since 2000 working in airlines/aviation industry...as a check-in/ticketing staff..and once i onbaord in cockpit on ATR 42 from SKZ to KHI in 2013 on sublo ticket ID00 as a staff member due to nonavaiblity of seats on A/C .. sir .... NORDAL really this video was amazing and 100% informative for me to read Avionics .... May GOD (ALLAH) bless you ISLAM
At 08:36, you were already on a descent profile, why did you increase your airspeed from 200kt to 230kt - before you were asked by the controller to go back to 200kt?. Again, thank you so much for the detailed video, as a flight and simulator enthusiast, I learned a lot.
Standard speed during descend is 240 kt. In this company, we use 230 kt. If ATC had not asked us to reduce the speed, we could have maintained 230 kt all the way to the approach.
Hi Magnar. Just interested to know why you had the re-circulation fans off? Is this a COVID 19 related decision? I also can’t find it mentioned anywhere in the FCOM but I have a question related to starting engine 2 in hotel mode, [prop brake on]. So the mistake being, - after initiail light off by bringing the CL up to feather around 10% NH, but then… subsequently after the secondary ITT raise, moving the CL to auto… Much like you do for starting engine 1 normally. There must be some logic in that the system knows that when the prop brake is on, it won’t be able to take the engine out of feather and into a ground idle pitch(auto ) So I’m hoping there is no risk of delivering too much fuel flow to the engine unnecessarily. Hope this makes sense! Tim
Yes, the recirculation fans are off because of Covid-19. ATR aircraft don't have HEPA filters (although it is offered as an option). Regarding engine start, I recommend this video: th-cam.com/video/sF8q8bcR8TU/w-d-xo.html
Hi Captain, I'm sim pilot and enthusiast and watching these videos now with much interest awaiting the launch of the ATR on Microsoft Flight Simulator. A quick question regarding speed management. Noticed starting at 14:40 how the actual speed falls below the set speed (which I know is just a reference) for what it seems due to VS being decreased and maybe some task overload changing NAV source and setting up for the ILS? Is this much speed deviation acceptable given the still generous safety margin? I'm always way too focused on maintaining reference speeds in planes with manual speed control and was always curious how much variance is allowed/accepted in operation. Thanks for the great videos!!
The target speed is a guidance. Since ATR aircraft don't have autothrottle, we control the speed with engine power. At the time you mentiones, we were a bit below the vertical profile and reduced the sink rate. The power was not increased enough, and therefore the speed started to decrease. After getting established on the ILS localizer, the power was increased. Minimum speed with flaps 0 is the white bug (124 kt) that appears on the speed tape at 15:05.
@@FlywithMagnar Thank you very much for the explanation. Just one more question regarding the before taxi checklist. Does the TRU have to be actually turned on by pushing the button in or just have to be checked that it is on and functioning on the synoptics page?
@@FlywithMagnar Hmm, interesting. So if it's required throughout the flight then why didn't they make the switch indication logic like the other overhead buttons. Dark when active and show "off" when it's off?
The TRU was designed to supply DC power from the ACW system in case of dual DC generator failure. Early ATRs did not have TRU, and if they lost both DC generators, the batteries would only last for 30 minutes. The TRU prevents this. Some years ago, there were one or two incidents where ATRs with glass cockpit lost all display units. Thankfully, this happened when the aircraft was in VMC. ATR found out that using the TRU in flight prevents this from happening. ATR is working on a permanent solution, but it cannot be implemented until it has been thoroughly tested.
No, I haven't flown it. The SAAB 340 was introduced one year before the first ATR, the 42-300. Therefore, I consider both aircraft to be of the same generation.
At 12:25, you say the anti-icing was switched off when it isn't - it's fairly obviously just edited video with the black box overlapping the other areas on the MFD and the anti-icing text partially showing regularly behind the edit until 14:14 when it's actually switched off. Is there any reason the video is edited like this? Is it important that the anti-icing should have been turned off earlier and was forgotten? Or is this to demonstrate best practice on the video and wasn't really important?
On this landing, I used a little reverse because we wanted to taxi in taxiway A2, which is 1200 meters from the threshold. The next taxiway, A3, is another 1200 meters down the runway. This maneuver saves us 5 minutes.
