Oh man excellent video! That truck looks just like an 80's Ford Ranger. For some reason the Landfreeder in stock paint doesn't look as realistic. You did a great job thanks for sharing!
This helped me it was nice and simple just in case y’all hold your button and just starts flashing green then try re connecting the receiver wires that’s what worked for me Thanks again God bless you!
This is helpful, but after following all the procedures, it still flashes red, and the vehicle wont move at all, it will go forward for about 2 seconds, then it wont move at all or turn off, i tryed these steps 4 times, still no use, if you have any tips or other advice that would be greatly appreciated
I know this is an old video now ( and an old esc ) but mine still works! A real testament to traxxas durability. Thanks for making this short and informative video. Helped me out of a pinch.
I am not able to get my controller to sync. After the first red flash, I pull the trigger, and then nothing happens. No double flash. Red light stays off, but the unit still has power because the wheels can rotate left and right and the green light is on with the receiver. Ideas?
Q- i just bought a new Velineon i followed you step by step i pressed full throttle to full after one flash lol but there was never a double flash to put it in reverse mode.i only got steering lol .what am i doing wrong guys?its my first time dealing with Lipo or Brushles system by the way.
Mine instantly goes green when I turn on, then red and then through the options no controller needed. But I hold to select speed but nothing changes, it keeps flashing
Great video! Am getting a futaba 2hr 2ch 2,4ghz radio to my rustler vxl soon. Can I program this radio to the receiver in my rustler or do I need to take the receiver out and replace it with the futaba receiver that comes along with the 2hr radio? I want to use both radios (orginal rustler radio and this) without having the hasle of switching the receivers every time
My stock slasher still doesn't go forwards. I've had this problem since I got it. I've swapped mottors and everything but forward works. No matter what I've done it still doesn't go forwards. Please help.
+eric englund I called tracxas support and they said it was a problem with the crystals and that I needed new ones. When I bought those it still didn't work and they said it was a problem with the esc and that I would have to ship it out to them so they could fix it. I've already swapped motors so I know it's not a problem but the motor on your car could be a problem. If not it's the esc.
On my Slash, it gets extremely slow after a bigger jump or crash, and it'll stay slow until I recalibrate my esc... Would anyone have any ideas as to why it does this? Poor battery connection maybe?
make sure it is in lipo mode, assuming it is try another battery, find one that you know works or borrow a friends that works fine. If you are having the same problem then its probably your esc. if not then its might be a dodgy battery.
This used to work for me. Now it doesn't anymore. Please help someone. Mine says: "NVIDIA GeForce Experience Something went wrong. Try rebooting your PC and then launch GeForce Experience. ERROR CODE: 0x0003 Yes, I did everything in this video correctly(I've done this many times to get it to work and it USED too.) Yes, I did reboot my PC as well like stated. So someone please help.
Thank you :) great help, though I could not help pulling a little smile when you said Esk, it's E-S-C as in spelling the letters and it means, Electronic System Controller, but thanks again for a helpfull guide :)
i Just blew out my Esc and Somehow my motor so i had to go buy new ones and this never happened till i got my new 3 cell traxxas 11.1V Battery TODAY the same day i blew out everything but heres the story i charged my battery when i got home and fully charged it but when i did it charge it to 3800Mah eventho its a 5000mah battery but they recharge a little so i plugged it in my rc car and it made it the biggest difference in the world (i have a stock Slash 4x4 no upgraded parts except the battery) it did wheelies and everything compared to the 2 cell batteries i had but after about 10-15 mins it stopped running but the servos still worked just turning left and right not forward or backward but the receiver box was blinking red?not the Esc so i tried looking it up and didn't find anything so i unplugged the battery and plugged it back in and it worked for another 7-12 mins until this time its was the esc not the receiver box blinking (Red) so i unplugged it and put it on the charger and it charged to 1700Mah? i thought it was dead because of the esc blinking not the receiver box. well so i put my 2 cell lipo on and as soon as i put it in the esc started to smoke a lot! i mean a lot so i unplugged it fast and then the car locked up and didnt move so i blew up my motor and my esc. plus the same day i tried out my 3 cell lipo and why did it charge to only 1700Mah? did i charge my lipo wrong the first time or something(Traxxas 3cell 5000Mah lipo)? can someone help me thank you.
I really dont care how you pronounced “e.s.c” this was just a very helpfull video, THANK YOU!
I’m going to call it an esk from now on! 😂😂😂😂
Oh man excellent video! That truck looks just like an 80's Ford Ranger. For some reason the Landfreeder in stock paint doesn't look as realistic. You did a great job thanks for sharing!
