This worked flawlessly for my 2015 Dodge Ram. Also if you buy the pack of 10. The license plate lights are the same size bulbs. Might as well replace those too for an awesome look!
Excellent video! After a year of flickering map lights in my 14 Ram I finally replaced mine and it couldn’t have been easier. Thanks a ton for posting this 👊🏻
Good sir that's brilliant! I've been fighting with my dome lights for weeks now and never thought to do this. THAT is thinking outside the box! Thank you!
THANK YOU!!!!! I got so damn frustrated over a small piece of glass that I was going to just use a hammer and vice grips. Great review as well . Respect and thanks again Bro !
So far, 49 shops dislike due to the simple fact that they can’t charge $200.00 to replace a $1.10 light bulb lmao! Thanks for posting this it’s going to be very helpful! Cheers!
Dude, spot on with the zip tie... couldn't figure out how to pull the bulbs and scared to crush them using pliers etc. You just made a hard job extremely easy. Thank you!
Thank you very much bro I finally ordered those LED bulbs from the link of the description and they came already I can't wait to install those in my dad's Dodge Ram thank you very much
DUDE THANK YOU!!! Ive been dealing with 2 yellow bulbs in the front and white everywhere else and it has been driving me insane because i couldnt get those damn map bulbs out!! Going to continue on the video and link your channel in the description!! Thanks again man!
realjessewolfe well.....it ended up not working for me. I tightened the zip tie on as tight as I could and it just slipped off everytime so I took it to the dealer and made them do it :) they used small needle nose pliers with a rag covering them to get them out without breaking. regardless. I have all white lights now and I'm stoked.
Thank you so much for uploading this video bro I just ordered the lights and I got them from the link from your description I can't wait to install those on my Dodge Ram
Thanks for posting this. I just bought a 2014 Ram 3500 a couple of weeks ago and one of the bulbs is not working. I had no idea how to get into them until I saw this.
No problem! It drove me nuts too, I seriously cannot understand how you are "Suppose" to get these out. I guess they have bulb pliers? This was easy and cheap lol
Nice !!!! Great idea been trying to get mine out . Freaking impossible!!!! That’s why I check out you tube. Someone does something you didn’t think of. Great idea!!
Oh dude!....I was searching for this tutorial from several hours, to remove bulb from my Suzuki Baleno. I tried the pull through my fingers, but it wasn't work out. In an another video for Baleno, A guy use screw driver to remove the bulb. But i think, this is not a good idea to use metal stuff on electrical sockets. Now im going to try your idea :)
Wow man I feel like you dumbed it down for me just right thank you so much!! Edit: you linked the wrong ones, those are the 6th gen lights not the 5th!
most models come with a cylinder type bulb now. my 2006 does. Also, the only reason that whole console should be removed is for the little popper thinkgy if it stops working. To remove it, you do what he did to take the covers off and there should be a star screw on each side that once removed, will allow access to the inside.
I like the bulb removal trick. With the LED does it allow for it to dim as the incandescent does as it counts down to no light at all? Any trouble with the system rejecting the bulb as a faulty bulb? Thanks
Awesome idea with the zip tie. Ok, How to you fix the push button that turns the light on? When I was trying to remove the lens that button disappeared it fell somewhere, now the light doesn't work.
Quick question - I was able to replace the bulbs with LED on the dome lights (left and right). The right one was working then it stopped working when I put the plastic clear button back and now I can't get it to work. Could it be the fuse? I have a 2018 Ram 4th generation 5.7 - I have no clue which fuse that would be if it is the fuse. Thanks for any help
www.ebay.com/itm/Sylvania-ZEVO-1-Pack-578LED-LED-Bulb-Courtesy-Dome-Map-Trunk-Cargo-Area-cm/302043506146?hash=item46533225e2:g:kwoAAOSwV0RXsj8-&vxp=mtr It The lens pops out from the driver side. Then the bulb is just a festoon bulb, easy to remove and replace. I listed above the light I used and was very pleased with.
yooo i bought a license plate LEDs that only came with 2 LEDs for 9.99 and this whole pack the same quality but with 10 LEDs for the same price😱 bought these quick and made that return😳
hahahahahaha,,Five ,,***** STARS for you bro....I mean most uploaders have stated to take out the whole assembly...but the best and effort-less is ZIP-tie technique. I think you deserve an interview with Elon Musk. Thanks a million, Sir.
