3:45 this is the PowerJet. Basically, at high RPM fuel climbs up this small pink hose and gets sprayed directly into the air intake. My OKO PWK26 has it too. The screw allows you to adjust how much fuel you want to be sprayed. For me it works just as fine without the PowerJet.
Is the jet supposed to move when it’s in place or stay locked in because I can slide mine out and my bike works fine I’m just tuning because it bogs at 2 gear and is fine after that
Good deal bro 👍👍👍... I have 2 of these that work flawlessly... I'm going to install one of these on my YD 100...and the other one is on my phantom 85.... Very good carburetor for the price
With my experience with them they actually run really good haven’t had for a long time but a few months minor tuning and it runs amazing especially for 35$
When I got mine I felt like it was better quality than a mikuni or dellorto. Better case comes with extra an extra needle and two extra jets. I just go a 21 mm for a 70 cc. I almost went with a 19 but I like bigger carbs. But for a 70 cc it should be perfect might loose a little gas efficiency but ill top out at 63 65 mph on my kitted moped
@@skiivisualz5700 mine was surprisingly good, but it is kind of a hit or miss with these. Its not the best for fine tuning, i always just had it set a little rich just to be safe. If you have a high revving engine with high end racing parts honestly buy a real carburettor.
@@jeffrey5582 ahhhhh, i just ordered this today to try it out. I have the mhr replica 70cc with yasuni r and italkit inner rotor Phbg 21mm. Will order an official carburetor this week from maxi scoot. I was also thinking it's about your luck with these
@@jeffrey5582 not true, its easy to fine tune it but u gotta know how to do it. you got enough jets for it. powerjet for high rpm’s. gas needle height. air screw. and there are enough videos on yt how to tune them. i learned it by my self because Tuning is my hobby and job aswel.
Well I was surprised to find this video I've been looking at these carburetors also I have an Ice Bear champion 125cc it's a CT70 clone You probably know what I'm talking about what size carburetor do you think I should go with? I don't want to overcarborate.24mm or 26mm?
Never buy one of these Maikuni brand carburetors and especially the black model. The paint of the black one is not even fuel proof and comes off in your fuel bowl like plastic film and blocks up everything but also there is no spare parts for these carbs and as they are copied of a branded carb the internal sizes are not the same and other brands do not fit so steer clear of this brand.
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
3:45 this is the PowerJet. Basically, at high RPM fuel climbs up this small pink hose and gets sprayed directly into the air intake. My OKO PWK26 has it too. The screw allows you to adjust how much fuel you want to be sprayed. For me it works just as fine without the PowerJet.
Is the jet supposed to move when it’s in place or stay locked in because I can slide mine out and my bike works fine I’m just tuning because it bogs at 2 gear and is fine after that
Good deal bro 👍👍👍... I have 2 of these that work flawlessly... I'm going to install one of these on my YD 100...and the other one is on my phantom 85.... Very good carburetor for the price
You've been running it on your phantom 85 how good and what type of speed
Damn mine had a small dent in the meteal box but yours looked like they played soccer with it
it sure did lol
Lol
With my experience with them they actually run really good haven’t had for a long time but a few months minor tuning and it runs amazing especially for 35$
Any updates on how it has held up after a year of use?
Good deal, tested 3:
2 24mm over a year and work fine
1 30mm also very good even for small tuning
Turned my minibike into a beast!
nise men
@@ewerxx8249 what jetting did you like best
I also build a pwk 21mm on my driving beerbox but it's way to rich.
After a while the paint in the inside melts a clogs the carb,after a year of good riding its crap but great for the price
All good biz you are rite them carbs are good and do the trick for the price brapp💯💯✌️
It's a boost jet... Dude
I was thinking of changing my dr200 carb out I'm thinking 32mm for it
When I got mine I felt like it was better quality than a mikuni or dellorto. Better case comes with extra an extra needle and two extra jets. I just go a 21 mm for a 70 cc. I almost went with a 19 but I like bigger carbs. But for a 70 cc it should be perfect might loose a little gas efficiency but ill top out at 63 65 mph on my kitted moped
How does it run? I just bought one for my 70cc Piaggio engine
@@jeffrey5582 how does yours run? just bought one for my Gilera runner 70cc engine
@@skiivisualz5700 mine was surprisingly good, but it is kind of a hit or miss with these. Its not the best for fine tuning, i always just had it set a little rich just to be safe. If you have a high revving engine with high end racing parts honestly buy a real carburettor.
@@jeffrey5582 ahhhhh, i just ordered this today to try it out. I have the mhr replica 70cc with yasuni r and italkit inner rotor
Phbg 21mm. Will order an official carburetor this week from maxi scoot. I was also thinking it's about your luck with these
@@jeffrey5582 not true, its easy to fine tune it but u gotta know how to do it. you got enough jets for it. powerjet for high rpm’s. gas needle height. air screw. and there are enough videos on yt how to tune them. i learned it by my self because Tuning is my hobby and job aswel.
Hey bro can you make an installation tutorial?
WHICH ONE OF THOSE GOLD NIBS TO I PLUG INTO GAS?? PLEASE HELP! THANK YOU!
I just got one to put on my qmb139 105cc scooter ..
I heard then run well..$20 dollars
YES THEY WORK GREAT
Well I was surprised to find this video I've been looking at these carburetors also I have an Ice Bear champion 125cc it's a CT70 clone You probably know what I'm talking about what size carburetor do you think I should go with? I don't want to overcarborate.24mm or 26mm?
What are the 2 extra fuel ports on top for?
drain hoses. yea 2 of them
That 45$ not bad lmaoooo 🤣
Would a 21mm work on a stock 50cc or is it overkill
I think it will work my pocket bike (50cc) also runs on a 21mm carb
does you ct70 have 2 fuel lines coming from it? like a main fuel line and a reserve line? if so, how do you attach it to the carb?
You're supposed to have a switch where the two lines will go into and then splits to one for the carb
@@BIZMOTO oh really? My old carb had the petcock on it instead of it being seperate
@@thijshuiberts2604 yes some carbs are built that way
Hello sir! Does it fit 26mm for 110cc motorcycle?
yes i think that would be fine
Any idea where to get installation instructions I have looked everywhere
Look to see if there's a TH-cam video?
It's a power jet
4:42😅😉
Does this fit on a Predator 212cc Engine?
I just ordered one ill let you know
@@jaymerrill2193 did it fit ?
@@jaymerrill2193 any word
it will fit with a manifold and boot
Update???
Never buy one of these Maikuni brand carburetors and especially the black model. The paint of the black one is not even fuel proof and comes off in your fuel bowl like plastic film and blocks up everything but also there is no spare parts for these carbs and as they are copied of a branded carb the internal sizes are not the same and other brands do not fit so steer clear of this brand.
never had a problem
@@BIZMOTO I guess you know nothing about these pieces.
Sir can v use this carb to Yamaha rxz 135cc 4speed bike ?
I’m have one on my 212cc engine so I’m sure you can as well
Does 32 or 34mm fit on 150cc
Get a 28mm 30 and higher is to big
@@fatboiwtf2948 but I use 30mm in my cylinder kit 150cc (piston 65.5)
Mine works great