Source Code: create.arduino.cc/editor/mertarduinotech/8a4effdb-9adf-4f5f-8c86-5f8b7c9f5b6a/preview Recommended Items: Use Your Muscles in Project - amzn.to/3wdL45C 37 Sensor & Module Packages - amzn.to/3m66WeQ Try this Robot Arm - amzn.to/3fq8DCl Best Resin 3D Printer - amzn.to/39tY8KB Arduino Compatible Kits - bit.ly/2J2AFF7 Banggood Spring Sale - bit.ly/3slMbOn
Nice project mert arduino. Your all robotic projects are too good.Great going. I am loving this arduino stuff from your videos and will be working on it soon.
mert arduino i have followed your videos ever since i was a rookie in arduino thanks for sharing the codes genuinely keep up the good work and good luck for your future projects
Mert Arduino Tutorial & Projects can you also include a tutorial on how unbalanceness causes the servo motor to sweep either 45 degrees left or right? rather than the servo motor sweeping at a wide range of angle, i prefer it to be a step sweep.
I have HM10 Bluetooth Module. I want to make this project but Remote XY did not Work with HM10 Bluetooth Module. I use Serial Bluetooth Terminal but It not has features send data from mobile Gyroscope. I try to find App is Capable to Send data from Smartphone Gyroscope. I find many app but all are not support BLE device or Not Capable to Connect HM10 Bluetooth Module. How I make it if I have Android Smartphone.
you must add a voltage divider with arduino tx pin and hc05 rx pin, sice arduino sends 5v but bt module accepts 3.3v, it might work fine at startup but it may get damaged after a period of usage
Hello, I wired everything correctly , I also uploaded the code with no problems, but the when I open the app and I try to pair it with the hc-06 it fails to connect and gives me this message "Device not reply. Receive time error."I know my hc-06 works because I did the voice control car with the other app and it works fine. Please help me. THanks
I had similar project, but with wireless transmitter. It would be cool to have in the code also an autonomous mode with the help of ultrasonic sensor. Maybe you could try to do that..
Good day @Mert Arduino and Tech! Hello buddy I found your work very impressive and I just want to ask you something, Is it possible to make this one but in a form of Bluetooth controlled Arduino Robot Boat instead of using wheels that is maneuvered with a dc-motor I rather change it as propeller so that it will be suitable to become a Arduini Robot Boat? I hope you will answer my question ;)
I am 5th year Electronics and Communications Engineering and me and my colleagues wants to innovate your work but I want to verify it first if is it possible to modify it into a boat rather than a car. If you have time you can email me thru this account (baflorjoevelle@gmail.com) I would be glad if you can help us with this one, THIS WILL BE FEATURED as our FINAL YEAR PROJECT in ENGINEERING
hi i have some problem in this project . all circuit and programs are good but my mobile remoteXY app can't connect with the bluetooth module (hc-05) .what is the problem?.anyone known ... pls help me.......
mani mail upgrade the battery for l293d or check tx rx connection try few times if not try to change the bluetooth module it is temporary issue once fixed will not be repeated any more
tx is connect to pin 2, and rx is connect to pin 3. and which type of battery can be used, can you pls tell me the voltage levels and more inform about battery.more peoples are say the same to replace battery . but i have detail about battery
Bro I can't make arduino code, I made it after watching your video and started it with your arduino code, but I don't like your remote design, so after watching your video, I designed the remote but it doesn't work with that program, if I give you my program, you can do the work for me. Can you do it?
I downloaded REMOTE XY on my phone but I am not able to see the console buttons on the phone as in your video (movement buttons).I have downloaded the code also.please he me as soon as possible.i have to show this in my project
Sir,great work!Thanks.I wonder how can I modify this code like not only control according to the scope but also simply follow the phone while control option is not activated?
Thanks Mert, it is great project and works almost perfectly! Button ON/OFF is not working, always is ON. Can you modify code to switch joystick off and stop motors? I would be very grateful. Actually, I will use this project to navigate wireless lawn mover. It will run motors over relays.
I've inputted the code, then the connection was okey, but regarding to connectivity ofmy bluetooth modeule and remotexy .. " Device not reply. RECEIVE TIME OUT"..
Yep! Even I want to do this, it's like a two in one, it's an autonomous obstacle avoider then you flip a switch and it becomes remote controlled via your phone. Any idea how should I go about doing this?
hello i made this project everything works but when i slide the joystick front the car moves left and when i slide the joystick left the car moves front could u help me figure out the problem?
