Setting Up Your Device

1. Screw the applicator head onto the device. Turn it clockwise until it's securely tightened.
2. Plug one end of the cord into the device. It should fit snugly into the designated port.
3. Use the black ring provided to screw onto the cord connection point. This secures the cord firmly in place.
4. Set the handpiece down into the holder. Ensure it rests securely.
5. Double-check all connections and tightenings to ensure everything is securely in place.
6. Your device is now set up and ready to use.Turn On Device: Locate the button on the left-hand side of the device and press it. This will bring you to the home screen.
7. When prompted, enter the passcode. The default passcode could be either "123", "1234", or "12345", depending on your device.
8. On the home screen, you'll see three main settings: Power, Frequency, and Target per treatment.
9. Power is measured in Mega joules per millimeter squared. Use the controls to adjust the power settings from 0 to 25 as desired.
10. Frequency determines the number of pulses. Higher frequency means more pulses, lower means fewer pulses.
11. The target setting determines the number of pulses desired for the treatment.
12. Once settings are adjusted, press the start button to begin sending pulses for the treatment.