The under guard you were trying should fit. The only issue is when accessing the motor and gears you need to remove the underguard so the cover can be taken off. It's really only two screws so no difficult. I have run ARs like this in the past, but recently changed my whole rear brake and underguard system.
Steve Kemble That's fair. Just a preference thing. It would personally drive me mad to have to unscrew the rear underguard just to get to the motor, so I chose not to include it in the build.
Box Stock? I don't think anybody needs a guide for that. The box stock rules we have are that, you can only use parts that are included in the kit you chose. It's pretty self-explanatory.
Great Video (I loved it. Thank you) - I have a question to ask you. I always struggle between the modification between speed and weight. I saw that you put a lot of extra bits to stabilise the car. Would stabilising the car which has a bit more weight make the car faster or without the front under bumper, the side weight and the brakes which the car has less weight? Thanks.
It's is designed for Tuned Class. Rev Tuned, Atomic Tuned, and Torque Tuned. If you really want to use more powerful motors. I suggest you use a Hyper Dash 3 or a Power Dash before jumping into an Ultra Dash. Switching to large diameter trimmed tires will be beneficial, it will give less bounce and less weight.
Sir. Will this build keep the car on track for 5 laps? How fast the speed needed for this build? And what motor should i use? I really want to build this because i dont need to cut something.
Cu Py You asked three questions. I'll answer them one by one. 1. Yes. 2. Depends on the track. 3. Depends on the track. This car was built for Tuned Class. I mentioned that in the beginning of the video. In the States Tuned Class meand Tuned Motors Only and No Cutting. If you want to race this on faster categories with more powerful motors. That is up to you.
Z3N Bluster sir thank you for your answers. This helps me a lot since I'm still new in tamiya build. And pardon me that I have some question again :). I use power dash motor which has speed 39 - 40 km/h and this build sometimes still fly out of track. Any suggestion what should I change or should i give more damper?
Use a slower motor. Like I said before, this car is designed for TUNED Motors and No Cutting. If you want a car that can handle the Power Dash. You'll need to build a Fully Modified car.
another question, if the race has no limit for the number of rollers can i add 2 more rollers in the front and put stabilizer on top? or what is your recomendation for the roller set up in front? or regardless the maxium amount that is the best option? thank you master zen, sorry for asking too many questions =p
If you're using 13-12 and 13mm rollers like in this setup. I recommend using 8mm rollers in the front. If you use 13mm rollers at the top the rollers on the bottom wont touch the walls during cornering. If you use 9mm, it will make the car much heavier.
as you say its for tune tech, but can it be used for speed tech? i also try one of your builds on an MA chasis i put on a mach dash pro 3:7:1 gear i think its slow because its stable hahaha teach and enlightened me senpai :)
Puwede sa Speedtech. Beginner setup ito. Don't expect to be competitive for the top 3 until your car is built with Body Damper and trimmed tires. Even then there's a lot of experience required to start winning.
@@Z3NBluster i know, but the video became a stop-motion video at that speed... :( Also, maybe I'm not paying attention, but why you use different design for the left and right front rollers? Sorry I just got into the hobby and I still don't understand.
This build doesn't really require any cutting. The only thing more complicated on this build is wheel piercing, but that is optional. If you watch part 1, I list the parts there so you can build your own.
You're awesome. Not all parts are available here in the Philippines. Lalo un mga tools mo. heheh. keep uploading cool vids. I hope one day maka build ng magcchampion sa race hehe.
The only time I race Box Stock here is for High Speed. Over here the rules on Box Stock is you can only use parts from within the kit of the car you're racing. So because of that, I don't race Box Stock because you have very little control.
At the end of the video, I show how much I spent in USD. You can use Google to convert from USD to PHP. Note that United States pays a premium on these parts due to import taxes.
![USAB Showcase: CANADA vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/m9Cz3xsdDgc/mqdefault.jpg)
Nice work
The under guard you were trying should fit. The only issue is when accessing the motor and gears you need to remove the underguard so the cover can be taken off. It's really only two screws so no difficult. I have run ARs like this in the past, but recently changed my whole rear brake and underguard system.
Steve Kemble That's fair. Just a preference thing. It would personally drive me mad to have to unscrew the rear underguard just to get to the motor, so I chose not to include it in the build.
