What a great video. Rather than having a hand-held cell phone recording the video, you've got a camera that lets you use both hands!!! Imagine! Next, you keep your workspace organized and clean. Great help. The instructions you give are concise and correct. The only thing that hung me up was making sure the key was extended when replacing the spring and retainer assembly. All in all, one of the best how-to videos I've seen. Thanks a lot!
Video wasnt applicable to me because i need to replace a lost key, but i must applaud your video for being so neat, orderly and well shot. Hard to find videos like this . good job
This is a good video. I was able to fix my Acura key. One thing: Inside the head of the key itself is a removable metal part that has a cam stop. This can get worn too, and causes the key to be loose. You can use the metal cam insert from the blank replacement key and it totally fits.
you save me almost $300 for a new key fob from the dealership! I found replacements fobs on amazon for bout $30, and with yur video it’s a steal!!!! Very much appreciated for the detailed content you have made for this subject!!! Keep up the good work 🤙🏽
Youre the man!!!!! Thank you!!! Acura charging me $90 to "reprogram" the aftermarket key..all I gotta do is switch the motherboard right?? So why in the hell Acura tryin to charge to "reprogram"..🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️ Thanx again for the video!!!
This is very details and excellent video for switching the old to the new key fob. but I am concern a bit dark (maybe my eyes are not very clearly) Thank you for the instruction
Thanks I had to pry and break the old key fob because the old screws near the key were seized and stripped. After I did that the replacement went well.
Question, my original key ripped off and I just ordered the eBay key fob. So in my case all I have to do is make the new key and then just take apart the bottom half of the remote, remove the chip and and place it in the new one?
What of I just make a duplicate key on the new blank one and switch the internal electronic parts to the new one? Will it start the car or do I need to reprogram it?
@@AngeChavo what about if I cut the blank key and copy it from my original key? That way I just switch the mother board into the new one instead of opening up the spring mechanism.
What a great video. Rather than having a hand-held cell phone recording the video, you've got a camera that lets you use both hands!!! Imagine! Next, you keep your workspace organized and clean. Great help. The instructions you give are concise and correct. The only thing that hung me up was making sure the key was extended when replacing the spring and retainer assembly. All in all, one of the best how-to videos I've seen. Thanks a lot!
Video wasnt applicable to me because i need to replace a lost key, but i must applaud your video for being so neat, orderly and well shot. Hard to find videos like this . good job
This is a good video. I was able to fix my Acura key. One thing: Inside the head of the key itself is a removable metal part that has a cam stop. This can get worn too, and causes the key to be loose. You can use the metal cam insert from the blank replacement key and it totally fits.
All these years later, thanks for the video. Just repaired my key that snapped off the keychain portion.
you save me almost $300 for a new key fob from the dealership! I found replacements fobs on amazon for bout $30, and with yur video it’s a steal!!!! Very much appreciated for the detailed content you have made for this subject!!! Keep up the good work 🤙🏽
Yes
Very good. I saved $560 by watching this video.
Thanks alot! Really helped me in a time of losing my mind. Finally got it to sit and open properly
Worked like a charm! I appreciate you posting. Thank you.
Youre the man!!!!! Thank you!!! Acura charging me $90 to "reprogram" the aftermarket key..all I gotta do is switch the motherboard right?? So why in the hell Acura tryin to charge to "reprogram"..🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️ Thanx again for the video!!!
They are actually going to program the new key, but the thing is that it actually takes 5 min to do it.
Thank you so much! You saved me over $100 dollars and it only took my brother and I thirty minutes to clean and replace the parts. You're the best!
Just ordered new housing. Saved your video for later. 🙏🏻
Great video man....got to replace mine and didn't want to spend $200+. Thanks so much.
Great Video and directions! I was able to replace my Acura key fob without any issues.
Excellent video bro just ordered mine and will be following you tutorial for the key transplant.
This is very helpful. Exactly what I am looking for.
This is very details and excellent video for switching the old to the new key fob. but I am concern a bit dark (maybe my eyes are not very clearly) Thank you for the instruction
Thanks I had to pry and break the old
key fob because the old screws near the key were seized and stripped. After I did that the replacement went well.
Exactly what I needed... Thank you!!
I will try this. Excellent instructional video.
Thank you!
Thank you! Take your time and stay organized. Works just as described.
Thank you Sir!...you save my time to figure out...
Thanks for this detailed job you are the man!!!
This video was such a great help to me. Thanks a lot
Thanks for explaining this so clearly - great job.
This was extremely helpful. Thank you.
This is what I needed!!!!! Thank you!
Where is the transponder chip located? My key broke off the plastic.
Thanks very detailed procedures 🙏
Excellent video thank you in 2022!
Question, my original key ripped off and I just ordered the eBay key fob. So in my case all I have to do is make the new key and then just take apart the bottom half of the remote, remove the chip and and place it in the new one?
Can combine the back cover of the OEM key with the Acura logo, and fit it to the new ebay key? im guessing it should fit right in.
Super helpful!! Thank you!!
Game changer 🎉 thank you!!!!!!!!!!!!!!!!
What happens if you do same process but you dont use OEM motherboard. Can you make IT work?
Hey guys! Does anyone know what screwdriver you or he used for 5:55? Thank you guys and please help me out!
Thank u .that was big help
So helpful. Thank you!
You should show us when you crank troue car with the switched key
What of I just make a duplicate key on the new blank one and switch the internal electronic parts to the new one? Will it start the car or do I need to reprogram it?
That should work fine, I would think
Great Video 👏🏽👏🏽👏🏽
Thanks dude !! awesome video !!!
Hey do you still have to get the key programmed?
Shekh A Islam no because you took the mother board out that’s programmed
What batteries does the key use
@@AngeChavo what about if I cut the blank key and copy it from my original key? That way I just switch the mother board into the new one instead of opening up the spring mechanism.
@@danram247 guess he wanted to keep OEM key
?!?
great job man
Can’t get the damn second screw off the eBay key it turns but doesn’t come out wtf
Thank video 👍
perfection
240$ from dealer.... wow
Thank you
good
You did not say anything about the ship
Thank you