is it possible to click to call from computer ? i dont want to manually compose the number but instead i want to click on a phone number on my computer and it make the call for me. is it doable?
The incoming voice message can be changes by pressing the fixed mailbox key (envelope icon), followed by pressing the 'Voice Messages' key on the screen. Follow the voice prompts from the system and choose 'Mailbox Options.' From there you have access to change your incoming message. If your phone is being set-up from default, you will need the system password to begin programming the voicemail. You can get this password from your system administrator.
Could you try to disable DND through the forwarding menu? You can access the forwarding menu with the key at the top right of the screen. This video walks through canceling the forward feature at the 14:36 mark, this may be how your phone was set to DND.
how to get the list of incoming calls will be appreciated. The number of the incoming call disappears in few seconds. Can you explain me how to trace the numbers of the incoming calls ? thank you
You can access the call history by pressing the messaging key in the bottom right of the phone. After pressing the messaging key you'll likely see an option for "Call Log" or "Calls" on the screen. There are slight variations depending on the software you are running, but I believe you'll be able to access the call history from here.
The default password was assigned when the system was installed. You'll need to speak with the person who manages or installed the phone system to find the password.
If the phone is deployed on an OXE platform, the system administrator will need to edit the time. On an OXO system, you can edit the time from an attendant station. To do so: 1) Select ‘Menu’ 2) Select ‘Operator Session’ 3) Enter the attendant password 4) Select ‘Clock’ 5) Use the arrows on the navigation array to move the cursor to the beginning of the time 6) Type over the existing time using military/24 hour clock
I have the Alcatel-Lucent 8028 from a former colleague. The message light keeps blinking but it's password protected so i cannot stop the light from blinking. Is there any way i could find out what the admin password is or how i can change it without knowing the current password? My office's IT department doesn't know what to do either. Thanks so much!
Puck, it depends on whether you are using the 8028 phone on an OXO or OXE phone system. If you are using an OXE, the system administrator will need to change the password. If it is an OXO, the password can be changed from an 8038, 8068 or 8039 phone that is designated as an operator station. If the phone is an operator station there will be a key labeled “operator” on the screen. To change the password of an extension from an operator station: 1. Choose ‘Operator’ 2. Choose ‘Subscriber’ 3. Enter the extension number for the phone that will be reset 4. Choose ‘PwdRes’ Once the password has been reset, the messaging key on your phone will continue to flash until you initialize the mailbox. Press the messaging key on your phone and follow the prompts to initialize the mailbox with your own greeting and password.
I responded above, but in case someone else sees this comment first, could you try to disable DND through the forwarding menu? You can access the forwarding menu with the key at the top right of the screen. This video walks through canceling the forward feature at the 14:36 mark, this may be how your phone was set to DND.
Auto-answer is enabled/disabled with the mute key. When the station is idle (no active call) press the mute key. The blue LED above the mute key will light-up, indicating auto-answer is active. Press the mute key again when the station is idle to turn the LED off and deactivate auto-answer.
This would be achieved by programming each phone's extension with the appropriate room number, but would have to be completed by your installing distributor who has access to the system database.
Hilton, are you looking to reset the station name and password for a new user, or are you looking to completely reset all of the network addressing on the phone?
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
Dear,
How to set on screen when somebody is calling, options where i can see number what is calling.
Kind regards
is it possible to click to call from computer ? i dont want to manually compose the number but instead i want to click on a phone number on my computer and it make the call for me.
is it doable?
Every 5 second "Wakeup problem"
Pop up massage display in Alcatel 8058/8028.
How to solve these error
it showing feature reject when i want to make my phone in forwarding if I'm busy
Suddenly few of my 8038 phones ...volume increase and decrease key not working can u please let me know how to relsove the issue @icon
Its an oxe system
Are you attempting to adjust the volume of the handset, the speakerphone or the ringtone?
how to log off the current user from the desk phone device Alcatel 8068 and log in a new user in?
How can I password forget new adjust password can u
Good night, how can I unlock because I forgot my unlock password?
How do I set up my incoming voice message?
