@KSKVideos this is a reply to the comment i deleted thanks for the apology @KSKVideosI may of rushed to judgment with some of my comments i did not expect you to say this so maybe I did a rush to judgment my thing is when me and my 2 best friends and one best friends girlfriends 4 of us where very close we all where 15 years old and did all things together forgot the ps1 and went in the 1995 geo Prizm on the way back on a undivided turnpike in ct where i grew up a drunk driver hit us head on killed the girl driver and best friend behind her crushed to death in the back nest to me and in front of me was the girls boyfriend my best friend me and him survived happened in a Nano sec in slow motion changed our lives 4ever i still think of what she and he would of become if it was me that sat there that day so please think b4 you need to go get a pic it comes from a place of hurt and not hate thanks for your apology and sry i rushed to back comments
This just happened to me a few hours ago. I was on the highway doing 55 when I got what felt like a death wobble out of nowhere. Next thing I know my front driver side fender blows out and my tire bounces down the highway off into the sunset. Had traffic all around me but thank god my car or tire didn’t hit anyone else.
your very chill about the whole thing my front tie rod somehow broke and had one wheel go right and left go left swirved a little and now everything is bad sway bar bent,inner tie rod and both cv axels are broke sigh... fml... your car is clean 👌 sounds beautiful
That suck man! This is one of my my deepest fears wheel falling off . At least u were going fast on the freeway going 100 miles per hour. Still a bad situation but the best it could have played out give how bad it could have been
Ive had this happen on my 2000 mustang. All i needed to do was change the axle bearing, lugs, new lug nuts, wheel, and rotor. However, a few years later i hade a shop installing gears and they said i had a bent axel.
@ 6:05 and a few seconds after, Looks like u had a wheel spacer too thick . You didn't get enough revolutions on each lugnut. Did you use that spacer because the wheel was rubbing on the brake caliper or something else? Or you used it to get the wheel about 3/4 inch further out?
dont feel too bad i just did this exact thing in my 96 caprice like 4 hours ago. luckily my 20s got stuck in the wheel well. but before it fell off i pulled over and walked next to the car in drive, saw the wheel wobbling and my dumbass still tried to limp it home on the highway, then slam.
I've had it happen before I just had to replace the rotor and rim almost my whole tire but the owner of the field it flew off in helped me out and found it for me
That’s super crazy. I would have put the jack under the passenger side or used the cars factory jack on the punch weld on the passenger side. Where you lifted with the jack has some fuel tank lines and hoses so not a good spot. Good luck
That’s true but unfortunately it was near impossible to get it under that side, the jack was right on the support bar and I didn’t see any lines or hoses but I’ll definitely double check to make sure!
Just a heads up to ensure this doesn’t happen to you - if the lugs had been properly torqued this doesn’t happen, not just once! After changing wheels one needs to go drive for a few miles then retorque. This is what happens when this step gets skipped. And it does. All the time. Just sayin. Safe travels.
@@kskvideos mines doing the same thing. Only does it at start or when I’m at a stop light. Currently getting it cammed and getting valve seals done I’ll let you know if it fixed my problem.
@@joseloyola5867 nice, yeah I’d appreciate that! Check out streetcar shenanigans channel, he has a video listed as cobras burning oil and he talks about blue smoke on startup
@@joseloyola5867 my 03 cobra does it on cold starts it’s done it since I have owned it lol read on it and like he said it’s the valve seals but it’s a common problem with 4v
Yeah This don’t just happen life was not torqued rite or bad spacer or no hub centric ring this was installer error people that think they know what they are doing often kill people when there junk job backfires
I might have done this April fools thing wrong...
@KSKVideos
this is a reply to the comment i deleted thanks for the apology @KSKVideosI may of rushed to judgment with some of my comments i did not expect you to say this so maybe I did a rush to judgment my thing is when me and my 2 best friends and one best friends girlfriends 4 of us where very close we all where 15 years old and did all things together forgot the ps1 and went in the 1995 geo Prizm on the way back on a undivided turnpike in ct where i grew up a drunk driver hit us head on killed the girl driver and best friend behind her crushed to death in the back nest to me and in front of me was the girls boyfriend my best friend me and him survived happened in a Nano sec in slow motion changed our lives 4ever i still think of what she and he would of become if it was me that sat there that day so please think b4 you need to go get a pic it comes from a place of hurt and not hate thanks for your apology and sry i rushed to back comments
This just happened to me a few hours ago. I was on the highway doing 55 when I got what felt like a death wobble out of nowhere. Next thing I know my front driver side fender blows out and my tire bounces down the highway off into the sunset. Had traffic all around me but thank god my car or tire didn’t hit anyone else.
That’s crazy!
