CZ Shadow 2 trigger pull reduction

[@rb9998]

Nicely done

[@danhunik7949]

I have played with this set up and found the trigger to be a lot lighter but it would only fire federal primers.

[@chrisesershootingjourney9574]

Yes you’re right. To make sure it will ignite you’re non fed primers I suggest to change your firing pin to extended one.

[@danhunik7949]

@@chrisesershootingjourney9574 I had in the extended firing pin and reduced power spring.

[@chrisesershootingjourney9574]

@@danhunik7949 with 13 lb hammer spring I used campro (ginex) with stock firing pin and spring no problem. Not sure with other brand.

[@philipheelham3061]

Gun should be hold in a vice to test trigger weight

[@deathspawn54]

Is the recoil spring 11lbs from factory?

[@chrisesershootingjourney9574]

No it’s not from factory. You could buy it separate from 14lbs down to 10lbs made by CGW.

[@alwyndumuk4379]

gunsmith