I do this on mine it works for a little bit then flashes red and stays the same problem
This helped me it was nice and simple just in case y’all hold your button and just starts flashing green then try re connecting the receiver wires that’s what worked for me
Thanks again God bless you!
I do this on mine it works for a little bit then flashes red and stays the same problem
This is helpful, but after following all the procedures, it still flashes red, and the vehicle wont move at all, it will go forward for about 2 seconds, then it wont move at all or turn off, i tryed these steps 4 times, still no use, if you have any tips or other advice that would be greatly appreciated
That was soooooo helpful! Thank you so much for posting that. It totally solved our problem.
Finaly one easy to understand and helpful video, thank you very much!!
I know this is an old video now ( and an old esc ) but mine still works! A real testament to traxxas durability. Thanks for making this short and informative video. Helped me out of a pinch.
I been looking for THIS for a week!!!
I am not able to get my controller to sync. After the first red flash, I pull the trigger, and then nothing happens. No double flash. Red light stays off, but the unit still has power because the wheels can rotate left and right and the green light is on with the receiver. Ideas?
Thank you so much man. Just threw it in my scx10 and was setup in reverse. So thank you well appreciated
Thank u man i was getting so mad at my traxxas slash because it was so slow and I just took it off training mode
Same
My to
This video was very helpful to me because I have been having some problems with it and this helped a lot.
Q- i just bought a new Velineon i followed you step by step i pressed full throttle to full after one flash lol but there was never a double flash to put it in reverse mode.i only got steering lol .what am i doing wrong guys?its my first time dealing with Lipo or Brushles system by the way.
What do I do when it cuts of ever 6seconds I reset esc and it’s stil cutting off on it’s own and judder problems
Great Video!!! Thanks for the info. ....and if u wanta call the E.S.C. an Esc who is anyone else to judge! again..... Great Video!!
Thank you so much this video answered all my questions.
Your the only video that helped me
THANK UUUUUU!!!!!!
Mine instantly goes green when I turn on, then red and then through the options no controller needed. But I hold to select speed but nothing changes, it keeps flashing
Thanks for the video!!!! Finally I got reverse back !!!!!
This was a massive help man ive been having troublw with my stampede 4x4 vxl and its now fixed thanks to you
This really helped I bought a 3s lipo and the rpms were not as high as I originally expected as well as the power and overall speed Thanks :)
Great video! Am getting a futaba 2hr 2ch 2,4ghz radio to my rustler vxl soon. Can I program this radio to the receiver in my rustler or do I need to take the receiver out and replace it with the futaba receiver that comes along with the 2hr radio? I want to use both radios (orginal rustler radio and this) without having the hasle of switching the receivers every time
Do you have to this this when you just got a new slash 2wd VXL right out of the box?
mine never flashed once or twice is it because i just bought a new remote it is just not flaming she i do all the steps
mine blinks red after i set it up for sport mode what do i do nxt?
Hi, I have a problem with my throttle (I have traxxas e-maxx) when accelerated slightly accelerates full ... regularly as I can? best regar
My stock slasher still doesn't go forwards. I've had this problem since I got it. I've swapped mottors and everything but forward works. No matter what I've done it still doesn't go forwards. Please help.
Rustler****
+Cole Robustelli I have the same problem
+eric englund I called tracxas support and they said it was a problem with the crystals and that I needed new ones. When I bought those it still didn't work and they said it was a problem with the esc and that I would have to ship it out to them so they could fix it. I've already swapped motors so I know it's not a problem but the motor on your car could be a problem. If not it's the esc.
same happened to me man, call traxxas and get a new esc. thats what it is
will this prevent it from burning up and start smoking
I followed everything you did but its still not working, I have a rustler vxl, any ideas .
Do you hear the humming my slash 4x4 is doing that after I turn the wheel?
+Stephen Saucerman It's supposed to do that. That's the car letting you know it's working.
My slash did not work brake.pls help
On my Slash, it gets extremely slow after a bigger jump or crash, and it'll stay slow until I recalibrate my esc... Would anyone have any ideas as to why it does this? Poor battery connection maybe?
Thank you! Saved me a lot of frustration.
Could you still stop on race mode ?
You won't damage the battery unless it falls below 3 volts and then you have problems charging it
Mine will turn but not go forward or back
LegitCatcher21 mine to
Thank you SO MUCH for posting this!
how dose it blink if u turn your esc off please answer i need help
Very short and sweet thank you!
