Thanks as always 👍 'most' of us are always very appreciative of you taking your time to offer assistance 👍Many thanks for that. Particularity found the flight level control option a good one that I'll be setting myself and testing today.
And thank you again 🙏🏻 I’m still trying to fly straight with the Cessna 172 but I can’t seem to get the trims set to maintain a steady nose and left wing that keeps want to go down but as soon as I have that figured out , I will try auto pilot. It looks like I’m flying diagonal left when I’m holding my nose and wings straight 🤔🙄
For some reason, some of the aircraft, like the iniBuilds a330 wont allow me to save custom views. The camera jumps all over the place. Outside, cabin, cargo area….etc. I setup one aircraft with no issue, then another wont work
How do you get the external views to pan around on a flight stick. Using my hotkeys I can only get the camera to pan halfway in other words 180 degrees and not 360 degrees as you did in this video?
excellent as always, any idea why my Cessna 172 wont move forward when releasing the parking brake ? have a button mapped to my velocity one flight yoke which works as it should, releases the parking brake but no aircraft movement. any ideas !
I found the culprit... The ESC key is mapped like all the others on the keyboard and I accidentally removed this function while mapping other bindings. Everything works fine now!
Hi James. I have a Velocity One Flight Stick and V1 rudder pedals connected to my xbox x. They are clashing with the xbox controller. Any idea how I tell the controller menu to use one or the other so they don't conflict please ? Any tips on this most welcome. Thanks for another great video.
@@Huddison For example, the Xbox controller wont work properly until I cycle/move the V1 Flight Stick. Hard to explain unless you see it yourself. It's like msfs 24 is loading both controllers and they are fighting each other.
@@paulthurston2883 I get similar in Missions if I use my attached 360 controller - I can no longer reliably use keyboard commands. Probably down to rogue code or similar.
@@Huddison The cockpit internal head view (controlled by (Right Stick Roll) on the Xbox controller was constantly slowly drifting to the left. I tried setting dead zones in the Xbox controller. No good. Turned out to be coming from the top right hat switch on the Velocity Flight Stick. Still no idea why its loading both controllers. I hope they fix this soon.
I have an issue in cockpit view. The screen slowly zooms in and I can’t stop it. This is very irritating when looking at instruments. Any idea on how to stop this please
It sounds like a possible controller conflict. Are you on Xbox or PC? Try removing all controllers and add them back one by one, to see which is causing this.
@@Huddison I’m on xbox series x with turtle beach velocity one yoke and flightstick. Thank you for your advice.I will try this later today. The thing is it started two days ago. Initially I didn’t have a problem. Thank you for all your videos really a great help. Kind regards Rob
@@RobertRogers-e6mI noticed this today for the first time as well, very odd. But I rebound the buttons abd then all was well after that. This sim does some odd things now and then.
@@hammerpgh I did what Huddison suggested. Disconnected my velocity flightstick which sorted the problem. I’ve had my first enjoyable afternoon on 2024 today. Still plenty to sort out. Trying to setup reverse thrust for airliners is on not proving easy as it was on 2020. Thank you for your help
@@HuddisonHi . I did what you suggested and it worked. Disconnected my velocity one flightstick. Had my first enjoyable afternoon on 2024. Thank you again for your help. Rob
Hello, thanks again for this very important configuration. I,m thinking to change for pc! I,m on xbox x. I like very much your new pc upgrade. But for the moment can I ask you if there is a solution for the mouse. In cockpit is spinning all the time I make a Click. Perhaps a bug not solved yet? And another question, on my Xbox I have a Sony Tv 4k. For pc is is going to cost a lot having 4k. Is there a big diference for 1080? Sorry for this question but if you can answer me, I appreciate your kindness. Jose from Portugal
Hmmm .. I am on a XBox (series X), with a velocity one yoke, keyboard/mouse, and a XBox controller ... all work fine for me .. one caveat: I have a wired keyboard/mouse .. I put a little 4 port hub strapped to the side of the racing stand, I have my V1 Yoke on, and plugged in the keyboard, mouse, and yoke into the USB hub.It worked, but not reliably ....When I connected a wire to the Xbox controller, and plugged it into the usb hub, the yoke would lose power. I realized I had a power problem .. the V1 Yoke pulls all the power it uses, through that usb cable. By it's self no problem .. start adding other devices that pull power down usb cables, at some point you can't pull enough power down the usb wire. Easy problem to solve, once you realize it. I put a powered USB hub, to replace the un-powered one .. and all have worked flawlessly every since. Hope this helps, Jake
Says he's going to show how to use the HAT switch to switch between instrument views. Proceeds to not show how to set HAT switch to instrument views. For anyone wondering how to do this. Set Previous and Next Instrument view as HAT switch left and right. Set Instrument view 1 as HAT switch down.
