Great job, I have been watching most of your video, it's okay, But try and tell us the name and what kind of chemical solution you are using, You don't need to talk but just write it on the screen. Once again good job 👍 Great job
Please wear safety glasses when using grinders. It only takes one spark of hot metal to injure your eye. We want you to be healthy so you can keep making these restoration videos. 🔧🔨🔩 🇺🇲
Really important. A classmate of me (we were 13-14 y/o) lost his left eye working with metal. And our craftsman teacher lectured both classes how to do the work properly the very next day.
A guy the older day was using a 4” cut off disc at work and it broke off and hit him right in his neck. Barely missed his jugular. The Older I get I realize how important PPE is.
I fully realize that this young man is working with what he has, regardless of that drawback, he sure needs to be given a lesson in both the removal and the installation of sealed bearings and the shafts that they are installed on. (i.e. take-away his hammer) He also seriously needs a lesson in the need to protect our earths' environment, all those chemicals he uses, the removed debris, the painting, disgarded waste, etc. which he is shown hosing down the drain or into the surrounding ground is eventually going to be something that the world will have to deal with if there is to be a future for the following generations of people.
Well... look at his sockets - 2 pins, round/flat blade, he doesn’t have a ground/earth connection for the electrical system in his house/bungalow - in a third world country, given his appearance - Oriental, south-east Asia/lower Orient, where electrical safety is non existent,
@@samuelfellows6923 If there isn't an earth ground prong, it should be double insulated. That is where one prong is wider than the other so the polarity can't be reversed, making it unsafe. (the wider prong is the neutral) also one side of the cord is square and one is round.
Wow, those bearings won't last long after beating them with a hammer like that. I never saw anyone use a lamp cord for a power cord on a tool. If you can afford new bearings, you can certainly afford a new cord.
22:43 Rubber cap between metallic case and cables missing. Vibration and you could get problem with contact between one cable and metalic case, lethal shock if you are unlucky. The lamp cord is probably a minor issue in the long run. Great job anyway :)
When the butter knife came out, you got a new subscriber! I thought I was the only one using a butter knife as my go to all purpose tool! Awesome job on the restoration.
Из мусора сделал вещь, молодец! Однако: 1. Станину и защитный кожух стоило загрунтовать, иначе краска судет слезать как и старая. 2. Подшипники ТАК не ставят (не забивают по обеим обоймам) - ходить долго не будут. 3. Не показал, как проверил якорь на межвитковое - коллектор-то синий, хоть и ламели вроде не выгоревшие. Статор сгорел, а якорь выжил - немного странно. В целом на твердую 4-ку работа тянет смело!
I find it mildly interesting that you have a grinder, multi tool...... ALL these tools..... but yet you scraped paint and rust with a butter knife and not a wire brush. Im going to add that tool in my garage. Good work buddy. I wasnt making fun of you or anything. It just caught my attention.
hello here from holand i like your vidios it help me to to beat the corona i dont have it but iam sitting home tru corona mij work has stopt i workt as a plummer
Seu trabalho, apesar de ser praticamente manual, sem utilização de ferramentas modernas, sofisticadas, apresenta um resultado muito satisfatório. Parabéns, meu amigo!👍🇧🇷
Very nicely done . The rust you had to remove reminded me of the one thing l had a hard time getting used to in Viet Nam , the extreme humidity, that and being shot at .😁 Have you tried electrolysis for rust removal ? The color of the metal that came out of the liquid, looked like it may have been an acid bath . If used in an open area electrolysis may be safer .
Please wear glasses. I have had one eye for 50 years. Kinda like missing half my life for a half century. You have a tremendous talent, skill, and luck;-)
Leave your comments so we can do better in the following video
Excellent job, superb skills!
Well done, mate. 👍👍👍👍🇦🇺🇦🇺🇦🇺🇦🇺
Great job, I have been watching most of your video, it's okay,
But try and tell us the name and what kind of chemical solution you are using,
You don't need to talk but just write it on the screen. Once again good job 👍 Great job
Nice work
@@vintagemachineworks o
Love the scorch mark on the wall at the end.
Same here! XD First off no goggles or face gear, and second a lamp cord and then he has a wall to restore?? LOL
Me gustan tus videos eres muy bueno
Nice work. Good for another generation.
Wow its very very dirty and rusty......i like this proces clean with hammer......👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Very. Nice 👍. Work. U. All. Do. Not. Like. U. Do. Have. A. Lake. Them. Go. Jump. In. It. Very. Nice 👍. Work. Brother. Lee
nice work, bro...