Did you use yorkim for rear dome too? I put the same ones in front and bought a 578 led bulb at Walmart but way to small. Want to make sure before I order some on amazon
Would you Mind sharing what model of truck do you have? I have a 2014 RAM 3500 Laramine Longhorn and comes with non replaceable amber leds that sucks !!’ I would love to change the lamp some assemble for yours just to be able to have daylight LEDS. Thanks
According to site on Amazon, uou can see if these will fit your vehicle. They do not fit my 2014 Dodge Ram 3500 Laramie. Do you have another suggestion for ones that would fit?
I broke my plastic cover on the light what is it called so I can get a new one? I broke off the tab part so the spring won’t turn in the light help lol
Just got a 2014 ram and interiors are super dim.... so do these led lights last long? I changed all the interiors on my old ridge line and they died constantly
This worked flawlessly for my 2015 Dodge Ram. Also if you buy the pack of 10. The license plate lights are the same size bulbs. Might as well replace those too for an awesome look!
Excellent video! After a year of flickering map lights in my 14 Ram I finally replaced mine and it couldn’t have been easier. Thanks a ton for posting this 👊🏻
Good sir that's brilliant! I've been fighting with my dome lights for weeks now and never thought to do this. THAT is thinking outside the box! Thank you!
Listen, I wanted these bulbs to work lol. I was going to find a way!
THANK YOU!!!!! I got so damn frustrated over a small piece of glass that I was going to just use a hammer and vice grips. Great review as well . Respect and thanks again Bro !
LOL that sounds sketchy - I started using pliars then decided to change that idea.
So far, 49 shops dislike due to the simple fact that they can’t charge $200.00 to replace a $1.10 light bulb lmao! Thanks for posting this it’s going to be very helpful! Cheers!
Dude, spot on with the zip tie... couldn't figure out how to pull the bulbs and scared to crush them using pliers etc. You just made a hard job extremely easy. Thank you!
Man u r a life saver! Couldn't get the rubber band to work. Zip ties! Genius!! Thanks a mil for saving me from pulling the rest of my hair out! 🤣🤣
lol I feel ya on that one!
Thanks for the video. I used a piece of strong tape to pull the bulbs, worked perfectly on cold bulbs.
No Problem! Yeah the tape would not stick long enough.
I'm picturing a bunch of big boys with sausage fingers that have to use a Homer Simpson wand to dial 911, lol!
This worked like a charm! I also had bulbs left from a set for the plates and bed and they fit perfectly. Thanks for sharing!
Glad it helped! so simple yet effective!
Great tutorial! explained step by step without editing the video like most do when they run into a problem.
Man! You helped me save a ton of time and frustration! I did it EXACTLY like you said, and worked perfectly. Thanks so much for the video!!!
Thank you very much bro I finally ordered those LED bulbs from the link of the description and they came already I can't wait to install those in my dad's Dodge Ram thank you very much
LOL you are welcome. Glad I could help ya out. These things were a bear!
DUDE THANK YOU!!! Ive been dealing with 2 yellow bulbs in the front and white everywhere else and it has been driving me insane because i couldnt get those damn map bulbs out!! Going to continue on the video and link your channel in the description!! Thanks again man!
Hahahahahaha I did the same, thats why I got pissed and made a video lol. Thank you for the link!!
realjessewolfe well.....it ended up not working for me. I tightened the zip tie on as tight as I could and it just slipped off everytime so I took it to the dealer and made them do it :) they used small needle nose pliers with a rag covering them to get them out without breaking. regardless. I have all white lights now and I'm stoked.
Wow everything I was reading was to replace whole top assembly. Thank you so much.
Thanks for this video. I have 2 to replace in my wife's 2014 RAM Laramie and this solved the question I had.
Is it the exact same process in a Laramie? My (European) model has one dome light that flickers like crazy but I'm not sure if it's the same?
Awesome! Glad to help!
Watched this video as I attempted to pull them out with a plastic piece pry tool and it worked very well! Looks like a fork shape tool
Thank you so much for uploading this video bro I just ordered the lights and I got them from the link from your description I can't wait to install those on my Dodge Ram
No problem! Thanks for taking the time to watch and glad it helped!
You are awesome, I couldn’t figure out for the life of me how to get that out, thank you, thank you, thank you 👍
LOL thank you! Just had to get a little more creative because I was scared of breaking the bulb in the dang socket.
Thanks man! I watched your video and swapped the Map bulbs out for LEDs in less that 10 minutes on my 2018 RAM!
Thanks for posting this. I just bought a 2014 Ram 3500 a couple of weeks ago and one of the bulbs is not working. I had no idea how to get into them until I saw this.
No problem! It drove me nuts too, I seriously cannot understand how you are "Suppose" to get these out. I guess they have bulb pliers? This was easy and cheap lol
You're a damn genius sir! Zip tie, never thought of that tbh.