Sir I wanna ask about rudder pedals that how it is possible that with one single rudder pedal on ground we perform flight control check for deflection of rudder as well as we perform braking action??
The rudder pedals are interconnected. When one of the pilots press on a rudder pedal, the other pilot will see and feel the movement. This check is performed before take-off. Do you mean brake test? We test the brakes when we start to taxi: First the captain, then the first officer, and then the emergency brake.
@@FlywithMagnar ok but sir when we taxi then we perform brakes using rudder pedals right and at the same time i saw that they are doing flight controls checks for rudder deflection as well? How it is done brakes plus rudder deflection during taxi with rudder pedals??
![MSFS | ATR72-600 Tutorial - Episode 7: Trim (and How to Use it to Help Fly an Approach!) [4K]](http://i.ytimg.com/vi/c9XvKgOTuNA/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
I'm not an aviator, but REALLY enjoyed that very much. It is a lot of information to take in for a pilot. I'd love to see more like this. Thank you.
THANK YOU CAPTAIN. I installed ATR72 on my msfs2020 and learned a lot about this beautiful plane especially the ILS landing thanks again .🛩🌹
since 2000 working in airlines/aviation industry...as a check-in/ticketing staff..and once i onbaord in cockpit on ATR 42 from SKZ to KHI in 2013 on sublo ticket ID00 as a staff member due to nonavaiblity of seats on A/C .. sir .... NORDAL really this video was amazing and 100% informative for me to read Avionics .... May GOD (ALLAH) bless you ISLAM
I'm mesmerized by glass ckpt gloss at Lagos... just logged time and greased the ldg... Thanks! all that sim time eventually paid off!!
Thanks, Captain. Nice flight. :)
Beautiful and best detailed aviation videos by far!
Great to see this. I flew model airplanes in the 80’s, much fun but much less complex! Wish you good and safe flights!
Great video Captain
Very nice. Thank you for your videos!
Nice flight. Thank you!
I thought the flare was more abrupt. It seems VS started to go down before the flare. Good to try in my sim game 😛
The flare starts at 20 feet. Before that, we maintain a constant descent.
great, thx! happy landings!
Nice job! Right on the TD marker!
Nice video! Thank you for sharing
At 08:36, you were already on a descent profile, why did you increase your airspeed from 200kt to 230kt - before you were asked by the controller to go back to 200kt?. Again, thank you so much for the detailed video, as a flight and simulator enthusiast, I learned a lot.
Standard speed during descend is 240 kt. In this company, we use 230 kt. If ATC had not asked us to reduce the speed, we could have maintained 230 kt all the way to the approach.
This was great to watch. Subscribed!
A fair bit more going on there than in my Cessna 152! ;) Very interesting! Best wishes, Steve
Nice! 👍🏻
Hello Cpt Nordal.Love your video.How is life in Nigeria as an ex-pat?Take care yourself,safe flights,happy landings.
Poetry in motion!...
Thanks for the video
Great video.
Hello CAPTAIN. Beautiful flight. Why you set the radar to stand by before final approach. Thanks
It was clear sky ahead of us.
Thanks for this video! Great! What Takeoff weight was?
The white bug speed was 128 kt, which means the weight was around 18.7 tons.
You working on an ATR Monsieur JAR?
@@a.nelprober4971 Viacheslav with his crew work on it and have good progress for now.
@@j.a.romanov30 nice
Perfect
Expect lighting in thunderstorm cells!!
I find a bit non congruent that the ILS symbols in the "EADI" are green while are blue in the "EHSI".
Thank you for sharing.
All localizer and glideslope indications are blue. The green lines on the "EADI" are the flight director bars.
@@FlywithMagnar Thank you!. My mistake. Cheers.
Hi Magnar.
Just interested to know why you had the re-circulation fans off? Is this a COVID 19 related decision?
I also can’t find it mentioned anywhere in the FCOM but I have a question related to starting engine 2 in hotel mode, [prop brake on].
So the mistake being, - after initiail light off by bringing the CL up to feather around 10% NH, but then…
subsequently after the secondary ITT raise, moving the CL to auto…
Much like you do for starting engine 1 normally.
There must be some logic in that the system knows that when the prop brake is on, it won’t be able to take the engine out of feather and into a ground idle pitch(auto )
So I’m hoping there is no risk of delivering too much fuel flow to the engine unnecessarily.