Hey nice project however when trying to connect the module to the app I receive this error, "Device not reply. Receive time out error" is there any way to fix this? Thanks in advanced.
merhaba her zaman ki gibi güzel bir video olmuş. APK dosyasını göremedim kendimiz mi oluşturacağız. yoksa hazır dosya mı kullanacağız. Çalışmalarını merakla bekliyoruz. Kolay Gelsin...
In love with thid channel , Thnax a lot M getting "Device not reply .Receive time out error " i have reconnected many times , still facing same problem
Mert Arduino and Tech YOU ARE GREAT CAN YOU HELP ME WITH THIS QUERY THAT I WANT TO USE ALL 4 MOTORS IN MOTOR DRIVER WITH 2 SERVOS ALSO SO I NEED MUCH POWER SO CAN I USE 12 VOLT RECHARGEABLE BATTERY THAT BIG AND HEAVY ONE (ONE INSIDE THE UPS). PLEASE REPLY!!!!
Mert, I am getting an error message avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xa9 please help me
Source Code: create.arduino.cc/editor/mertarduinotech/8a4effdb-9adf-4f5f-8c86-5f8b7c9f5b6a/preview
Recommended Items:
Use Your Muscles in Project - amzn.to/3wdL45C
37 Sensor & Module Packages - amzn.to/3m66WeQ
Try this Robot Arm - amzn.to/3fq8DCl
Best Resin 3D Printer - amzn.to/39tY8KB
Arduino Compatible Kits - bit.ly/2J2AFF7
Banggood Spring Sale - bit.ly/3slMbOn
Nice project mert arduino. Your all robotic projects are too good.Great going. I am loving this arduino stuff from your videos and will be working on it soon.
mert arduino
i have followed your videos ever since i was a rookie in arduino
thanks for sharing the codes genuinely
keep up the good work
and good luck for your future projects
kanalını yeni keşfettim. Tatlı arduino projeleri ele almışsın. başarılar dilerim.
My best favorite channel 😍
could you please do a self balancing robot video , nice video and it works !!!
I have a doubt ? how turning the bot to a side works in the code ?
Awesome video, do You plan on making a Maze Solving Line Following Robot anytime soon?
Okay, thank You!
Hello. Do you suggest using this platform for control from mobile phone or MIT App Inventor ?
I think you are the best by far. Are you able to show how to control servo motor using phone's accelerometer?
Mert Arduino Tutorial & Projects can you also include a tutorial on how unbalanceness causes the servo motor to sweep either 45 degrees left or right? rather than the servo motor sweeping at a wide range of angle, i prefer it to be a step sweep.
Excellent job ! Can u provide a tutorial based on GSM and GPS together ?
This one really great,,
Make more robot car,,
It's simple to follow with remote xy web editor,,
great source for making apk..
Thanks
I like ur vids a lot
I have tried all of them except ink plotter
Did this project work for you
Love your channel fun and easy arduino projects!
Very nice video. Everything is made very clear . Thank You...
sorumu geri aldım .videoda herşey çok güzel anlatılmış. Tam izlemeden yorum yazmamak lazım ;)
thank you, i wanna ask why define right motor control is 8 and 9?
plz make a buletooth control 240v plug with fill description and all i will be thank full
and this is awecome great work keep it up :)
"device not reply. Receive time out error"
is showing on my smartphone app
please help me out....
your videos are amazing....can you do one on a quadrotor. Try to use rf modules
looking forward to it
Yo did you delete your very first tutorial? the Bluetooth robot one?
I have HM10 Bluetooth Module. I want to make this project but Remote XY did not Work with HM10 Bluetooth Module. I use Serial Bluetooth Terminal but It not has features send data from mobile Gyroscope. I try to find App is Capable to Send data from Smartphone Gyroscope. I find many app but all are not support BLE device or Not Capable to Connect HM10 Bluetooth Module. How I make it if I have Android Smartphone.