Kaiju Mini4wd sir how did you deal with the gear problem. i bought a ar chassis for a pro stock and have a big noise problem at gears
@@roncabais4362 buy tuned gear bro
Z3N Bluster,
Can you make a video about Tamiya Mini 4wd Blast Arrow basic setup, please? I can't wait for it!🙋
Z3N bluster,
Can i have a favor?
Can you make a stock race guide video and best set up for a stock race
Box Stock? I don't think anybody needs a guide for that. The box stock rules we have are that, you can only use parts that are included in the kit you chose. It's pretty self-explanatory.
What other bodies could you put on this chassis? I have watched your channel for some time now and finally decided to subscribe.
Great Video (I loved it. Thank you) - I have a question to ask you. I always struggle between the modification between speed and weight. I saw that you put a lot of extra bits to stabilise the car. Would stabilising the car which has a bit more weight make the car faster or without the front under bumper, the side weight and the brakes which the car has less weight? Thanks.
Hi..amazing tutorial video very helpfull...what partcode you are using for rear mass damper?
All the part numbers are shown in the beginning of part 1.
@@Z3NBluster thanks.
Nice
Kabayan, do you have a video of this car running in a track?
Yes, look for it in my channel in the playlist, "Tamiya Mini 4WD Testing."
@@Z3NBluster salamat, kabayan!🤙🏼
hi zen, any reason why the front rollers are different for both sides?
Can you make a video build that has a budget limit? For example $100 build or $80 build..
Perhaps in the future.
Z3N Bluster, What parts should I need to Set Up Aero Avante?
The parts for this build are listed in Part 1.
Okay Z3N Bluster! I love your Chanel very much😸
zen bluster i have an aero manta ray balck edition what setup can i use
This would work.
Hi Z3N just a quick question. What type of chassis based in your experience is the most superior out of all of them
master zen i cant find your favorite HG Carbon Wide Rear Stay 95257, can i use HG Carbon Rear Stay (3mm) 95259 instead?
Sure
Hey Man. Can I just use frt instead of the hg bumpers?
Sure
will large trimmed tires and ultra dash motor suit this build?
It's is designed for Tuned Class. Rev Tuned, Atomic Tuned, and Torque Tuned. If you really want to use more powerful motors. I suggest you use a Hyper Dash 3 or a Power Dash before jumping into an Ultra Dash. Switching to large diameter trimmed tires will be beneficial, it will give less bounce and less weight.
Also if you convert to more powerful motors like the Hyper and Power. You're going to need to figure out a way to mount front brakes as well.
What motor should I use? 😌
This car is designed for Tuned Class. So it's limited to variances of the Torque Tuned, Atomic Tuned, and Rev Tuned motors.
Ooo..okayy🙌thank you very much
Zen Bluster what parts do i need to set up my avante pro x ?
Watch my MA Chassis Basic Build videos Part 1. For the rest of the assembly, watch part 2.
Where do I get the handle you were using for the 1.9mm drill bit for opening the holes?
DXNProvisions.com. I link them in the beginning of every new video now.
Z3N Bluster I’ve gone to the links, looked at the tools, and can’t find the tool you’re using at 2:27. Is that called a pin awl? Or something?
It's a hand drill. Look for it in the tools section. Arrowmax Tool Set or Exclusive Tool Set.
Hand drill...ok. The one in your video is different from the one on the website. Thank you for the info. I ordered a set. I enjoy your videos.
Sir. Will this build keep the car on track for 5 laps? How fast the speed needed for this build? And what motor should i use? I really want to build this because i dont need to cut something.
Cu Py You asked three questions. I'll answer them one by one. 1. Yes. 2. Depends on the track. 3. Depends on the track. This car was built for Tuned Class. I mentioned that in the beginning of the video. In the States Tuned Class meand Tuned Motors Only and No Cutting. If you want to race this on faster categories with more powerful motors. That is up to you.
Z3N Bluster sir thank you for your answers. This helps me a lot since I'm still new in tamiya build. And pardon me that I have some question again :). I use power dash motor which has speed 39 - 40 km/h and this build sometimes still fly out of track. Any suggestion what should I change or should i give more damper?
