It's more than likely that global windows doesn't work on the rear because there's no auto up/down function in the rear, which would require a module. The DDM and PDM only pertain to the front doors. Best part of forscan is turning off the warning chimes. I disabled the key in ignition, door open, and start up chimes which in itself makes it worth paying for the extended license. Technically speaking, Bambi mode would fail Pennsylvania State inspection, but it's probably not something I would fail. I like the Alpharex headlights on that truck. Thinking about getting the Nova Midnight Black series for my F150. Pricey, but damn those things look sharp.
This whole truck worries me for when we make it back to PA lol those midnight series definitely look nice!! Kind of wish I would've waited n got those!
@@WICKEDAUTO1 You need to find a certified inspection mechanic like me who specializes in "Helen Keller" inspections. LoL. Yeah, those midnight series really look sharp. My truck has the same paint/decals as yours. I think that would really make the midnight black headlights pop.
I did not understand the subwoofer amp install through forscan. Is there a setting and what does it do? I set up my subwoofer with a line driver (LC1i) and picked up the OEM subwoofer for the kine in and the remote sense.
I just bought the luxx series, and I cannot figure out how to adjust these things. My passenger side is shooting up a little, and clearly need to bring it down. All I’m seeing is a crown looking “bolt” where the adjustment hole is. I can’t get anything in there to turn it. It’s facing towards the front of the truck.. I’ve emailed AlphaRex to no avail..
On mine it was clockwise on both sides, had to bring them down 12" Phillips screw driver now I have to bring the high beams down at least a foot or more Hikari Ultra H7 leds in both high and low.
I didn’t have any space behind it to fit a wrench in and I tried using a flat head screw driver and it took forever but then I used a Philips head in the same spot and it worked so much faster and saved me a lot of time... those sharp teeth I wouldn’t figure u can use a Philips head but yeah
Hey question I have a 2020 F150 lariat 5.0 but it doesn’t have the plow package now I know that the plow package essentially is just that button that the activates power to like heated seats and stuff is there a way through the forescan To add the button and make it possible to have the plow availability at a regular 5.0 without the plow package thanks so much I would appreciate your response
Nice video,what alpharex headlights did you buy? also did you notice those headlights being too dim? I'm curious to see if you recommend any headlight bulbs
That makes sense but doesnt explain the guy that had all 4 do it as he said through forscan and nothing about swapping switches in the rear for auto up/ down
You can buy the obd plug on amazon and then it's just downloading forscan on your computer and getting the license(free). I'll put the link for the obd reader and the forscan video i did on it in the description
When I had them on my ram I never had a issue at all, on this f150 only the passenger side has the issue for some reason. I plan on getting some 3m tape and see if that will work to hold the guard tight against the outside seal
I had this issue, at first on my 2018 F-150, and I hate to admit it but I put them on wrong. I did not tuck the plastic piece in the back behind the black trim piece, I did by the mirror though and I had all kinds of issues. I used this video and it helped me out. I am not sure it will help you, but I thought I would share. FF to 1:19 mark in the video... th-cam.com/video/cPYB_i6HwNA/w-d-xo.html
It is, I had actually done it with my 18. However to do it that way you turn off the battery management system. What that does I have no idea but with this being new and no issues I didnt want to mess with it.
I just installed the alpharex headlights and added led bulbs. It has since thrown a bunch of codes that I cleared then came right back. Can I use forscan to accept the led headlight bulbs?
I know you can use it to remove the fast flicker from your tuck thinking they're out but I'm not sure if you can do what your asking. May have to get resistors.
Just recently downloaded forscan to my laptop to make some changes but not all options are available to configure as are on the spreadsheet. Would it be the forscan app itself maybe? Example: BCM, IPC, PDM, DDM
tony e it could be your scan tool. There are two modes for the bus. On another of his videos he shows what scanner he has and toggling the switch is needed to read all of the bus. th-cam.com/video/VeDZPgYjUdY/w-d-xo.html
@@garner3384 what he said^^. Thank you, Daniel! It is the hs and ms switch. The main components...bcm being one is under hs, others are under ms..apim being one of them.
What ended up happening was.... I changed the correct code and all but I guess I was putting “write” on the line pertaining to the code, and it wasn’t until I hit “write all” at the bottom of the screen that it took effect and worked properly
Another question from me...I did away with the seat belt chime, the doo doo doo chime when you crank... But I still have the chime when I first get in the truck and insert the key. Is that the Key Warning Chime thing you mentioned? If so can you give me a how to? I can not open Google documents at work and I do not remember seeing how to do away with that annoying chime when you put the key in the ignition before you crank it.Thank you as always!!
@@WICKEDAUTO1 I assume you mean police mode in fourscan?. I havent downloaded that yet to use it. The settings in the screen has a night mode...changes the blue to black
@@WICKEDAUTO1 great videos though and clean truck. I bought a pair of black Anzos but had issues with them and sent them back. I'm thinking about pulling the trigger on these
@@1nkr3dibl3 thank you!! If your after a set of headlights I would recommend these. They are priced great, look great and I have yet to have any issue what so ever with them.