The incoming voice message can be changes by pressing the fixed mailbox key (envelope icon), followed by pressing the 'Voice Messages' key on the screen. Follow the voice prompts from the system and choose 'Mailbox Options.' From there you have access to change your incoming message.
If your phone is being set-up from default, you will need the system password to begin programming the voicemail. You can get this password from your system administrator.
If the phone showing that (do not disturb) out going can call but incoming call cant call what is the sulotion
Could you try to disable DND through the forwarding menu? You can access the forwarding menu with the key at the top right of the screen. This video walks through canceling the forward feature at the 14:36 mark, this may be how your phone was set to DND.
how to get the list of incoming calls will be appreciated. The number of the incoming call disappears in few seconds. Can you explain me how to trace the numbers of the incoming calls ? thank you
You can access the call history by pressing the messaging key in the bottom right of the phone. After pressing the messaging key you'll likely see an option for "Call Log" or "Calls" on the screen. There are slight variations depending on the software you are running, but I believe you'll be able to access the call history from here.
Hi! I have new Alcatel-Lucent 8028 IP Phone. What is the deffault passworв oni this phone???
The default password was assigned when the system was installed. You'll need to speak with the person who manages or installed the phone system to find the password.
How to adjust the time on the 8029, it's not the correct time
If the phone is deployed on an OXE platform, the system administrator will need to edit the time.
On an OXO system, you can edit the time from an attendant station. To do so:
1) Select ‘Menu’
2) Select ‘Operator Session’
3) Enter the attendant password
4) Select ‘Clock’
5) Use the arrows on the navigation array to move the cursor to the beginning of the time
6) Type over the existing time using military/24 hour clock
I have the Alcatel-Lucent 8028 from a former colleague. The message light keeps blinking but it's password protected so i cannot stop the light from blinking. Is there any way i could find out what the admin password is or how i can change it without knowing the current password? My office's IT department doesn't know what to do either. Thanks so much!
Puck, it depends on whether you are using the 8028 phone on an OXO or OXE phone system. If you are using an OXE, the system administrator will need to change the password. If it is an OXO, the password can be changed from an 8038, 8068 or 8039 phone that is designated as an operator station. If the phone is an operator station there will be a key labeled “operator” on the screen. To change the password of an extension from an operator station:
1. Choose ‘Operator’
2. Choose ‘Subscriber’
3. Enter the extension number for the phone that will be reset
4. Choose ‘PwdRes’
Once the password has been reset, the messaging key on your phone will continue to flash until you initialize the mailbox. Press the messaging key on your phone and follow the prompts to initialize the mailbox with your own greeting and password.
Is it an OXO or an OXE?
how can I erase a contact that was already in the main screen in the phone?
Does the process described at 8:35 in this video work to erase the key you'd like removed? Let me know if that doesn't work.
@@ICONVoiceNetworks This didnt work for my phone. It only let me modify the label not the number
How can 8 remove the (do not desturb)
I responded above, but in case someone else sees this comment first, could you try to disable DND through the forwarding menu? You can access the forwarding menu with the key at the top right of the screen. This video walks through canceling the forward feature at the 14:36 mark, this may be how your phone was set to DND.
how do i configure the phone
How to deactivate auto answer on calls?
Auto-answer is enabled/disabled with the mute key. When the station is idle (no active call) press the mute key. The blue LED above the mute key will light-up, indicating auto-answer is active. Press the mute key again when the station is idle to turn the LED off and deactivate auto-answer.
hI!can you show us how to transfer a call to a number a of a room hotel
This would be achieved by programming each phone's extension with the appropriate room number, but would have to be completed by your installing distributor who has access to the system database.
How do i reset alcatel-lucent 8028 to factory settings?
Hilton, are you looking to reset the station name and password for a new user, or are you looking to completely reset all of the network addressing on the phone?
@@ICONVoiceNetworks
I want to factory reset the phone
8:36 como eliminar una programa de tecla
How Do I factory reset Alcatel 8029 premium Desktop...
It's showing minikbd : v2 (qwerty)
Kindly help