Use a slower motor. Like I said before, this car is designed for TUNED Motors and No Cutting. If you want a car that can handle the Power Dash. You'll need to build a Fully Modified car.
another question, if the race has no limit for the number of rollers can i add 2 more rollers in the front and put stabilizer on top? or what is your recomendation for the roller set up in front? or regardless the maxium amount that is the best option? thank you master zen, sorry for asking too many questions =p
If you're using 13-12 and 13mm rollers like in this setup. I recommend using 8mm rollers in the front. If you use 13mm rollers at the top the rollers on the bottom wont touch the walls during cornering. If you use 9mm, it will make the car much heavier.
How many aero avante do you have Zen bluster
As a kit collection? I don't know, I haven't counted.
Part 2
Hi Z3N, for piercing screw holes, does 2mm work?
Drilling new holes? On what? The chassis? Carbon? FRP?
@@Z3NBluster piercing screw holes papa Z3N.
z3n Bluster sir painclude naman ng mga ginamit mong items salamat
Look for AR Chassis Basic Build Part 1...
What motor did you use in this build?
The answer to your question is in Part 1 and Part 2.
idol, applicable dn kaya yan for super XX chassis?
ano po ma sa suggest nyo basic set up for super XX chassis?
as you say its for tune tech, but can it be used for speed tech? i also try one of your builds on an MA chasis i put on a mach dash pro 3:7:1 gear i think its slow because its stable hahaha teach and enlightened me senpai :)
It is not designed for that. You'll have to make changes to the setup like using front brakes.
Test run this bad boy, please.
I did already, look for the video on my channel AR vs MA vs FM-A Speed Tech.
Thank you.
Ano po ang purpose ng magkaiba ang front rollers sa left and right? Newbie here, thank you in advance 😊
The roller in the right is for the lanechange lane. It helps bite harder, preventing it from flying off.
sir pano ba masasabing speedtech, ganyan ba yung setup,
Puwede sa Speedtech. Beginner setup ito. Don't expect to be competitive for the top 3 until your car is built with Body Damper and trimmed tires. Even then there's a lot of experience required to start winning.
Please don't fast forward through the assembly process because that's the part where I'm most confused....
Did you know that you can play TH-cam videos at 25% speed?
@@Z3NBluster i know, but the video became a stop-motion video at that speed... :(
Also, maybe I'm not paying attention, but why you use different design for the left and right front rollers? Sorry I just got into the hobby and I still don't understand.
Front bumper have 1mm?
+Raymond lam148 I don't understand the question.
Z3N Bluster the front under guard have 1mm?
Para san po yung underguard sir? Newbie lang po thanks
Prevents your rollers from catching and helps your brakes become.more effective.
Bakit nyo po linalagay yung mga rollers sa oil?
It's not oil, that is lighter fluid. It degreases the rollers. It helps free them up to spin for longer periods of time.
Can you build me one of those? Hehe.
This build doesn't really require any cutting. The only thing more complicated on this build is wheel piercing, but that is optional. If you watch part 1, I list the parts there so you can build your own.
You're awesome. Not all parts are available here in the Philippines. Lalo un mga tools mo. heheh. keep uploading cool vids. I hope one day maka build ng magcchampion sa race hehe.
What counts as normal nuts, IYKWIM?
IYKWIM??? What?
Hey man, really useful stuff. I just have question.
Why did you only put 1 stabilizer in the front bumper? what would it do or how would that work?
nerbs The brakeset part used on the Double Aluminum Roller also acts as a stabilizer.
Z3N Bluster ahh that makes sense then. Have you done a video for stock builds and just tips and improvements on the transmissions and stuff. Thanks!
The only time I race Box Stock here is for High Speed. Over here the rules on Box Stock is you can only use parts from within the kit of the car you're racing. So because of that, I don't race Box Stock because you have very little control.
Z3N Bluster ah that would make sense. Thanks man really a great fan of your work.
Any chance we'll see an advanced build for racing?
Anong kulay po nung cowl
Cowl? Do you mean Body? The paint is two layers of Tamiya PS paint Translucent Purple and two layers of PS paint Anodized Aluminum underneath it.
NORMAL NUTS? That's an oxymoron! 😂😂😂
Idol freebies plss??
Freebie? This video is already free information.
para saan po yung underguard
It helps for braking when the car jumps over slopes.
It protects the wheels as well to get stuck when jumping unstable
Magkano po nagastos nyo dyan in php
At the end of the video, I show how much I spent in USD. You can use Google to convert from USD to PHP. Note that United States pays a premium on these parts due to import taxes.
Z3N bluster are you a Filipino ?
Yes