if it is pre-mixed plaster, refer to manufacturer material data sheet. it varies but average 0.3 MPa minimum. For in situ plaster refer to British Standards.
Dear Mr. probib kumat, good informative video. Also, Please tell what is the name of pull out test equipment, current reading and required reading with unit. Thanks.
Circular pull-head plates, made of stainless steel, with diameter of 50 mm ± 0.1 mm and minimum thickness of 10 mm. These plates shall have a central fitting for connection to the direct pull tensile force apparatus.
Hi, I can provide you the contact details of the test agency at Muscat, Oman. I think you are looking for Indian agency. Please let me inform that for which location you are looking for?
half of test explained sir... how to cut plaster in circle shape, its deep how to fix dolly in that grove, which adhesive required how many times to set adhesive after that you explain next procedure
Thanks for your comments. Plaster cut in circle shape buy pull up test. Dolly fixed by glue at least 24 hours. At this moment I have forgotten the adhesive name.
@probir Saha - do you know any govt authorized quality testing firm which conducts this in kerala ? I am facing some plastering issue in my apartment and builder is saying plastering is fine. I want to understand how to verify that. Also is there any govt lab in kerala which takes plastering sample and do some testing to measure the cement/sand ratio.
Sir, if you explain about readings and reference range of pull out test is much appreciated.
Its Really a amazing work👏🏻
i need more information about this pull off test.Sir can u please let me know??
Please reply backsir
Is there any test to check the plastering work in wall (inner wall plastering and outer wall plastering)
Yea, the same test for inner and outer wall
@@probirkumarsaha thank you
How much minimum values required for pullout test withunit of measurements
if it is pre-mixed plaster, refer to manufacturer material data sheet. it varies but average 0.3 MPa minimum. For in situ plaster refer to British Standards.
Thanks for latest update
Dear Mr. probib kumat, good informative video. Also, Please tell what is the name of pull out test equipment, current reading and required reading with unit. Thanks.
Sir do u get any information about this equipment??
Equipment name and how many samples to be taken and is it also same for gypsum?
How much plaster strength required in N/mm2 ?
What is acceptance criteria?
The test will work reliably over an adhesion strength
range between 0.2 and 50 N/mm2.
Any contacts of the agency to conduct this test in Bangalore ?
Nice video
Kindly let me know the your testing strength
What is the is code can any one recommend
what are the criteria for this test?
Circular pull-head plates, made of stainless steel, with diameter of 50 mm ± 0.1 mm and minimum thickness of 10 mm. These plates shall have a central fitting for connection to the direct pull tensile force apparatus.
@@probirkumarsaha Thanks for your reply...
Kindly I want to know the maximum and the minimum of tensile force of this test.
Can you get your number
What is unit of measure?
What is standard strength of bonding we have achieve??
On 14 th day test what N/sqmm u got the result ? Thickness of plaster
Could you provide contact detail for same .....plaster pull out test agency
Hi, I can provide you the contact details of the test agency at Muscat, Oman. I think you are looking for Indian agency. Please let me inform that for which location you are looking for?
Dear Sir can you provide the Contact details of testing agency in DEHLI NCR india.
Testing agency I know in Oman only.
half of test explained sir...
how to cut plaster in circle shape, its deep
how to fix dolly in that grove, which adhesive required
how many times to set adhesive
after that you explain next procedure
Thanks for your comments. Plaster cut in circle shape buy pull up test. Dolly fixed by glue at least 24 hours. At this moment I have forgotten the adhesive name.
@probir Saha - do you know any govt authorized quality testing firm which conducts this in kerala ? I am facing some plastering issue in my apartment and builder is saying plastering is fine. I want to understand how to verify that. Also is there any govt lab in kerala which takes plastering sample and do some testing to measure the cement/sand ratio.
Hi, Sorry I don't know.... Thanks for your question.
@@probirkumarsaha do you know the standard value for the pressure required in India for apartments when the plastering test succeeds ?
Hi, I think this docs may help you. www.mpwrd.gov.in/documents/18/b6596087-233a-49ad-9c2e-b4fb39237994
mddaonline.in/downloads/MDDALINKS/pdf/nbc.pdf
Hi i am PhD research scholar at IIT Bombay. can you please send me the equipment specification, I want purchase this. @probir saha
Hi, Extremely sorry. At present I am not in position to help you. Anyway I will try to help you.
@@probirkumarsaha thanks for your reply. i am waiing for the machine specification. or please give me the suppliers information.
Learning video...