Can I use the same code if I'm using the BTS7960 controllers?
you must add a voltage divider with arduino tx pin and hc05 rx pin, sice arduino sends 5v but bt module accepts 3.3v, it might work fine at startup but it may get damaged after a period of usage
Good job my friend where are you from?
he is Loser, it is difficult to say Turkey.:)
Hello, I wired everything correctly , I also uploaded the code with no problems, but the when I open the app and I try to pair it with the hc-06 it fails to connect and gives me this message "Device not reply. Receive time error."I know my hc-06 works because I did the voice control car with the other app and it works fine. Please help me. THanks
Aga bu videodaki uygulamayı yapmak için illa android uygulamanın tam sürümünü mü satın almamız gerekiyor ?
can u tell me what is that pwr jmp pin on the shield
Which online software is used to do this
Can this project work with an iPhone as well?
which app you use to make the connections?
Genial ¡¡¡
When a project with nodeMCU??? I think it cuold be more interesting to work with WiFi instead Bluetooth. ;)
I had similar project, but with wireless transmitter. It would be cool to have in the code also an autonomous mode with the help of ultrasonic sensor. Maybe you could try to do that..
where dowe find ultrasonic sensor or bluetooth modue in fritzing??
Can I use Nano or Pro instead of Uno?
about the remoteXY app, is it free or i have to pay to be able to use that app?
super bro .thanks for clearing my doubts that how to create an app for Arduino applications
Can we use aduino nano instead of aduino UNO?
kitna volt ki or kitne rpm ki motor lagega
Is banggood a trust worthy site and will they deliver in India. Also how do i use L298N instead?
i'm using 1-3V dc motors and if i write 120 or less on analogWrite i must give a little help with my hand to start spinning....any suggest?
bro can u add obstacle sensor to the same project....?if so can u make a video.
APOLOGIZE THE ARDUINO IDE IS THE SAME AS NORMAL OR DIFFERENT ARDUINO IS THAT I CONFUSED BECAUSE TO ME I APPEAR IN BLANCO AND TO YOU IN BLACK WHY?
Good day @Mert Arduino and Tech! Hello buddy I found your work very impressive and I just want to ask you something, Is it possible to make this one but in a form of Bluetooth controlled Arduino Robot Boat instead of using wheels that is maneuvered with a dc-motor I rather change it as propeller so that it will be suitable to become a Arduini Robot Boat? I hope you will answer my question ;)
I am 5th year Electronics and Communications Engineering and me and my colleagues wants to innovate your work but I want to verify it first if is it possible to modify it into a boat rather than a car.
If you have time you can email me thru this account (baflorjoevelle@gmail.com) I would be glad if you can help us with this one, THIS WILL BE FEATURED as our FINAL YEAR PROJECT in ENGINEERING
Can we use l293d motor shield
Any problem in making this car i can help u
hi i have some problem in this project . all circuit and programs are good but my mobile remoteXY app can't connect with the bluetooth module (hc-05) .what is the problem?.anyone known ... pls help me.......
mani mail upgrade the battery for l293d or check tx rx connection try few times if not try to change the bluetooth module it is temporary issue once fixed will not be repeated any more
tx is connect to pin 2, and rx is connect to pin 3. and which type of battery can be used, can you pls tell me the voltage levels and more inform about battery.more peoples are say the same to replace battery . but i have detail about battery
Ye tx and rx connections are right use 9v duracell battery
The app says connection timeout
Bro I can't make arduino code, I made it after watching your video and started it with your arduino code, but I don't like your remote design, so after watching your video, I designed the remote but it doesn't work with that program, if I give you my program, you can do the work for me. Can you do it?
hey dude can you show us how to make this robot using a adafruit motor shield
Ok, No Problem :)
I downloaded REMOTE XY on my phone but I am not able to see the console buttons on the phone as in your video (movement buttons).I have downloaded the code also.please he me as soon as possible.i have to show this in my project
Sir,great work!Thanks.I wonder how can I modify this code like not only control according to the scope but also simply follow the phone while control option is not activated?
Can i use Motor Drive Shield Expansion Board L293D for Arduino Duemilanove UNO Mega R3
Thanks Mert, it is great project and works almost perfectly!
Button ON/OFF is not working, always is ON. Can you modify code to switch joystick off and stop motors?
I would be very grateful. Actually, I will use this project to navigate wireless lawn mover. It will run motors over relays.
sir, if we use l298n then what will the hardware connections
do you have the code and diagram with the L298N?
can I use adafruit motor driver shield.
Can we use motor sheild instead of l293d
Servo sheild for audrino DC motor
can we use 11.1v lipo battery???
I've inputted the code, then the connection was okey, but regarding to connectivity ofmy bluetooth modeule and remotexy .. " Device not reply. RECEIVE TIME OUT"..