What if it doesn't flash after it turns red?
Answered every question I needed 10/10
Why dosnt it beep on start up
Does the mode mean how fast it goes at full throttle?
What if it didn't program. Plz replay asap
Would my Traxxas be in training mode straight from the box
i don't think so. Mine were not
mine was in Sport Mode.
extremely helpful thank you 😊
Thank you it helped me thumbs up 😀👍🤘
thank for the post, i`m losing my mind trying to program the car!!
sorry for my english, i`m spanish
Thank you very much from Saudi Arabia :)
Very helpful and to the point thank you.
Thank you very clear and to the point
The light only flashes once what do I do?
Thanks for the quick help
help my car with a full battery life is going slower than the usual
Quality, clear video 👌
Thank you I was so frustrated with my car because if I lightly press the throttle it would start to go on it’s own. 👍🏻
it will cut off when it low voltage
sorry im not good in english
mine just keeps going between lipo and nimh
Best explanation thank you
Guys What Color Need To Be To Turn Off?
To turn off you just press and hold until the light turns off, then release immediately
Ill sibscribe, as long as you promise to say esC at least half a dozen times in all your videos.
The best way it just to go through the setup procedure again, I don't think you can reset it any other way.
Very easy to follow thanks well done.
Thankyou for the help G💯
Mine flash red once then never does a twice
Thanks that really helped keep up the good work
thank you for replying so quickly
make sure it is in lipo mode, assuming it is try another battery, find one that you know works or borrow a friends that works fine. If you are having the same problem then its probably your esc. if not then its might be a dodgy battery.
my car wont move so can u help me
flashing green light is a radio problem, you should check your radio gear or replace it if it's faulty
gmodertom
gmodertom
Thank you ;) from Belguim!
This used to work for me. Now it doesn't anymore.
Please help someone.
Mine says:
"NVIDIA GeForce Experience
Something went wrong.
Try rebooting your PC and then launch GeForce Experience.
ERROR CODE: 0x0003
Yes, I did everything in this video correctly(I've done this many times to get it to work and it USED too.)
Yes, I did reboot my PC as well like stated. So someone please help.
Thank you. Very helpful!
Thanks YOU so much this video its going on my favorites
THANKS FOR THE HOW TO VIDEO NOW MY RUSTLER VXL HAS BRAKES I LOVE RACE MODE.
thank you so much for posting this!!!
Thank you :) great help, though I could not help pulling a little smile when you said Esk, it's E-S-C as in spelling the letters and it means, Electronic System Controller, but thanks again for a helpfull guide :)
Electronic Speed control is the actual Name of the abbreviation.
Thank you. The best
Nice and simple, I like it
Thanks a lot that really help
Thank you my brother
Mine flashes as soon as I plug it in
Just got this
Thank you I didn't have to read lol
easy and simple Thank you gmodertom
Really helpful video ty
Tysm it was randomly on training mode and I thought my esc broke
THANK YOU SO MUCH!
Thanks for the help
Thanks for the help man.
thank god a great video
Help Me Please
Mine is just flashing red
Great help
you explained all thanks
i Just blew out my Esc and Somehow my motor so i had to go buy new ones and this never happened till i got my new 3 cell traxxas 11.1V Battery TODAY the same day i blew out everything but heres the story i charged my battery when i got home and fully charged it but when i did it charge it to 3800Mah eventho its a 5000mah battery but they recharge a little so i plugged it in my rc car and it made it the biggest difference in the world (i have a stock Slash 4x4 no upgraded parts except the battery) it did wheelies and everything compared to the 2 cell batteries i had but after about 10-15 mins it stopped running but the servos still worked just turning left and right not forward or backward but the receiver box was blinking red?not the Esc so i tried looking it up and didn't find anything so i unplugged the battery and plugged it back in and it worked for another 7-12 mins until this time its was the esc not the receiver box blinking (Red) so i unplugged it and put it on the charger and it charged to 1700Mah? i thought it was dead because of the esc blinking not the receiver box. well so i put my 2 cell lipo on and as soon as i put it in the esc started to smoke a lot! i mean a lot so i unplugged it fast and then the car locked up and didnt move so i blew up my motor and my esc. plus the same day i tried out my 3 cell lipo and why did it charge to only 1700Mah? did i charge my lipo wrong the first time or something(Traxxas 3cell 5000Mah lipo)? can someone help me thank you.
Good video thanks
Does anyone else pronounce it esc or is it e-s-c
thanks for the video
thank you so much