@@Huddison You only gave instructions for instrument views for a specific throttle quadrant that most of your viewers won't own. If you are aiming the video to help the majority you would show how to get to instrument views on the controllers most people use (Keyboard, mouse, controller, Hotas one) or title the video differently.
Thanks as always 👍 'most' of us are always very appreciative of you taking your time to offer assistance 👍Many thanks for that. Particularity found the flight level control option a good one that I'll be setting myself and testing today.
Thanks, much appreciated.
As always. Excellent video, very informative and a pleasure to watch and learn from. So please, keep these FS24 videos coming. Great work. Thanks.
I will do, many thanks.
Glad we have you Huddy, thx a lot.
I'm glad for your support ;)
Great - so useful, those settings I took for granted in fs2020 and had no idea how to port them over to 24, many thanks!
It should've been much easier for people; glad to be of service.
My 2 brothers and I were playing around with the walk around mode last night. Nice
Thanks again! These are some bindings that I'm going to add to my V1 yoke/throttle. Very helpful!
Thank you
Thank you for this. A help for sure. Am sure the person that designed the system does not play
It does make you wonder.
Top man. Thank you so much.
No problem 👍
Thank you 🙏
You’re welcome 😊
And thank you again 🙏🏻
I’m still trying to fly straight with the Cessna 172 but I can’t seem to get the trims set to maintain a steady nose and left wing that keeps want to go down but as soon as I have that figured out , I will try auto pilot.
It looks like I’m flying diagonal left when I’m holding my nose and wings straight 🤔🙄
A Back to Basics Video for F2024 will be incoming.
@ im looking forward to it very much 🙏🏻
A few times I got stuck outside of the aircraft and could not get back in. I knew about Shift+C but for some reason it did not work.
For some reason, some of the aircraft, like the iniBuilds a330 wont allow me to save custom views. The camera jumps all over the place. Outside, cabin, cargo area….etc. I setup one aircraft with no issue, then another wont work
What I would like to find is the "V" (map) and "N" (Nav) from 2020 in 2024.
Hi! Have you found out yet how to set the altimeter to the current pressure? Like the 2020 "b" key? I haven't found it...
In settings/controls, set keyboard to 2020 transversal.
Just using the citation after todays update now I cannot remove the yoke!! Plus the cameras are driving me mad.........
How do you get the external views to pan around on a flight stick. Using my hotkeys I can only get the camera to pan halfway in other words 180 degrees and not 360 degrees as you did in this video?
Watch through this video th-cam.com/video/K0M6-kBqX6g/w-d-xo.html
I bought the velocityone rudder for my velocityone flightstick, btw. Just couldn't resist the 180€ wich is about 150£
Nice purchase.
excellent as always, any idea why my Cessna 172 wont move forward when releasing the parking brake ? have a button mapped to my velocity one flight yoke which works as it should, releases the parking brake but no aircraft movement. any ideas !
You are putting some decent throttle in to get it moving?
@@Huddison yes, even tried deleting assignment and re-configuring but no joy.
My problem at the moment is that the "escape" key does not work... seems it is a problem for others as well... 🤷♂️
Is that on Xbox or PC?
On PC... it worked perfectly at first.
I found the culprit... The ESC key is mapped like all the others on the keyboard and I accidentally removed this function while mapping other bindings. Everything works fine now!
@@Gilles45 Good to hear.
Hi James. I have a Velocity One Flight Stick and V1 rudder pedals connected to my xbox x. They are clashing with the xbox controller. Any idea how I tell the controller menu to use one or the other so they don't conflict please ? Any tips on this most welcome. Thanks for another great video.
Hi Paul, in which way are they conflicting?
