Attention to detail is the difference between good shops and great shops. Very good. Where did you route the power wire through the firewall? Is there a grommet behind the battery?
I like the power connection. I have used the larger versions before on large gauge wire. I will need to look into those smaller versions. Nice install.
Super neat! Super clean! Great attention to detail! I'm glad that you showed that down firing is still a great way to go! I requested that somebody do a down-firing sub box for me and was told that he would not do it! Then later on said that he would! I'm not going to mention his name nor his TH-cam channel!!!
nice clean install..... is the HD1200 too much power for the 10TW3 subs? did you use 4ohm or 8ohm subs? what did you use to get the signal from the car? I ask because i have HD1200 and HD 600 X4 amp and am looking to buy some 10TW3 subs for my car and trying to figure out what amp to use? My HD1200 use to run my 10W6 subs, but i want low profile subs now for my Audi - thx
Unbelievable work very nice watching your videos made me build a downfire box for my Durango and it was the best thing I could have done with my subwoofer ive got one 12" nvx d2 in the downfire box and it is unreal how good and clean it sounds thank you for a great video
Hello Patrick! than you so much for your comment, it really means a lot to the team. I am also glad you are having a great experience with your sound system, this option is fantastic.
Window brace both sides the woofer hole then window brace between the distance from end to edge of woofer. That will give the MOST structural support and will give a better thump. All about rigidity. Can also glue a layer of .25 all around which creates a laminated sheet and gives extra support plus room for designs. Lol
I just viewed your video on tik-tok came straight to TH-cam hoping to hear it . Never the less You guys did an awesome job .. so listen I have a 2016 Escalade and I need this enclosure with the Escalade badge but minus the added detail design . however I want the Escalade badge to illuminate . Can you build me this enclosure and ship it to me ?? I’m in Mississippi as well. I’m Sure you guys have some spec from a previous Escalade build 2015-2021 it’s all the same
Hey guys, I live in Philadelphia but I am interested in having you build this enclosure for my 24 Escalade. Can we discuss? What’s the best way to reach out to you guys? Also what did you use to pick up the signal from the factory head unit? And LC2i pro?
Hello! Thanks for reaching out!, please send your inquiries using this link. app.shopmonkey.io/quote-request/1a55efa0116ec3f4091212d8ff44aa3f?noExternalScripts=1
Hello! thanks for watching, if you would like to receive more information please send us your questions using the link bellow. app.shopmonkey.io/quote-request/1a55efa0116ec3f4091212d8ff44aa3f?noExternalScripts=1 Thank you! - Showtime Audio
You can tell this man is proud of his work and going the extra steps to make his customers happy. Well done, Sir.
Thank you so much! I will share your comment with the crew. 🙌🏼 🙌🏼
Attention to detail is the difference between good shops and great shops. Very good. Where did you route the power wire through the firewall? Is there a grommet behind the battery?
Thanks for your comment, we appreciate it. For more information about this build, please reach out to us (773)489-7469 -Jerry
Looks great man. Keep doing great things that is why you are in business. You have your own standards that stands out !!!! 💪🏾💪🏾
Thank you so much. We appreciate your comment 🙌
Very clean and tight. The badge is a real classy touch. Your style is on a whole other level. Rock on brother!
Thank you Barnes! We appreciate your comment 🙌🏼
Love this. That “13 degrees” is the business.
Thanks for your comment! We appreciate it 🙌
Great job, install looks perfect.
Thank you so much 🙌🏼
Very clean and attention to detail setup. Great idea
Thank you so much, we appreciate your comment
No space for sound? Why didn't you say No space for bass? Or No room for boom? Not enough trunk for bump? Lol
Thanks for your comment and suggestion. We appreciate it
I like the power connection. I have used the larger versions before on large gauge wire. I will need to look into those smaller versions. Nice install.
Thank you Byron 🙌
I would love to see 4 - 10" Trulli in this same box.
Thanks for watching. Yes, hopefully soon ...
Super neat! Super clean! Great attention to detail! I'm glad that you showed that down firing is still a great way to go! I requested that somebody do a down-firing sub box for me and was told that he would not do it! Then later on said that he would! I'm not going to mention his name nor his TH-cam channel!!!
I did a dual 10 set up with 2 earthquake slaps down firing in my 2020 ridgine! It bangs!! And hits low!!
😄 thanks for your comment
nice clean install..... is the HD1200 too much power for the 10TW3 subs? did you use 4ohm or 8ohm subs? what did you use to get the signal from the car? I ask because i have HD1200 and HD 600 X4 amp and am looking to buy some 10TW3 subs for my car and trying to figure out what amp to use? My HD1200 use to run my 10W6 subs, but i want low profile subs now for my Audi - thx
Hello!Thanks for your comment. Please reach out to us to give you a better answer (773)489-7469 -Jerry
Unbelievable work very nice watching your videos made me build a downfire box for my Durango and it was the best thing I could have done with my subwoofer ive got one 12" nvx d2 in the downfire box and it is unreal how good and clean it sounds thank you for a great video
Hello Patrick! than you so much for your comment, it really means a lot to the team. I am also glad you are having a great experience with your sound system, this option is fantastic.
Over the top man. Two thumbs 👍 👍 up!
Window brace both sides the woofer hole then window brace between the distance from end to edge of woofer. That will give the MOST structural support and will give a better thump. All about rigidity. Can also glue a layer of .25 all around which creates a laminated sheet and gives extra support plus room for designs. Lol
Beautiful work I need one for a 2001 gmc yukon sle with barn doors.
Thank you! We appreciate your comment. If you are interested in this enclosure or have any questions, feel free to reach out. (773)489-7469
I just viewed your video on tik-tok came straight to TH-cam hoping to hear it . Never the less You guys did an awesome job .. so listen I have a 2016 Escalade and I need this enclosure with the Escalade badge but minus the added detail design . however I want the Escalade badge to illuminate . Can you build me this enclosure and ship it to me ?? I’m in Mississippi as well. I’m Sure you guys have some spec from a previous Escalade build 2015-2021 it’s all the same
Do it Bump doe
Hey guys, I live in Philadelphia but I am interested in having you build this enclosure for my 24 Escalade. Can we discuss? What’s the best way to reach out to you guys? Also what did you use to pick up the signal from the factory head unit? And LC2i pro?
Why didn’t you put the amp in the back under the carpet in the cargo tray?
I really want four of those feet to put on to my sub box! How can I get them sir?
Hello! Thanks for reaching out!, please send your inquiries using this link.
app.shopmonkey.io/quote-request/1a55efa0116ec3f4091212d8ff44aa3f?noExternalScripts=1
@@showtimeaudio Heaven hi! You are welcome! Thank you!
It looks amazing! Most importantly though, how does it sound?
Thank you! unfortunately we cant do demos through videos. But it sounds amazing.
@@showtimeaudio yeah demos through video never sound good. Thank you for your response, I'm glad it turned out so well!
How much to build a sub box like this for a 2018 Lincoln navigator L?
The real question is how does it sound.
Hello! actually sounds great. Unfortunately we can't demo sound through videos.
What are the going prices?
Hello! thanks for watching, if you would like to receive more information please send us your questions using the link bellow.
app.shopmonkey.io/quote-request/1a55efa0116ec3f4091212d8ff44aa3f?noExternalScripts=1
Thank you!
- Showtime Audio