THE PROBLEM I HAVE IS WITH WARNINGS.I USE THE THROTTLE STICK REVERCE.THE RADIO MAKE THE SERVO REVERCE BUT THE WORNIG OF HIGHT THROTTLE DOSEN'T REVERCE SO AT MY LOW THROTTLE SAYS THROTLE HIGHT.HOW I GOING TO FIX THAT.
THANKS ANDREAS
Mike, I was scrolling thru my menu and now voice warning is saying no model signal? I have no idea of how to stop it, can you help me. I am using DX6 6 - channel 2.4 GHz DSMX
how come there is no choke on or off. I have a gas plane with a servo operated choke
I have new DX7 , when i setup up the Voice and click on the TEST button it doesn't do anything , when i flip the switches nothing happen. when i scroll the menu i hear sound so the speaker must be working but no Voice , Somebody help me ?
A question plz. The voice volume is soo low compared with the beep tone in my d8 gen2. Does this happen to everyone ? If not, how to fix that? Thanks.
SunSon29 same here
Michael Rapp I just ignore it after all. Maybe it just like that....
I put the volume and the beep to the r nob..
I accidentally set warnings to every one of my flight modes. Now I can't acces my system setup screen to change it cause when I turn on my transmitter it gives me the warning no matter what mode I'm in. What should I do??!
It's. been a year. So hope your found help on this. I did it that same thing last night. Turn off your transmitter. Press and hold the scroll button. Then while holding your scroll button turn on the transmitter. It will fire up in the system menu. From there you can fix the issue.
@@thisisyourcaptin ty...
How about adding "mode zero" you have 1 through 9 but no zero.
Hi
I have the spektrum dx9 with the latest software and pretty much 60% of the voice command doesn't transfer to desired stick. Like the half way you get silent any sounds above silent works fine and there are like 5 voice command after silent works and the rest doesn't. I really need beginner mode , intermediate Mode and Advance mode. I need stability mode.
I have just got in to flying and got myself a Eflite sportsman s and I need the I switch to have the stability mode and the E stick to have beginner mode , intermediate Mode and Advance mode. None of them voice command transfers. I have done everything emailed horizonhobbies no reply asked for help on their Facebook page no comment. I just don't know what's the problem. I bought the transmitter Dx9 14 month ago and it's been in the box till now I have time to use it it's honestly the first time I have used it I haven't even used it to fly yet as I'm a beginner.
I bought the transmitter cause of the voice command.
Plz help.
I have same problem. Got flap position voices on B, got gear position voice on A but add voices to E and no sound is made. Makes no sense to me.
This guy needs a chill pill lol
Yeah, that whole drum thing in the background is extremely annoying. I competes with what you are saying. Ugh.
Ya, Mike! Can you tone-it-down, you are way to obnoxious.