Hope this makes sense!
Tim
Yes, the recirculation fans are off because of Covid-19. ATR aircraft don't have HEPA filters (although it is offered as an option).
Regarding engine start, I recommend this video: th-cam.com/video/sF8q8bcR8TU/w-d-xo.html
Hi Captain, I'm sim pilot and enthusiast and watching these videos now with much interest awaiting the launch of the ATR on Microsoft Flight Simulator. A quick question regarding speed management. Noticed starting at 14:40 how the actual speed falls below the set speed (which I know is just a reference) for what it seems due to VS being decreased and maybe some task overload changing NAV source and setting up for the ILS? Is this much speed deviation acceptable given the still generous safety margin? I'm always way too focused on maintaining reference speeds in planes with manual speed control and was always curious how much variance is allowed/accepted in operation. Thanks for the great videos!!
The target speed is a guidance. Since ATR aircraft don't have autothrottle, we control the speed with engine power. At the time you mentiones, we were a bit below the vertical profile and reduced the sink rate. The power was not increased enough, and therefore the speed started to decrease. After getting established on the ILS localizer, the power was increased. Minimum speed with flaps 0 is the white bug (124 kt) that appears on the speed tape at 15:05.
@@FlywithMagnar Thank you very much for the explanation. Just one more question regarding the before taxi checklist. Does the TRU have to be actually turned on by pushing the button in or just have to be checked that it is on and functioning on the synoptics page?
The pushbutton must be pressed in to activate the TRU. It is disengaged after landing.
@@FlywithMagnar Hmm, interesting. So if it's required throughout the flight then why didn't they make the switch indication logic like the other overhead buttons. Dark when active and show "off" when it's off?
The TRU was designed to supply DC power from the ACW system in case of dual DC generator failure. Early ATRs did not have TRU, and if they lost both DC generators, the batteries would only last for 30 minutes. The TRU prevents this. Some years ago, there were one or two incidents where ATRs with glass cockpit lost all display units. Thankfully, this happened when the aircraft was in VMC. ATR found out that using the TRU in flight prevents this from happening. ATR is working on a permanent solution, but it cannot be implemented until it has been thoroughly tested.
Magnar, I wonder if you’ve flown the Saab 340 and whether you think the ATR is a modern progression of the Swedish aircraft.
No, I haven't flown it. The SAAB 340 was introduced one year before the first ATR, the 42-300. Therefore, I consider both aircraft to be of the same generation.
Landing on runways with no centerline lighting at night looks hard.
At 12:25, you say the anti-icing was switched off when it isn't - it's fairly obviously just edited video with the black box overlapping the other areas on the MFD and the anti-icing text partially showing regularly behind the edit until 14:14 when it's actually switched off. Is there any reason the video is edited like this? Is it important that the anti-icing should have been turned off earlier and was forgotten? Or is this to demonstrate best practice on the video and wasn't really important?
Yeah man
Shifters
Hope Noone in front of you
❤
Is there a reason why you have decided to fly in Africa?
👍✈️🛌
Do you reverse thrust?
On this landing, I used a little reverse because we wanted to taxi in taxiway A2, which is 1200 meters from the threshold. The next taxiway, A3, is another 1200 meters down the runway. This maneuver saves us 5 minutes.
Sir I wanna ask about rudder pedals that how it is possible that with one single rudder pedal on ground we perform flight control check for deflection of rudder as well as we perform braking action??
The rudder pedals are interconnected. When one of the pilots press on a rudder pedal, the other pilot will see and feel the movement. This check is performed before take-off.
Do you mean brake test? We test the brakes when we start to taxi: First the captain, then the first officer, and then the emergency brake.
@@FlywithMagnar ok but sir when we taxi then we perform brakes using rudder pedals right and at the same time i saw that they are doing flight controls checks for rudder deflection as well? How it is done brakes plus rudder deflection during taxi with rudder pedals??
@@Aviatorammar When you move the entire pedal, you move the rudder. When you press down the top of the pedal, you apply the brake.
@@FlywithMagnar ok you mean that rudder pedals have two portions the upper and the lower am i right sir ?? Correct me if I am wrong somewhere??
You push on the lower part of the pedal to operate the rudder, and the top of the pedal to operate the brake.
Very Informative!