PawPaw Reviews and Demonstrates the Electric Starter Drill Bit for 2 cycle engines
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2020
- Thank you for supporting my channel DoingItCheap
Your monetary support is neither asked for nor expected, but if you feel moved to send a little something, Paypal me as a friend to
CallBobForSigns@yahoo.com
Thank you for your support. - บันเทิง
My sears trimmer is a 4 stroke that I bought probably 20 years ago and has that feature. It actually came with the tool. I love it
Pawpaw ya need to do us a video of you putting something on that Weber smokey mountain .love watching your videos
I'm an old lady and have been using these electric starts since they came out. Work great for me. I had a problem with holding the drill and the weedwacker at the same time so I bought a Harbor Freight right angle drill. (DON'T DO THAT CAUSE THAT drill only lasted 2 starts and the plastic gears snapped from the torque.) So I just went ahead and bought the $45 starter.
ALSO
I bought a starter at a garage sale for $2 and then found out the bit was stripped. FYI--THEY DON'T SELL A REBUILD KIT FOR THE BIT ON THOSE STARTERS.
Always great information from Paw Paw. Keep up the great videos and thanks for sharing your thoughts and experiences with us.
Thank you! Will do!
Great video pawpaw always enjoy watching your video have a great weekend
Paw Paw, thanks for that great little gadget on starting 2 cycle engines. Thanks for sharing and stay safe. Ken
Great little tool to have! Thanks PawPaw! 😊
I've got 3 string trimmers and a brush cutter, not a single one has the electric start option. But it looks like a wonderful idea hopefully more manufacturers pickup on! Thanks for the great review pawpaw👍
This by far is the best thing I've seen yet to start a mower I was thinking the same thing why can't my drill just start my mower and my weed eater. Thank you very awesome
It's even harder when you have a bad shoulder, Good video Paw Paw.
I have electric start 4 stroke lawn mower it was about 2 years old I got it from the tip. The owner was junking it because the pull cord flywheel(plastic) had broken. I just put a socket in the cordless drill and kick it over and away it goes. great mower as well.
Great video always enjoy watching your video have a great day & weekend
Hey paw paw hope every thing is going good !!
I bought a Sears Craftsman weed trimmer with the drill starter. I loved how it worked and made starting so much easier. I was at Lowe's recently and noticed that NONE of the Craftsman weed trimmers have the option of using the drill starter. Craftsman USED TO be a trusted brand name. Eddie Lampert sold it off when he gutted Sears like a fish.
Thanks for the info about the electric startup pawpaw! Amazing video as always!
I have one of those already for my troybuilt weedeater. I usually use it at the beginning of the season. Great little tool
Paw Paw, Great video, But I like Electric for Just that reason!. Getting too old for that pull start crap. Cheers!
Never heard of such a gadget. Neato! Thanks PawPaw!
My pleasure
Unfortunately for me my machines are all to old to have that feature. Mine are all crank, crank and throw across room I believe. Thanks for sharing. Great video. Can I have a sip of your coffee?
Thanks for the "Heads-up".... My trimmer is so old it doesn't have it....
But my sister just got a new one...I'll pass along information.
Great idea! Thanks. I just bought a 1/2 inch square drive ratcheting adapter so i can use my hd 1/2 inch drill and socket to start my mower and 1963 Gravely tractor. Too hard to pull those cords and strap for me these days. I did it without the ratcheting adapter and when the engine starts the drill and socket go into low earth orbit. Im sure your adapter there is just fine for the small 2 cycle engines. Be well.
Yes this is a specialty tool for the small two cycle engines. The male end is actually a pentagon. (Five sided, not four.)
My Papaw bought a craftsman trimmer a few weeks ago and it came with the drill bit and I think it's so cool
Good morning paw paw. Thanks for the review been thinking of getting one of these
Good morning!
Great video PawPaw, you’re Awesome PawPaw!!! 👍
First time I seen that feature, thanks for the tip...
Yep that’s specific to MTD made machines .
Always use non-ethanol fuel with synthetic 2 cycle oil on those .
I love you man! Great! Love the song too!
That's cool! Save the arm from pulling that cord! Have to look at that one!👍👍👍
Yes Sir I went this route and got a Year out of it, I had bought the $8.00 one first and it rounded off due to cheap soft probably un-hardened steel. So I bought the $19.95 one thinking it would be better, well it was for one season, then it spins inside. spent a month trying to figure out why it wouldn't start , with compression, fuel, new Carburetor, spark plug, drove me crazy. Your saying can't you see if the crank is turning, No because it's covered up with the cover when you put it all back together and it sounds the same as if all was well. If you take the plug out it would turn it over fine , with compression, no. Can't believe it took me that long to figure that out. I think I'm going to Locktite the shaft in the adapter and take my chances.
Thanks! Liked your video, and subscribed
Awesome, thank you!
Now that's jiffy! Every 2 & 4 cycle should have that. Just for us!
One main reason I've gone cordless (Ryobi 40v). Still kills me. Looking at the wheeled version. My friend yanked all his pull starts off and uses his drill. Hell, maybe I'll get a goat.
Hey paw paw! Another good one
PAWPAW for PRESIDENT
I love your intro song you have on your videos. I only clicked on your video because I try to support and watch your videos but truthfully wasn't interested in the guy tool thing. I was surprised I actually learned something will see if my weedeater has an electric start be so much better for my back thanks for sharing!
See there !!!! You never know what PawPaw will try to teach you next !! LOL !
wow i gotta get one sir thks
Pretty cool!
I wish we could still put our cars in gear, pop the clutch and get them started.
I can !! 1965 Ford Falcon ! or any vehicle with a manual transmission.
I still do with my 2005 Scion xB
Wow ya got this thanks for Sharin makes Life easier at Our age to many Cuts on fingers so going to find one of these things !!! Och that Hurts
You are so welcome!
THUMBS UP from the Scrap Dog
Very Good!!!
am feeling the song my cheap brother
You need to team up with Larry the Cable Guy, then you can make video's called Git-R-Done Cheap!
What kind of drill bit do u use which way do u need to turn the drill right or left?
LOL !!!
I still have my almost 20 year old weed wacker. It works well, it all boils down to how much you use them. Every spring it's hard starting and just when I decide to throw it out it starts and then has no issues. That's a weird relationship.
Nice
Nice intro!
Thanks!
Hi Bob that would be great mine is an Echo so it don't have that TC hope all is well there
I think I need to build an ARK !!!!
Hook that up to a riding Swisher😁😁😁
How long does one need to wait if the engine is flooded to try to start again?
About a beer.
Can you leave the pull string stuff inside of it or do you have to remove that?
If your trimmer is made for this, nothing is removed.
That’s neat
Hey paw paw I think I saw you in Shelbyville yesterday in a yellow beetle? If not you got a twin running around.
Wasn't my twin !!!! It was the original !!
Best $8 I've spent.
Cheap thrills, (David Allen Coe)
Never knew that even existed
i enjoyed your song
please do not buy, It stripped out on me on two starts, being careful to stay straight on.
You should return it for a new one. I have had mine through a LOT of starts and still as good as the day I bought it.
Nice