Mine did death wobble I was doing 20 miles a hour I slowed down it stopped
You did a really good job torquing those wheels 🛞
Parts can always be replaced but pricey lol, glad you’re good bro 🖤
This happened to me today….. I wasn’t going real fast but it did dent my car……. I was just sick but thank The Lord I was ok
yep, it happened to me too. It was a struggle getting the jack under to work on it, in there heart of the traffic.
your very chill about the whole thing my front tie rod somehow broke and had one wheel go right and left go left swirved a little and now everything is bad sway bar bent,inner tie rod and both cv axels are broke sigh... fml...
your car is clean 👌 sounds beautiful
That suck man! This is one of my my deepest fears wheel falling off . At least u were going fast on the freeway going 100 miles per hour. Still a bad situation but the best it could have played out give how bad it could have been
Seems like this happens allot more than I thought happen to me last night🤦🏻♂️
Ive had this happen on my 2000 mustang. All i needed to do was change the axle bearing, lugs, new lug nuts, wheel, and rotor. However, a few years later i hade a shop installing gears and they said i had a bent axel.
You know whats crazy i used those same lug nuts and 3 of my studs broke off and messed my brand new wheels up
I didn't know you were chill like that
Ayo you dropped this vid on my birthday😂💙
Bro ur something else.cars on the ground wheels destroyed and u said look at that fitment.lol.i love that car bro
Lol it was really good fitment
@@kskvideos bro that's awesome that in a time like that I could still remain calm and happy.wish more people could be like that.
@ 6:05 and a few seconds after, Looks like u had a wheel spacer too thick . You didn't get enough revolutions on each lugnut. Did you use that spacer because the wheel was rubbing on the brake caliper or something else? Or you used it to get the wheel about 3/4 inch further out?
Glad you’re okay though bro. 🙏🏿
Thanks man
That’s crazy , glad you’re okay.
Thanks man
Are you running extended wheel studs?
No but I plan to now
Love your ride it's super clean.
dont feel too bad i just did this exact thing in my 96 caprice like 4 hours ago. luckily my 20s got stuck in the wheel well. but before it fell off i pulled over and walked next to the car in drive, saw the wheel wobbling and my dumbass still tried to limp it home on the highway, then slam.
So what caused this? What are the chances that all nuts come out?
This literally just happened to me last night with my Saab…. I’m heartbroken
What type of damage could this cause your vehicle after a tire flying off like that?
I've had it happen before I just had to replace the rotor and rim almost my whole tire but the owner of the field it flew off in helped me out and found it for me
That’s super crazy. I would have put the jack under the passenger side or used the cars factory jack on the punch weld on the passenger side. Where you lifted with the jack has some fuel tank lines and hoses so not a good spot. Good luck
That’s true but unfortunately it was near impossible to get it under that side, the jack was right on the support bar and I didn’t see any lines or hoses but I’ll definitely double check to make sure!
This deeply saddens me...
Just a heads up to ensure this doesn’t happen to you - if the lugs had been properly torqued this doesn’t happen, not just once! After changing wheels one needs to go drive for a few miles then retorque. This is what happens when this step gets skipped. And it does. All the time. Just sayin.
Safe travels.
Shoutout to the gang who went back to check the previous thumbnail
That rear fitment lol
More new edge content 👋🏻
what caused this?
You're lucky that road didn't have 6" curbing. The whole bottom of the car plus suspension would've been skewed and totaled it.
Do you know what that blue smoke is when you start the car?
I’ve heard it’s the valve seats and seals, I plan to delete the pcv and run a catch can for both covers to see if it helps any
@@kskvideos mines doing the same thing. Only does it at start or when I’m at a stop light. Currently getting it cammed and getting valve seals done I’ll let you know if it fixed my problem.
@@joseloyola5867 nice, yeah I’d appreciate that! Check out streetcar shenanigans channel, he has a video listed as cobras burning oil and he talks about blue smoke on startup
@@joseloyola5867 my 03 cobra does it on cold starts it’s done it since I have owned it lol read on it and like he said it’s the valve seals but it’s a common problem with 4v
@@modlist6129 thanks bro, hoping that’s my problem as well. I’ve heard these 4.6’s love doing that lol
That legit just happened to me I can’t wtf just happened
Just happened To my dropped truck and on the same side same scenario
Hy, this happened to me yesterday,
What caused this ?? This scares the shit outta me man
Loose lug nuts.... Torque 'em to spec and re-torque after 50 miles.
If you jacked the front drivers side up the back would come up too. I hope everything is ok.
Yeah This don’t just happen life was not torqued rite or bad spacer or no hub centric ring this was installer error people that think they know what they are doing often kill people when there junk job backfires
That happened to my mom car last night
Serious damage I’m sure
Could be worse
I’d still buy them
Lucky you wasn’t going any faster or even worse on the highway
No kidding
This seems fakers than a 3 dollar bill.
It is
had this happen to me, its not really fun
Typical headline "This just Happened"...
🗑️🗑️🗑️
You’re right
Whatever tho bro atleast they just sve wheels
Sve wheels need love too
How the hell
That’s what I’m saying, either the spacer was too big or I didn’t tighten the lugs enough...
@@kskvideos it’s unfortunate but glad you’re ok.
@@JaVvii3 yeah it definitely could’ve been worse!
Yiu car puffs blue on start
Means I need more hp