Awesome advice with the zip ties worked purfect...LED's work purfect
Lifesaver! This trick worked perfectly!
Nice !!!! Great idea been trying to get mine out . Freaking impossible!!!! That’s why I check out you tube. Someone does something you didn’t think of. Great idea!!
To help out you also can use the zip ties as a gripper and take out the bulb with needle nose pliers so the pliers have something to hold on to
Great video! simple and easy...thanks to your tips and instructions. Same procedures and bulbs fit my 2015 2500.
Awesome dude! Glad it worked
Thank you for the video. It was much needed! You're the man!
No problem brother! Glad to help lol
You are awsome. Thanks for the zip tie tip. I have had some customers come in with that same bulb issue.
Dude, this is clutch. Almost destroyed my ceiling for those bulbs.
Same lol I almost just traded the truck in!
Thanks man!!! I just bought a set. You saved me a big headache. Lol
Oh dude!....I was searching for this tutorial from several hours, to remove bulb from my Suzuki Baleno. I tried the pull through my fingers, but it wasn't work out. In an another video for Baleno, A guy use screw driver to remove the bulb. But i think, this is not a good idea to use metal stuff on electrical sockets. Now im going to try your idea :)
LOL listen. I was in the same boat. I tried tape and made a messsssss.
You, sir, are a genius 👏
Exactly I just knocked it out in 5 minutes followed his example step by step. Thanks realjessewolf
Thank you, Jesse! Very easy to follow. You da man.
No problem Scott!
Perfect! Followed your lead exactly, it worked! Thank you!
Wow man I feel like you dumbed it down for me just right thank you so much!!
Edit: you linked the wrong ones, those are the 6th gen lights not the 5th!
No problem brother! Glad I could help!
most models come with a cylinder type bulb now. my 2006 does. Also, the only reason that whole console should be removed is for the little popper thinkgy if it stops working. To remove it, you do what he did to take the covers off and there should be a star screw on each side that once removed, will allow access to the inside.
Awesome idea !! Had it done in 5 min!! Thanks for the video brother !!
Anytime!!
Do you know if the map lights will come out the same way in a 2018 ram 1500 bighorn? I dont want to try and pry them out like you did and break them.
Should be identical I believe. Just use a non-marring pry tool and go slow!
Thanks bruh that shit was mad easy I was about to give up on changing them out..
LOL same. But I really really wanted these lights to work lol.
I like the bulb removal trick. With the LED does it allow for it to dim as the incandescent does as it counts down to no light at all? Any trouble with the system rejecting the bulb as a faulty bulb? Thanks
Excellent video, very well done.
Awesome idea with the zip tie.
Ok, How to you fix the push button that turns the light on? When I was trying to remove the lens that button disappeared it fell somewhere, now the light doesn't work.
Hmmmm thats a great question. I wonder if the spring might have popped out? I know its tucked pretty deep on one corner
Same thing happened to me
I used a flat style phone charge cable and a pinch to grab the bulb. Thanks
Smart!!!!
Bread ties worked perfectly for me
Quick question - I was able to replace the bulbs with LED on the dome lights (left and right). The right one was working then it stopped working when I put the plastic clear button back and now I can't get it to work. Could it be the fuse? I have a 2018 Ram 4th generation 5.7 - I have no clue which fuse that would be if it is the fuse. Thanks for any help
I’m struggling using zip ties but for you just comes right out
Thanks the zip tie trick works great
Hey man great video thanks for all the info used your method and swapped out the lights with ease. Glad I came across this💯🤙😎...
Do you have a video that shows on how to replace the one in the back of the cab?
awsome DIY vid. how about the light above there rear seats?
www.ebay.com/itm/Sylvania-ZEVO-1-Pack-578LED-LED-Bulb-Courtesy-Dome-Map-Trunk-Cargo-Area-cm/302043506146?hash=item46533225e2:g:kwoAAOSwV0RXsj8-&vxp=mtr
It The lens pops out from the driver side. Then the bulb is just a festoon bulb, easy to remove and replace. I listed above the light I used and was very pleased with.
No but I should have done one lol
Does your truck have the small light that lights up the cup holders
Thanks for the video I tried a 578 LED bulb in the rear light and it was to loose. Any suggestions? Thanks
I had the same problem- they do vary a little by brand. I also just squeeze the prongs closer together with pliars
Bro liked your video,where else in the truck can I use these bulbs ?
yooo i bought a license plate LEDs that only came with 2 LEDs for 9.99 and this whole pack the same quality but with 10 LEDs for the same price😱 bought these quick and made that return😳
LOL save that money son! More parts then!
hahahahahaha,,Five ,,***** STARS for you bro....I mean most uploaders have stated to take out the whole assembly...but the best and effort-less is ZIP-tie technique. I think you deserve an interview with Elon Musk. Thanks a million, Sir.
