Hi thank you for this video tutorial, @Bryan Sigamoney my cousin and I did the heater valve replacement on Friday 19th August. It took us about 1 hour 30mins to replace and get the car started and running again. Be we both did it, we didn't remove the injectors or harness. For anyone who reads this comment and wants to attempt this please ensure you have the correct tools on hand.
Thanks for uploading this video. One of the coolant hoses that connect to the heating flange started leaking on my ibiza. Managed to replace it thanks to this video. Saved me a hefty bill at the garage!
Thanks for the video, it helped! I also did not remove the fuel rail, just removed the fuel line, vacuum line, and unclipped wiring harness. Need size 8 spline (triple square) for the manifold bolts, T20 for the heater pipe to manifold screws. If you need to replace the PCV flex pipe then youll need T30 as well. Mine was going well until the PCV breather split 😭. Another 1200 from the agents. But at least its done.
After watching your video, I bought a heater valve then I became lazy to dissemble everything. Going from bottle return pipe to heater valve, I found out it was leaking from nipple of heater valve, when I touch it, it fell off. 1) bought 2 metre pipe with 2 clamps. 2) Remove the top return pipe from the water bottle and the one from radiator. 3) Run the pipe from the radiator to water bottle behind airbox with the help of cable ties. 4) Use clamps to tighten the pipes. End to end. You've successfully bypassed the heater valve with straight connection. Remember not to disconnect the original heater valve, we've bypass water not air. Check water level after driving 50km still on that level. I've got peace now, I can now put antifreeze without no fear. Your video help me a lot. Thanks👍🏿👍🏿
Helpful video thank u bro, I also have a heater problem. It doesn't make warm, I already changed thermostat bt still. I now gonna try to do what u showed me. Thank u and god bless u
Awsom video. Thank man... im having a heating problem...but its not constant... Tried almost everything now... Changed the thermostat housing 3 times now. Changed the bottle with the cap. Done a chem test to check the head. Flushed the radiator about 10 times now. Pump working good. Fan working 100s Not sure whats next
Thanks for the video bro, replace mine today, may I ask why you removed the injectors from the throttle body while there's ample space to work with? No offense
I see that you in hindsight recommend leaving the injector rail in place. From the video it would appear that you will battle to access the intake manifold mounting bolts with the injector rail in place. Your thoughts?
As far as I can remember, it shouldn’t be an issue because the intake bolts are not exactly underneath the injectors. Just remember however to disconnect the wiring harness from the injectors and fuel pipes.
I have a VW Polo 2009 1.4 trendline. I have done the head gasket skimming due to overheating. After 14 years of driving 379 000 km I am starting to feel the pressure of fixing the engine
I see you using engine flush, I've never used it on my car it's reaching the 200k mark. Would it be good to use it? Are there any risks involved with using engine flush? Love the content as always 💪💪
I would recommend using engine flush especially with a car at your km because it helps clean out any sludge build up in the engine, loosens grime and deposits that's been accumulating so that the engine can is clean and run better, the polo is above 200k and that's why I did an engine flush🙌👊
Super buddy i'm new on your channel i have the same problem with that leak asked vw if they could take a look at it they was quoted almost 5k😅 will definitely change it myself...and just a quick question what could cause hard start when the engine is warm or if parked in the sun but if cold no problems. Like for instance in the morning no problems what so ever only when the engine is warm or parked on direct sunlight...vw polo ..thanks
Hi thank you for this video tutorial, @Bryan Sigamoney my cousin and I did the heater valve replacement on Friday 19th August. It took us about 1 hour 30mins to replace and get the car started and running again. Be we both did it, we didn't remove the injectors or harness. For anyone who reads this comment and wants to attempt this please ensure you have the correct tools on hand.
Thank you,you have just sorted my cars leaking issue I almost replaced the whole intake manifold!!! Yoh very help full bro...
Glad we were some help bro. 🙌
Thanks for uploading this video. One of the coolant hoses that connect to the heating flange started leaking on my ibiza. Managed to replace it thanks to this video. Saved me a hefty bill at the garage!
Thanks for the video, it helped!
I also did not remove the fuel rail, just removed the fuel line, vacuum line, and unclipped wiring harness.
Need size 8 spline (triple square) for the manifold bolts, T20 for the heater pipe to manifold screws. If you need to replace the PCV flex pipe then youll need T30 as well.
Mine was going well until the PCV breather split 😭. Another 1200 from the agents. But at least its done.
After watching your video, I bought a heater valve then I became lazy to dissemble everything. Going from bottle return pipe to heater valve, I found out it was leaking from nipple of heater valve, when I touch it, it fell off.
1) bought 2 metre pipe with 2 clamps.
2) Remove the top return pipe from the water bottle and the one from radiator.
3) Run the pipe from the radiator to water bottle behind airbox with the help of cable ties.
4) Use clamps to tighten the pipes. End to end.
You've successfully bypassed the heater valve with straight connection. Remember not to disconnect the original heater valve, we've bypass water not air.
Check water level after driving 50km still on that level. I've got peace now, I can now put antifreeze without no fear. Your video help me a lot. Thanks👍🏿👍🏿
I m trying this too. The heater valve can stay there behind intake?
What a really helpful video, you have sold me on your do it yourself videos for issues outside standard service.
Appreciate it man👊🏼
Helpful video thank u bro, I also have a heater problem. It doesn't make warm, I already changed thermostat bt still. I now gonna try to do what u showed me. Thank u and god bless u
I knew I recognised you from somewhere! I was your driving evaluator for the Uber. Congrats on passing. Great driver!
