Hey, not being critical, but that is not the correct sequence for properly tightening your front axle. The front axle nut should always be torqued first after tightening the pinch bolts; then loosen the right side pinch bolts, pump the front forks several times to allow the front fork to find a neutral position on the axle, and then tighten the right pinch bolts. Axle torque is 59 ft. lbs, and the pinch bolts are 17 ft. lbs. Other than that, great video. Thanks.
was just about to install one on my 17 kx 250 and wasn't certain about spacer/seal etc...the instructions with the product are minimal at best...haha...thank's much...Peace.
Hi , do you know the dimension of spacer/suport ( my enduro model AJP310R dont have any reference on Acerbis) , suspensión Sachs 48 mm /300 wheel 19 Tnks
Hey, not being critical, but that is not the correct sequence for properly tightening your front axle. The front axle nut should always be torqued first after tightening the pinch bolts; then loosen the right side pinch bolts, pump the front forks several times to allow the front fork to find a neutral position on the axle, and then tighten the right pinch bolts. Axle torque is 59 ft. lbs, and the pinch bolts are 17 ft. lbs. Other than that, great video. Thanks.
Michael Walker thanks for the insight!
The sentence “The front axle nut should always be torqued first after tightening the pinch bolts” is entirely unhelpful. Could you be more unclear?
I agree
was just about to install one on my 17 kx 250 and wasn't certain about spacer/seal etc...the instructions with the product are minimal at best...haha...thank's much...Peace.
Ah-chair-bees
Thanks for the tutorial. I ordered the same 2 products and with the help of this video I will put it on my ktm sxf 250! 😄😄
Thank you i actually needed this 🤙
What adapter is that
Hi , do you know the dimension of spacer/suport ( my enduro model AJP310R dont have any reference on Acerbis) , suspensión Sachs 48 mm /300 wheel 19
Tnks
how did you put the original spacer on the bracket?
It came with Allen bolts if I remember correctly
Can it be installed without adapter
no
All good, except the way you was tightening your front axle is not the correct sequence
Its pronounced.. A CHAIR BEES.