How about needle nose pliers? Worked forme!
Congrats , you are the best ! 👍
Did you use yorkim for rear dome too? I put the same ones in front and bought a 578 led bulb at Walmart but way to small. Want to make sure before I order some on amazon
Yes I did and it was AWESOMELY bright. Bought a new ram and need to swap the bulbs now.
Thanks for the tutorial and the link!
No problem! I know the pain of these things
Dood awesome trick with zip tie👍
No problem! Glad it worked!
did you change the globe light as well? if so which type of bulb did u use?
I did not
Do they work for every interior light? And why when I click on the link it shows me a different pack is it the same ones?
Would you Mind sharing what model of truck do you have? I have a 2014 RAM 3500 Laramine Longhorn and comes with non replaceable amber leds that sucks !!’ I would love to change the lamp some assemble for yours just to be able to have daylight LEDS. Thanks
What happens if the plastic cover breaks like mine did?
Glue. Or just snag a new one off ebay
Your are a genius
It worked perfect
That's a good trick. Thanks for the video.
I used a small pair of channel locks. Took 30 seconds to remove and replace those bulbs with LED's.
lol you are a braveeeeee man. I was too scared.
According to site on Amazon, uou can see if these will fit your vehicle. They do not fit my 2014 Dodge Ram 3500 Laramie. Do you have another suggestion for ones that would fit?
looking for my 2014 3500 Laramie as well, did you find something that worked?
@dman6377 I found something at Auto Zone, but one side still does not work. Still looking... Was ridiculously hard to get out.
DO THOSE BULBS WORK IN THE BACK FIXURE AS WELL ?????
Where can I order a new clear plastic hinged piece ?
Is the back interior lights T10s also?
no its a festoon light
on the map lights do you pry them out in the same place on both sides or are they a left and right ?
Thanks brother you made my day!!!!!!!
Man... THANK YOUUUUU...... Heck of a video !!!!
You thanks Paul!!
Hey buddy, I was wondering if these bulb give u any error message, I want to buy them but want to know first cheers
Nope! Not one single error and they worked awesome!
Really helpful video thanks!!🤙
Omg Bro so helpful man I have a 2007 Buick Lucerne and it was a pain...... thanks Bro
Yo- this trick has worked on a few other car adventures as well. LOL glad it helped !
Ok so what happens if the one side doesn’t work, even the original bulb???
Thats weird. Check the fuse and then it might be the housing if not the fuse.
Do those bulbs come in red? I work overnite and white light messes with eyes
Is it the same bulb for the rear?
I’m gonna try this on a 2020 ram 1500. Hopefully it works. I don’t wanna pull the console.
How u change the top glove compartment light ?
Thank you
Not sure- that would be another epic video!
Will these bulbs work in the dome light?
different bulb I believe
Thank you so much man! Damn bulbs couldn't figure out how to take them out I had the same problem couldn't find a rubber band lol
COULD not get a rubber band to work. lol this was faster
What bulb did you use for the back? Auto zone's website says that the 32 MM isnt compatible ams my old 32 MM seems to fall out.
My lights hadn’t been working so I purchased the lights u recommended and they still didn’t work. Anyone know if there is a fuse for this area?
Newer trucks are directional. Try reversing the bulb. If not it's probably a wiring issue.
LEDs ony function with current flow in one direction. So, yes turn 180 degrees. Should work fine.
Hey Jess' what about the rear dome light...? got a Led part number for it.?
4410 led
Fuse puller works great
Dang! Another great idea
Thank you man for this video
Anytime!
Awesome video! Thanks bro!
I broke my plastic cover on the light what is it called so I can get a new one? I broke off the tab part so the spring won’t turn in the light help lol
Dislikes came from people that snapped their shit up, then TH-cam recommended this video.
Just got a 2014 ram and interiors are super dim.... so do these led lights last long? I changed all the interiors on my old ridge line and they died constantly
dude you are da man! i just got my 2018 rebel and these small halogen are really hideous lol
A: bad ass truck- I want one. B: they are the most yellow gross light bulbs
How you get the bulb out the rear Dom
What size of bulb goes in the rear light that's in the cab ?
Works great, thanks! Good video.
Thank you for posting!!
Anytime Sid
Will the t 10 work for dome.light
Video was great! Thank you!