This is a great example of how to make an excellent "how to" instructional video, everything is so clearly explained and identified. I wish everyone making instructional videos could learn from the tequniques he uses. Thanks so much.
I ordered this : ( 2017-2022 Honda CR-V : Rear End Cap Painted (OEM) - Passion Red Pearl (R539P) | 2017-2019 / Upper / Right, Passenger-Side) from ReveMoto and received it about three weeks later. I watched this video and installed it with my 16-year-old daughter in about 20 minutes. The color match was amazing, easily as good as most any new car bumper to panel match.
Thanks Revemoto. The video was super helpful. Other than since I was replacing only one bumper and you really don’t need to takeoff the other one too to drop the bumper down far enough to replace the one side. But it explained it very well. I did have to replace the trim strip as there is a clip that is part of it that is impossible to get off without breaking it. I also bought the painted and clear coated bumper and which was a perfect match. Thanks for your help guys very professional. Tony in Breckenridge, Colorado.
Thanks for the tip, I give a reverse on the concrete wall with my right rear back and now it get a gap on the rear back door. I will dissemble to take a look if I need to pull it back 😮
Great video! Perfect, easy to follow instructions. Was pleasantly surprised to see that the Honda frame clips don't get destroyed on removal like many other manufacturers.
Great video with really clear instructions. I have just used it to replace the wheel trim rather than the whole end cap, so really appreciated how you took it step by step. Thanks very much.
Thanks for sharing the easiest way thats big help .boss how can i remove right rear fender where around the gas tank side coz i have dent on that metal side so i need to remove easy for me to push the dent.thanks appreciated.
Wow, that looks easy. Someone just hit and cracked my right side bumper end cap. Don't want to involve insurance because i think I can save money. Your video shows I can do this myself.... thank you. Now to see how much the one side will cost.
Thank you for watching! We sell the end cap painted. We guarantee the color match and fitment. You will save money by not going through insurance in the long run. Checkout our website and End cap here; bit.ly/17-19CR-VEndCap
Nice job! Can you please tell us what is under the part you removed at 5:37 in the video. My Left blind spot sensor is not working and another piece is ruined that assists in opening and closing the door. What is that called?
Hi, on the top part of the End cap that butts up long the bottom of the tail light, does it just snap into place to become flush? I have a 2020 and the end cap popped out when my daughter reversed into a pole, cracked the tail light lends (needing replacement as well)
Hello and sorry to hear about that. You would have to see if the metal frame is bent or preventing the bumper from popping into place. Also, check the bumper end to see if the clips are broken. There are also clips under the tail light that also may be broken. Please let us know if you have questions but check those things first. Good luck!
@@robertbowman5272 you could probably take it off without taking the whole bumper off. There should be clips underneath and clips in between the bumper and lower trim.
How do I remove my rear passenger side, right fender? A tree branch fell and left a dent on it. Do I need to follow these procedures to remove the rear bumper to access that? I'm thinking of banging the dent out, size of a tennis ball
Hello Ricky! The process should be the same, just mirrored since it's on the other side. If there is a dent on the plastic end cap, use a heat gun or hair dryer to warm the panel. Make sure not to constantly move the heat gun and then push the dent out. Thanks for watching!
Purchase your newly painted end cap here : bit.ly/17-19CR-VEndCap
Visit us at : www.revemoto.com
For any other painted auto body parts!
This is a great example of how to make an excellent "how to" instructional video, everything is so clearly explained and identified. I wish everyone making instructional videos could learn from the tequniques he uses. Thanks so much.
I ordered this : ( 2017-2022 Honda CR-V : Rear End Cap Painted (OEM) - Passion Red Pearl (R539P) | 2017-2019 / Upper / Right, Passenger-Side) from ReveMoto and received it about three weeks later. I watched this video and installed it with my 16-year-old daughter in about 20 minutes. The color match was amazing, easily as good as most any new car bumper to panel match.
Thank you so much for your purchase!! If possible would love so before and after photos:).
Thanks Revemoto. The video was super helpful. Other than since I was replacing only one bumper and you really don’t need to takeoff the other one too to drop the bumper down far enough to replace the one side. But it explained it very well. I did have to replace the trim strip as there is a clip that is part of it that is impossible to get off without breaking it. I also bought the painted and clear coated bumper and which was a perfect match. Thanks for your help guys very professional. Tony in Breckenridge, Colorado.