No way, what a small world man. Appreciate it bro.
Bra my polo its not heating inside the car .only aircon that works. No heater,do you think its a valve problem?
Thank you so much for the detailed explanation. Have a similar coolant leak. Will give it a shot.
We learn a lot from this video thanks
Awsom video. Thank man... im having a heating problem...but its not constant...
Tried almost everything now...
Changed the thermostat housing 3 times now.
Changed the bottle with the cap.
Done a chem test to check the head.
Flushed the radiator about 10 times now.
Pump working good.
Fan working 100s
Not sure whats next
Thank you for the video. I replaced the part with your help. Good luck to you.
Big bro thanks a million i was nearly scammed bt thanks to u bra keep winning
Hey I am having the same problem,did manage to get yours rightn what was the cause if u did thanks?
Thank you so much please send us more videos.
We appreciate ur assistance.
Thank you for the video. Been wondering why my water is running low every week.
Very helpful video, will definitely give it shot
Thanks for the video bro, replace mine today, may I ask why you removed the injectors from the throttle body while there's ample space to work with? No offense
Hey my brother do you know where i can find that spline socket to loosen the bolts on the intake manifold
Great video bro had same problem it helped me so much, u r appreciated.
Hello thanks for video tutorial,
I'm curious about your car's engine code. I assume it's a 1.4L, but which one specifically?
Howzit. Thank you for the upload, any chance you can tell us what size spline is used for removing the intake from the head?
Bryan, please share with everyone exactly what tools we used in order to make their heater valve replacement go smoothly.
M8 / 8mm
Golden knowledge bro...
I see that you in hindsight recommend leaving the injector rail in place. From the video it would appear that you will battle to access the intake manifold mounting bolts with the injector rail in place. Your thoughts?
As far as I can remember, it shouldn’t be an issue because the intake bolts are not exactly underneath the injectors. Just remember however to disconnect the wiring harness from the injectors and fuel pipes.
Thank you so much, am gonna replace mine tomorrow 😉
Nice work my brother ❤
Howzit man, pipe from thermostat housing water pipe I need to remove upper water flange from the radiator. How to do it
I LIKE THE BLACK TEE!!! WE NEED TO KNOW WHEN THE MERCH AVAILABLE!
DOPE VIDEO!! INFORMATIVE!
Thanks Weezo, we only have the white tees at the moment but the black will come soon
Hi there bro i need help with my bky alternator its not charging i put the bky in bby polo body
The pipe that goes on th heater control valve the 1 you pointed out what's it called??
Thank you young man 😊
Which ln key size did you use to remove the manifold? I tried T40 and T45 but they dont fit, T40 is smaller and T45 is bigger than the screws
it's a spline socket M8, I also struggled to get the right size
My polo vivo there is no heat coming out of the vents can this also be the reason
Was the car only blowing cold air?
Do you have a part number of the replaced part please. Thanks
Thnks bro helpful video 👌👍
Did the heater valve coz overheating problems?
did you also have problems with the cabin heating before replacing the heater valve?
what's that pipe for, the one you are holding at 6:26
does this leak cauuse passenger floor to be wet
My retun pipe was leaking wen I pulled it to replace it the nipple came with the pipe pls help
Correction please I went to buy 10mm spline socket which way too big, I think 8mm is the right one
Thank you for the video
I have a VW Polo 2009 1.4 trendline. I have done the head gasket skimming due to overheating. After 14 years of driving 379 000 km I am starting to feel the pressure of fixing the engine
I see you using engine flush, I've never used it on my car it's reaching the 200k mark. Would it be good to use it? Are there any risks involved with using engine flush? Love the content as always 💪💪
I would recommend using engine flush especially with a car at your km because it helps clean out any sludge build up in the engine, loosens grime and deposits that's been accumulating so that the engine can is clean and run better, the polo is above 200k and that's why I did an engine flush🙌👊
great video.
Where are you located?
What if you replaced the heater valve you still don't have heat?
How to see if the heater valve is leaking?
How do I get the sticker man liken it
how long you had this leak?
Why do you have to change heater velve
Where did you buy your coolant from?
Goldwagen
Nice work bra, 👍🏻nxa video
Thanks Tyrone🙌
@@crispyworx2360 ❤️👍🏻
My car is leaking n i don't know where is liking
My polo vivo, heater is not blowing, only cold air
hi my 2014 coolent is turning brown
Need to use coolant as water is causing rust
I'm having problem on my POLO it losses power going uphill, (it's decelerating)
Did you win, Im currently experiencing the same problem
@@philaningcobo3640 did you get any help?mine is also decelerating on a uphill.
It eventually stopped, only to find that the engine top is leaking coolent. Now to take for engineering
@@philaningcobo3640 bought throttle body cleaner, change air filter, fuel line cleaner and change fuel pump also the fuel filter
you brilliant!
Super buddy i'm new on your channel i have the same problem with that leak asked vw if they could take a look at it they was quoted almost 5k😅 will definitely change it myself...and just a quick question what could cause hard start when the engine is warm or if parked in the sun but if cold no problems. Like for instance in the morning no problems what so ever only when the engine is warm or parked on direct sunlight...vw polo ..thanks
Im trying this
❤
Great video, but please don't add the music.
I'm getting a warning ⚠️ sign and an Abs sign
Need a sticker 🤟
I wnt a sticker plz
Contact details please
Send me a sticker. I'm from the northern cape
Send us a dm on Instagram
Helpfull video danki bru
Thank you for the video
Thank you for the video