Metal is a nice meal
Please wear safety glasses when using grinders. It only takes one spark of hot metal to injure your eye. We want you to be healthy so you can keep making these restoration videos. 🔧🔨🔩 🇺🇲
Really important. A classmate of me (we were 13-14 y/o) lost his left eye working with metal. And our craftsman teacher lectured both classes how to do the work properly the very next day.
A guy the older day was using a 4” cut off disc at work and it broke off and hit him right in his neck. Barely missed his jugular. The Older I get I realize how important PPE is.
Leave your comments so we can do better in the following video
Totally agree with your comment , 👍
yes that's right, take care of the safety in your work
saya suka video ini .suara mesin grindanya berkaratnya dan durasinya cocok 👍👍👍
Hey, at least you didn't pretend to find it in the middle of a field covered up with leaves and mud! LOL
Is there someone that did that?? Lol
@@7jsoto yah this guy. walking in some random scrap metal & tall grass, he lifts up a mattress and voila - an old but complete air compressor
and repairing it with that magical toothbrush too😂😂
PARABENS FICOU NOVA NOTA 1000
You know, a wire wheel on an angle grinder is almost just as satisfying as watching some sandblasting! good work!
I fully realize that this young man is working with what he has, regardless of that drawback, he sure needs to be given a lesson in both the removal and the installation of sealed bearings and the shafts that they are installed on. (i.e. take-away his hammer) He also seriously needs a lesson in the need to protect our earths' environment, all those chemicals he uses, the removed debris, the painting, disgarded waste, etc. which he is shown hosing down the drain or into the surrounding ground is eventually going to be something that the world will have to deal with if there is to be a future for the following generations of people.
phục hồi lại như mới rồi
The electrical cord should be industrial quality not a lamp cord.
That would definitely be improvment #1
Well... look at his sockets - 2 pins, round/flat blade, he doesn’t have a ground/earth connection for the electrical system in his house/bungalow - in a third world country, given his appearance - Oriental, south-east Asia/lower Orient, where electrical safety is non existent,
Samuel Fellows here in europe we think in the usa electrical safety is non existent
@@samuelfellows6923 If there isn't an earth ground prong, it should be double insulated. That is where one prong is wider than the other so the polarity can't be reversed, making it unsafe. (the wider prong is the neutral) also one side of the cord is square and one is round.
@@samuelfellows6923 At least he has a bench. Most of them like working on the floor!
Thats amazing !!!!
Great job buddy 👍
Congratulations! Great work! 😊🙂👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏🙂
Fantastic demonstration at the end. Nice.
Очень хорошо!
يجب ان تقوم بتجديد محركات السيارات القديمة .
انت موهوب جدا .
ستكسب اموال كثيرة من تجديد المحركات الديزل
I love it when the acid comes out.And what a great job it did.
thank you
Wow, those bearings won't last long after beating them with a hammer like that. I never saw anyone use a lamp cord for a power cord on a tool. If you can afford new bearings, you can certainly afford a new cord.
You had me at hammering the shit outta those bearings! ROTFFLMAO
What a great job! you are good. I am sure you good at anything and everything you do thank you.
Brilliantly done.
Me hice fan tuyo desde argentina saludos
Very nice.
Voltou a vida , e de volta ao trabalho.
Wow, great job!
That was really good. Even the spring came out good.
At 8:55 into the program something went flying past you in the sound. It was so funny that I had to keep rewinding it. Thank you
Excellent restoration and video, thank you for sharing. 👍👍👍👍👍
Bravo 👍👍👍👍👍👍🌹🌹🌹👍👍👍👍🌹🌹🌹🌹
very good man 👍☺️
Очень хорошо . Very good.
This guy fix everything like brand new all rusty it's take men power soaked heavy equipment 2020 century technical stuff bless you friend
Can't use lamp cord on a power saw
You did an amazing job!
These resto's just relax me. & these fellows are talented.
Wow, well done sir ! Thanks for sharing.
22:43 Rubber cap between metallic case and cables missing.
Vibration and you could get problem with contact between one cable and metalic case, lethal shock if you are unlucky.
The lamp cord is probably a minor issue in the long run.
Great job anyway :)
When the butter knife came out, you got a new subscriber! I thought I was the only one using a butter knife as my go to all purpose tool! Awesome job on the restoration.
Bom trabalho gostei
Огромное уважение мастеру
👍👍👍👍👍👍👍👍👍👍👍👍👍
Судя по звукам жить этому инструменту не долго!
Молодец мастер золотые руки !!!!!
