I believe the blade is on backwards. With the connecting rod spinning counter clockwise it will pull the back end of the saw down to engage the teeth and tend to lift during the push stroke. It will probably cut better with the teeth pointed toward the motor
I think you should show that you have discharged the capacitor properly. I worry every time people are holding them incorrectly. Please and thank you :)
Be very carefull and use protection (face mask, gloves) when removing paint from old machines and ba wary to remove any dust. It was very usual in old times to use lead based paints, especially base paints. Lead is extremely dangerous and it is poison. I advise you to use some kind of chemical paint remover and not brush wheel.
![Underwater Pneumatic Reciprocating Saw [Restoration]](http://i.ytimg.com/vi/t7In-zbH42I/mqdefault.jpg)
![Underwater Pneumatic Reciprocating Saw [Restoration]](/img/tr.png)
a very nice restoration young man from a 70yr old in Australia
You are a positive person.. I love your posts that make me feel optimistic and cheerful. traffic acceptance
Комментарий в поддержку канала и ролика, а также труда мастера.
I love watching you fixing old stuff makes me feel better
A very nice restoration and it's nice to see you fitted new bearings .cheers from Australia 🇦🇺
FICOU NOVO
Ficou perfeito amigo 👏👏
Excelente trabajo.
Excellent job and a working tool to boot! Nice job👍
good job is perfect bon travail c'est parfait
Deu um trabalhão, mas ficou ótimo. Parabéns 👏👏
Super work and beautiful 😍💞
Nice restoration, enjoyed the video. And that is a good machine which should come very usefull in the workshop. Thanks for posting.
Very nice restoration, try to use a little oil on the blade when cutting and the blade will stay sharp and last longer.
Подскажите в чём вы отмываете ржавые детали, если не секрет......лайк с меня 👍👆👍👍👆👍👆👆👍
A bit more grease needed during reassembly, otherwise a super job, well done.
Great job!!!!
Blade's on the wrong way round...
Mechanical hacksaws cut on the PULL stroke
🇬🇧🙂
Always the push in the uk mate
@@bradleypease2492
Rubbish.
🇬🇧🙂
Great work 👏
Great job
Valeu! Adoro o seu trabalho.
Well done.Good work!
Прикольно. Но болгаркой быстрее.
Great come back ! We need more videos please 🙏
I believe the blade is on backwards. With the connecting rod spinning counter clockwise it will pull the back end of the saw down to engage the teeth and tend to lift during the push stroke. It will probably cut better with the teeth pointed toward the motor
ножовкой быстрее чем этой чудной машиной.
болгаркой не всегда можно трубу или профиль отпилить ровно, а эта "чудо машина" с этим справится, но надо всё таки смазки добавлять, и не жалеть
Excelente
Xem đầu a ơi 🤣
CÁM ƠN BẠN
I think you should show that you have discharged the capacitor properly. I worry every time people are holding them incorrectly. Please and thank you :)
У нас это называется "выкрасить и выбросить".
Lâu lắm rồi mới thấy bạn ra video
đợt tới mình làm liên lục hi vọng có nhiều video đăng
The bar you were holding, would that be for putting weights on to give more or less force to the cut?
Vai Corinthians!!!!!
Be very carefull and use protection (face mask, gloves) when removing paint from old machines and ba wary to remove any dust. It was very usual in old times to use lead based paints, especially base paints. Lead is extremely dangerous and it is poison. I advise you to use some kind of chemical paint remover and not brush wheel.
well said.
TAHANKIOU IRMANO
👍
which beach or mud pit did you find this in?
to much dusting