WickedF150 man I got the alpharex pro series and I have the standerd halogens in them I have a 4” suspension lift on it I have no idea if I need to adjust I have not been brighter from anybody as of yet just not sure if I should go with LEDs do to blinding other drivers out
@@bradgourley2286 I'm surprised you havent been high beamed yet! Lol I would definitely swap to LEDs for output and looks just make sure you adjust the headlights then. Super simple as you see in the video. Could you message or post to the fb page as I'd really like to see your setup with the 4in. facebook.com/WickedF150-109302690410438/
@@bradgourley2286 no I did not take a video of that but i did have one adjusting the stock housings after the level and it's the same concept. When I adjusted the Alpharex the passenger was probably 8in high and driver was about 4in low. I like an even linr across...them setup that way is supposed to help on coming traffic/shoulder visibility but I think it is perfect being straight across
How did you adjust the high beam?
It's more than likely that global windows doesn't work on the rear because there's no auto up/down function in the rear, which would require a module. The DDM and PDM only pertain to the front doors. Best part of forscan is turning off the warning chimes. I disabled the key in ignition, door open, and start up chimes which in itself makes it worth paying for the extended license. Technically speaking, Bambi mode would fail Pennsylvania State inspection, but it's probably not something I would fail. I like the Alpharex headlights on that truck. Thinking about getting the Nova Midnight Black series for my F150. Pricey, but damn those things look sharp.
This whole truck worries me for when we make it back to PA lol those midnight series definitely look nice!! Kind of wish I would've waited n got those!
@@WICKEDAUTO1 You need to find a certified inspection mechanic like me who specializes in "Helen Keller" inspections. LoL. Yeah, those midnight series really look sharp. My truck has the same paint/decals as yours. I think that would really make the midnight black headlights pop.
I did not understand the subwoofer amp install through forscan. Is there a setting and what does it do? I set up my subwoofer with a line driver (LC1i) and picked up the OEM subwoofer for the kine in and the remote sense.
I just bought the luxx series, and I cannot figure out how to adjust these things. My passenger side is shooting up a little, and clearly need to bring it down. All I’m seeing is a crown looking “bolt” where the adjustment hole is. I can’t get anything in there to turn it. It’s facing towards the front of the truck.. I’ve emailed AlphaRex to no avail..
On mine it was clockwise on both sides, had to bring them down 12" Phillips screw driver now I have to bring the high beams down at least a foot or more Hikari Ultra H7 leds in both high and low.
I didn’t have any space behind it to fit a wrench in and I tried using a flat head screw driver and it took forever but then I used a Philips head in the same spot and it worked so much faster and saved me a lot of time... those sharp teeth I wouldn’t figure u can use a Philips head but yeah
Hey bro
Nice truck 👍👍
is this oxford white or space white ?
Hey question I have a 2020 F150 lariat 5.0 but it doesn’t have the plow package now I know that the plow package essentially is just that button that the activates power to like heated seats and stuff is there a way through the forescan To add the button and make it possible to have the plow availability at a regular 5.0 without the plow package thanks so much I would appreciate your response
Nice video,what alpharex headlights did you buy? also did you notice those headlights being too dim? I'm curious to see if you recommend any headlight bulbs
Just an FYI if you’re towing a trailer or heavy load in tow mode your Hill dissent automatically works there is no need to push a button.
The rear windows have to have one touch up/down option like the fronts for global to work on them
Have you tried any other obd? www.amazon.com/dp/B01N18TOFB Since I'm new to this can you tell a major difference between them
Thanks man, very helpful video! Short and to the point! Much needed on youtube lol!
Very informative video man! Love it.
THE FRONT WINDOWS ARE AUTO UP/DOWN THE REAR ARE NOT THATS WHY THE OPEN WINDOWS DOESNT WORK ON THE REAR.
That makes sense but doesnt explain the guy that had all 4 do it as he said through forscan and nothing about swapping switches in the rear for auto up/ down
@@WICKEDAUTO1 HE ALSO HAD A MORE LUX VERSION LIKE A LARIAT SO THE REAR MIGHT OF CAME WITH AUTO UP/DOWN IN THE UPPER MODELS
@@NordicViking88 that may actually be the case I cannot remember what trim it was it was so long ago I watched it.
Where is the best place to get forscan?
You can buy the obd plug on amazon and then it's just downloading forscan on your computer and getting the license(free). I'll put the link for the obd reader and the forscan video i did on it in the description
How did you get the in channel vent guards to work with the bounce back on the front windows.
When I had them on my ram I never had a issue at all, on this f150 only the passenger side has the issue for some reason. I plan on getting some 3m tape and see if that will work to hold the guard tight against the outside seal
I had this issue, at first on my 2018 F-150, and I hate to admit it but I put them on wrong. I did not tuck the plastic piece in the back behind the black trim piece, I did by the mirror though and I had all kinds of issues. I used this video and it helped me out. I am not sure it will help you, but I thought I would share. FF to 1:19 mark in the video... th-cam.com/video/cPYB_i6HwNA/w-d-xo.html
Thank you gentlemen. I'll give it a try.