@TonyKimLord Appreciate it! Subscribe to us as we're always adding more videos to help you DIY!
Thanks for the tip, I give a reverse on the concrete wall with my right rear back and now it get a gap on the rear back door. I will dissemble to take a look if I need to pull it back 😮
Hopefully not! If you need the end cap go to www.ReveMoto.com
This video saved me $500+, thanks. Excellent demonstration. Kudos. Liked and subscribed.
Glad to hear it!
Great video! Perfect, easy to follow instructions. Was pleasantly surprised to see that the Honda frame clips don't get destroyed on removal like many other manufacturers.
Thanks for watching! We do our best not to break the clips but they're very easy to replace.
Great video with really clear instructions. I have just used it to replace the wheel trim rather than the whole end cap, so really appreciated how you took it step by step. Thanks very much.
Thank you so much and super happy I was able to help out! Go to www.ReveMoto.com if you need any painted autobody parts!
Very good video. Simple direct instructions. Thanks
Glad it was helpful!
What size Philips screw do they use above wheel arch on wing?
I would just recommend reducing the sound of the song by half it’s not necessary that loud but great video
Appreciate the feedback. Yeah we have since removed the music on the newer videos. Thanks for watching. Go to www.ReveMoto.com
Thanks for sharing the easiest way thats big help .boss how can i remove right rear fender where around the gas tank side coz i have dent on that metal side so i need to remove easy for me to push the dent.thanks appreciated.
Wow, that looks easy. Someone just hit and cracked my right side bumper end cap. Don't want to involve insurance because i think I can save money. Your video shows I can do this myself.... thank you. Now to see how much the one side will cost.
Thank you for watching! We sell the end cap painted. We guarantee the color match and fitment. You will save money by not going through insurance in the long run. Checkout our website and End cap here; bit.ly/17-19CR-VEndCap
Nice job!
Can you please tell us what is under the part you removed at 5:37 in the video. My Left blind spot sensor is not working and another piece is ruined that assists in opening and closing the door. What is that called?
Are you referring to that box looking thing attached to the body?
@@ReveMoto yes. It has flaps on it and is plastic, I think.
Awesome video! Well done.
Thank you so much! Glad it helped. Go to www.ReveMoto.com for any parts you need
Hi, on the top part of the End cap that butts up long the bottom of the tail light, does it just snap into place to become flush? I have a 2020 and the end cap popped out when my daughter reversed into a pole, cracked the tail light lends (needing replacement as well)
Hello and sorry to hear about that. You would have to see if the metal frame is bent or preventing the bumper from popping into place. Also, check the bumper end to see if the clips are broken. There are also clips under the tail light that also may be broken. Please let us know if you have questions but check those things first. Good luck!
The best video! Thanks
Wow thank you so much! So glad it helped you out. If you need any parts for your car go to www.ReveMoto.com. Thank you again for watching.
We're did you get the new quarter panel.?
We sell it at revemoto.com - you can get this exact part here here: www.revemoto.com/products/2018-honda-crv-rear-bumper-painted
Perfect thank you
Glad to help! If you need the replacement cap painted, you can get it here: bit.ly/17-19CR-VEndCap
Can you make a video replacing the tailgate.
I will keep you in mind if this car comes back into the shop. If you need the tailgate for you car go to www.ReveMoto.com
Can you remove the bottom trim without taking the whole bumper off ?
@@robertbowman5272 you could probably take it off without taking the whole bumper off. There should be clips underneath and clips in between the bumper and lower trim.
How do I remove my rear passenger side, right fender? A tree branch fell and left a dent on it. Do I need to follow these procedures to remove the rear bumper to access that? I'm thinking of banging the dent out, size of a tennis ball
Hello Ricky! The process should be the same, just mirrored since it's on the other side. If there is a dent on the plastic end cap, use a heat gun or hair dryer to warm the panel. Make sure not to constantly move the heat gun and then push the dent out. Thanks for watching!
Thank you 🙏
You are very welcome. Hope it was an easy fix for you. Go to www.ReveMoto.com for more parts
It's awesome video, thank you so much bro ;)
You're welcome!
You should have remove the bottoms clips first before pulling the bumper off.
I like to remove the top clips first before bottom cuz it tends to fall down.