Steven Tesoro facing same problem is your problem solved
same problem occured in my project . what is the solution????
Will HC-05 work
can I build it for iPhone??
do you have a video Bluetooth controlled obstacle avoidance car?
use bluetooth to be my manual control and a button to trigger a automatic to manual mode.
Yep! Even I want to do this, it's like a two in one, it's an autonomous obstacle avoider then you flip a switch and it becomes remote controlled via your phone. Any idea how should I go about doing this?
Great Video :),can you show how to make fire fighter robot?
Btw what is the name of the soundtrack?
Can we use it to make rc plane
hello i made this project everything works but when i slide the joystick front the car moves left and when i slide the joystick left the car moves front could u help me figure out the problem?
Dude what is the approximate cost to make this robot??
Mert Arduino Tutorial & Projects thanks 😊
Hey nice project however when trying to connect the module to the app I receive this error, "Device not reply. Receive time out error" is there any way to fix this? Thanks in advanced.
nice video, and btw i planning on use arduino to send data from gyro sensor and receive it on PC,, how should i do it and what i need ? help me pls
Abi ben bir saattir deniyorum hiçbir şekilde HC-06 yı remote xy ye bağlayamadım nasıl yapıcam
I connect to the robot, from my phone, and the controller comes onscreen, but the car doesn't move. please help!!!!
What is the website for code android studio?
Great work bro keep going ...
Can I use arduino nano instead of arduino Uno? I have arduino nano, please reply
merhaba her zaman ki gibi güzel bir video olmuş. APK dosyasını göremedim kendimiz mi oluşturacağız. yoksa hazır dosya mı kullanacağız.
Çalışmalarını merakla bekliyoruz. Kolay Gelsin...
can I use hc05 with the same connections?
GamerSoft yes
Lovish Narang thnx
ok thnx
In love with thid channel , Thnax a lot
M getting "Device not reply .Receive time out error "
i have reconnected many times , still facing same problem
Anoop Kotarkar even, I got the same... anyone plz help?
Anoop Kotarkar check the tx rx connections
Mert Arduino and Tech
YOU ARE GREAT CAN YOU HELP ME WITH THIS QUERY
THAT I WANT TO USE ALL 4 MOTORS IN MOTOR DRIVER WITH 2 SERVOS ALSO SO I NEED MUCH POWER SO CAN I USE 12 VOLT RECHARGEABLE BATTERY THAT BIG AND HEAVY ONE (ONE INSIDE THE UPS).
PLEASE REPLY!!!!
Please gave the site that I download the app plz
Search on play store xy remote
bro can i use l293 adafruit motor driver please help me
amazing bro but i live in india and that g sensor web site is not opening in india can you help or give any suggestions
bhai nhi chal rhi hai tu link bhejde
Can I power it with power bank
socket connect error read failed socket might be close or time out
can i know how to control it with ESP8266? and the connection too?
can you make a obsacle avoding robot with bluetooth
Device not reply .Receive time out error
what to do??
@mert arduino ....can you please share the extra codes that you had added..i am doing this project i really need help
Can you plz gibe the connection forr l298n also i cant understand
"device could not reply receive time out error" plz help this is my first arduino project.
not connecting to app time error massages.. plz help
How to connect it with motor shield please give circuit diagram I want to make it with l2983d motor driver
what software is this?
***** I'm talking about the software for the layout that you used in the beggining
Yes, what are you using for the circuit schematic drawings?
It's called "Fritzing" :)
Sorry, Arduino cannot run 2 of the motor, because the maximum current is 30 mA. There must be an external voltage.
can we control arduino by GSM module
Vivek Pandya that would be hard you mean sending sms?
Yes you can :))
oh not this robot, but you can control arduino and make it send sms to you
can u make a code for voice control obstacle avoid car by using arduino and please a circuit diagram
am.getting
'receive time out" error in my mobile.. Anyone plz help me..
hey mert it always shows connection timed out ehat to do anyone pls tell
make a face recognition robot and thanku sir
this all tube is good. thank from saudi arabia
CAN I USE HC-05?
Liksn Snshsjxm yes u can
thank!
can u teach us to make a cheap robotic arm
Mert, I am getting an error message
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xa9
please help me
that's ok mert, take care of yourself. we need you for more such awesome projects. thank you for your reply. it started to work properly
what is apl
can tell me how download the apk and how connect with arduino?