Is the Auto Start/Stop a change available in the Forscan?
It is, I had actually done it with my 18. However to do it that way you turn off the battery management system. What that does I have no idea but with this being new and no issues I didnt want to mess with it.
I just installed the alpharex headlights and added led bulbs. It has since thrown a bunch of codes that I cleared then came right back. Can I use forscan to accept the led headlight bulbs?
I know you can use it to remove the fast flicker from your tuck thinking they're out but I'm not sure if you can do what your asking. May have to get resistors.
What fuse you tap into? I have a 19 3.5 eb and had check engine ac stopped working and turbos also
Just recently downloaded forscan to my laptop to make some changes but not all options are available to configure as are on the spreadsheet. Would it be the forscan app itself maybe? Example: BCM, IPC, PDM, DDM
tony e it could be your scan tool. There are two modes for the bus. On another of his videos he shows what scanner he has and toggling the switch is needed to read all of the bus.
th-cam.com/video/VeDZPgYjUdY/w-d-xo.html
@@garner3384 what he said^^. Thank you, Daniel! It is the hs and ms switch. The main components...bcm being one is under hs, others are under ms..apim being one of them.
Daniel Garner I appreciate the help!
WickedF150 thanks for the help as well
Nav in motion location/ code? I tried from ricardos workshop but it did not work (2016 sync3)
It's in the forscan spreadsheet, not sure of where as I havent used it in 6months but it's in there.
WickedF150 yes sir, I’ll have to look again
What ended up happening was.... I changed the correct code and all but I guess I was putting “write” on the line pertaining to the code, and it wasn’t until I hit “write all” at the bottom of the screen that it took effect and worked properly
Is that a 20 inch wheel on your truck? And if so what is the actual tire size?
No they are 18s, tires are 295/70
Another question from me...I did away with the seat belt chime, the doo doo doo chime when you crank... But I still have the chime when I first get in the truck and insert the key. Is that the Key Warning Chime thing you mentioned? If so can you give me a how to? I can not open Google documents at work and I do not remember seeing how to do away with that annoying chime when you put the key in the ignition before you crank it.Thank you as always!!
That was my issue, i wanted to remove that as well but it only removed the door open chime
WickedF150 I figured it out yesterday and I’m good now. Yay!!!
@@wwldman well tell me how you did it! Lol
WickedF150 how do I send you pics? I have the fix.
I have no chimes with key in, doors open, seat belt, etc. Not for everyone but I’m loving it so far!
Are those the nova or pro and are they black or jet black?
They are the pro series and black.
Do you have a link for the hill descent button?
No, as mine came installed however you can find them anywhere...amazon, ebay, tasca.
How can I message you I have a few questions to ask you?
facebook.com/WickedF150-109302690410438/
I just changed my screen to night mode...its black all the time
The police mode.... yes, it turns everything off. If you don't like it just change it back no biggy
@@WICKEDAUTO1 I assume you mean police mode in fourscan?. I havent downloaded that yet to use it. The settings in the screen has a night mode...changes the blue to black
@@robain79 yes, which basically turns off all your lights including screen
@@WICKEDAUTO1 really?... cause my screen stays on...its just not the blue theme
@@WICKEDAUTO1 I want one of those radios you installed...its sweet
Dude just use a Phillips screw driver to adjust the headlights. It fits perfect in that slot
Pretty sure I said you could just so that in the video. Wish I wouldve noticed it before hand for myself though! Lol
@@WICKEDAUTO1 great videos though and clean truck. I bought a pair of black Anzos but had issues with them and sent them back. I'm thinking about pulling the trigger on these
@@1nkr3dibl3 thank you!! If your after a set of headlights I would recommend these. They are priced great, look great and I have yet to have any issue what so ever with them.
Do you still have the H7 LEDs in these
I do. I will always have them but I may switch brands at some point to see how they perform
WickedF150 man I got the alpharex pro series and I have the standerd halogens in them I have a 4” suspension lift on it I have no idea if I need to adjust I have not been brighter from anybody as of yet just not sure if I should go with LEDs do to blinding other drivers out
You showed where to adjust them do you have a video of you actually adjusting the alpharex? Before and after
@@bradgourley2286 I'm surprised you havent been high beamed yet! Lol I would definitely swap to LEDs for output and looks just make sure you adjust the headlights then. Super simple as you see in the video.
Could you message or post to the fb page as I'd really like to see your setup with the 4in.
facebook.com/WickedF150-109302690410438/
@@bradgourley2286 no I did not take a video of that but i did have one adjusting the stock housings after the level and it's the same concept. When I adjusted the Alpharex the passenger was probably 8in high and driver was about 4in low. I like an even linr across...them setup that way is supposed to help on coming traffic/shoulder visibility but I think it is perfect being straight across
How high did you aim them?
4ft high at 25ft. That is where they are supposed to be