@@Huddison For example, the Xbox controller wont work properly until I cycle/move the V1 Flight Stick. Hard to explain unless you see it yourself. It's like msfs 24 is loading both controllers and they are fighting each other.
@@paulthurston2883 I get similar in Missions if I use my attached 360 controller - I can no longer reliably use keyboard commands. Probably down to rogue code or similar.
@@Huddison The cockpit internal head view (controlled by (Right Stick Roll) on the Xbox controller was constantly slowly drifting to the left. I tried setting dead zones in the Xbox controller. No good. Turned out to be coming from the top right hat switch on the Velocity Flight Stick. Still no idea why its loading both controllers. I hope they fix this soon.
@@paulthurston2883 Thanks for letting us know. You can put a tiny bit of dead-zone in on the V1 FS View axis, to stop that.
Any idea how to get rid of the red man error sitting on my planes?
Never had it.
I have an issue in cockpit view. The screen slowly zooms in and I can’t stop it. This is very irritating when looking at instruments. Any idea on how to stop this please
It sounds like a possible controller conflict. Are you on Xbox or PC? Try removing all controllers and add them back one by one, to see which is causing this.
@@Huddison I’m on xbox series x with turtle beach velocity one yoke and flightstick. Thank you for your advice.I will try this later today. The thing is it started two days ago. Initially I didn’t have a problem. Thank you for all your videos really a great help. Kind regards Rob
@@RobertRogers-e6mI noticed this today for the first time as well, very odd. But I rebound the buttons abd then all was well after that. This sim does some odd things now and then.
@@hammerpgh I did what Huddison suggested. Disconnected my velocity flightstick which sorted the problem. I’ve had my first enjoyable afternoon on 2024 today. Still plenty to sort out. Trying to setup reverse thrust for airliners is on not proving easy as it was on 2020. Thank you for your help
@@HuddisonHi . I did what you suggested and it worked. Disconnected my velocity one flightstick. Had my first enjoyable afternoon on 2024. Thank you again for your help. Rob
Hello, thanks again for this very important configuration. I,m thinking to change for pc! I,m on xbox x. I like very much your new pc upgrade. But for the moment can I ask you if there is a solution for the mouse. In cockpit is spinning all the time I make a Click. Perhaps a bug not solved yet? And another question, on my Xbox I have a Sony Tv 4k. For pc is is going to cost a lot having 4k. Is there a big diference for 1080? Sorry for this question but if you can answer me, I appreciate your kindness. Jose from Portugal
Hello Jose, it's a bug with the Xbox platform atm - expect this one to be fixed asap.
Hmmm .. I am on a XBox (series X), with a velocity one yoke, keyboard/mouse, and a XBox controller ... all work fine for me ..
one caveat: I have a wired keyboard/mouse .. I put a little 4 port hub strapped to the side of the racing stand, I have my V1 Yoke on, and plugged in the keyboard, mouse, and yoke into the USB hub.It worked, but not reliably ....When I connected a wire to the Xbox controller, and plugged it into the usb hub, the yoke would lose power.
I realized I had a power problem .. the V1 Yoke pulls all the power it uses, through that usb cable. By it's self no problem .. start adding other devices that pull power down usb cables, at some point you can't pull enough power down the usb wire. Easy problem to solve, once you realize it.
I put a powered USB hub, to replace the un-powered one .. and all have worked flawlessly every since.
Hope this helps,
Jake
Does the saitek throttle quadrant work on xbox with the velocity one stick?
No, you'll need the honeycomb XPC and Hub to get that particular throttle working on Xbox.
@Huddison aight, thanks!
Shift-C did not work for me till I drilled down and deleted a file in the sim. (if anyone wants to know what it is let me know)
Says he's going to show how to use the HAT switch to switch between instrument views. Proceeds to not show how to set HAT switch to instrument views.
For anyone wondering how to do this.
Set Previous and Next Instrument view as HAT switch left and right.
Set Instrument view 1 as HAT switch down.
?
@@Huddison You only gave instructions for instrument views for a specific throttle quadrant that most of your viewers won't own. If you are aiming the video to help the majority you would show how to get to instrument views on the controllers most people use (Keyboard, mouse, controller, Hotas one) or title the video differently.
@Huddison Hey man, where were you raised? I know its a weird question but I'm wondering what region the accent is from.
In the North of England, Lancashire.