Very nice job 👍
Pleasure to watch you work again, great job as always . All the best Steve from England. 👍
Todo iba bien hasta la pintura pésimo trabajo en la pintura , el no hay detalle en el terminado pintura el cable muy sucio
Nice cord.
Из мусора сделал вещь, молодец!
Однако:
1. Станину и защитный кожух стоило загрунтовать, иначе краска судет слезать как и старая.
2. Подшипники ТАК не ставят (не забивают по обеим обоймам) - ходить долго не будут.
3. Не показал, как проверил якорь на межвитковое - коллектор-то синий, хоть и ламели вроде не выгоревшие. Статор сгорел, а якорь выжил - немного странно.
В целом на твердую 4-ку работа тянет смело!
Awesome,👌👌
Good too see you back were you been I like watching your restorations
Muy buenos videos te felicito
nice restoration until the lamp cord came out to power the saw, otherwise nicely done!
Yeah I don't think the power cord will be strong enough to hold up
That might be the best he had at the time to work with .. We are spoiled here in the states as we have everything at our disposal...
Молодец парень!!!
Superb video and your hard work bro....
I love your work......
I'm proud of you my brother
You need to get a bearing press. As for the restoration, you did a great job.
nice weekend my friend!
Super tare
Great Jop Thank You
Beautiful job! Maybe if you can afford a sandblaster, all your polishing process will be easier. Happy New Year!!
great restoration
This was a lot of work but you saved this item! Great Job, I enjoyed your video and subscribed!
#CoolRestorations 😍😍😍
Congratulations💪🏻🇧🇷
I find it mildly interesting that you have a grinder, multi tool...... ALL these tools..... but yet you scraped paint and rust with a butter knife and not a wire brush. Im going to add that tool in my garage. Good work buddy. I wasnt making fun of you or anything. It just caught my attention.
Amazing work, you're very talented!
That butter knife saved the day!
hello here from holand i like your vidios it help me to to beat the corona i dont have it but iam sitting home tru corona mij work has stopt i workt as a plummer
Eye protection please, Safety guard on saw as well, and fire extinguisher for the wall, but good video thanks
v.good job great
Another great job 👍
Well great job ! I only saw one thing wrong. The gauge on the electrical cord is too small, it needs to be a 10 gauge to handle the amps.
12:49 wow. Which solution u put to remove rust from the parts
Parabéns voceis sãos muitos inteligentes
Eu...06...07...2020
🤝🇧🇷
Seu trabalho, apesar de ser praticamente manual, sem utilização de ferramentas modernas, sofisticadas, apresenta um resultado muito satisfatório.
Parabéns, meu amigo!👍🇧🇷
Молодец Всё чётко.
Great job.
Great video learned a lot from this excellent content.
Great job.... not a fan of the LAMP cord used to power a 10A motor. should find some 14ga SO cord.
Vào bạc đạn thì lấy búa gỗ mà gỏ, ông lấy búa đóng đinh gõ lã đầu cốt hết 🤣
Great sir
Cool. Well done!
Good effort, but you need to invest in a small sand blaster. Would make a big difference to the finish of your parts....
12:50 What kind of anti rust liquid did you use?
Excellent job! But the power wire looks a little thin it might get hot easily.
Waw done very beautiful and very hard work 💪👊 brother, well done, God bless you, jaskaran Singh from UK.
It's wow* get your spellings right!
@@The_Beast_666 thanks correct me.
Very nicely done . The rust you had to remove reminded me of the one thing l had a hard time getting used to in Viet Nam , the extreme humidity, that and being shot at .😁 Have you tried electrolysis for rust removal ? The color of the metal that came out of the liquid, looked like it may have been an acid bath . If used in an open area electrolysis may be safer .
We can do it in the next video
@@restorationscrap8829 na
@@restorationscrap8829 what acid you used?
Good Job. What is the rust remover your using, cleans very well. Thanks for your video.
good job!
ok I'm 10 minutes into the video and I'm thinking, get a sand blaster!!!!!this is total crazy!!!!
Pro tip: If you want to keep your eyes, wear goggles when using a grinder.
ROTFFLMAO
He's Asiatic. No need of glasses. They should wear facial mask for not spreading shits like covid
@@emilianocaro you sound Brazilian, so you can't really complain.
Please wear glasses. I have had one eye for 50 years. Kinda like missing half my life for a half century. You have a tremendous talent, skill, and luck;-)
Top primeiro a ver o vídeo
thank you
nice yar restartion or fiting
Parabéns ficou muito bonita
very good
thank you chiu chiu
@@restorationscrap8829 😂😂
Bom trabalho
Trabalho lindo perfeito parabéns.