INSTALLING 64 COLOUR INTERIOR AMBIENT LIGHTING + AMBIENT VENTS INTO ANY MERCEDES C-CLASS W205
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- Installing the 3 to 64 colour ambient lighting and interior ambient turbine vents to my 2016 C-Class W205.
Links to the kit:
www.aliexpress.com/item/10050...
www.aliexpress.com/item/10050...
Always message the seller before hand with your Mercedes model and existing setup to make sure you're getting the right kit. - ยานยนต์และพาหนะ
Mate I can’t believe I’ve actually managed to find a video that’s actually from the uk as well! Spot on mate!
So true! Usually most mod vids are from the us
Really helped me yesterday, installed my ambient set up minus the vents. Couldn't have done it without your video - thanks a lot man!
So annoying how he just skips stages. What’s the point of uploading video like this when you going to not record everything 😊
I’m so thankful for this video!
Bro I can't thank you enough for this video. I've got a c coupe as well. The video was spot on and helped me fit mine. I took 2days as well !
How difficult was it ? Could you pm me I m looking to do it too on my w205
Is a c300 2016 able to mod this?
@@mariahkemp969 any W205 can have this retrofitted
@@jawad6950 okay thank you for telling me sorry I don’t speak car 😭
Man, I just got a 64 color kit for my C43 that came with the 3 colors only as well.
Tks for the vídeo.
It doesn’t look easy but it’s doable. Had to get this kit because the one color I want didn’t come on the 3 color. Blue!!
Thanks mate, this helped a lot
Hello. I have a question did you change also the led inside the cup holder and the handle door open and the small leds in the center of the roof or you keep the original ? my question is how you get there the 64 color?
Hi bro,
Thanks for the video was clear enough and complete, well done 👍
The only question that i want to ask you is ? Do i need to run the extension pins through door electric coupling know that my car (w205) came with original ambient light on ( 4 doors, 4 footwell, Center console, cup holder & roof ?? Thanks
Thanks so much Really helped me do it also !
Which of the 18 options do I get for a w205 sedan?
Do I need to both side the pins or one sode just to connect to give power
Great video and very helpful,just wanted to ask you regarding the pins it mean did you remove 4 original and replace from the new kit or was enough empty pocket to put the new ones?Thank you
Hi Emi. I've got 2 issues. Colours are not synced (I'll try to disconnect as you advised). Also, do I have to replace factory leds with the leds that have been shipped buy the seller? Thanks!
Do the lights shut off with the car? Or do you have to manually turn them off in the settings menu?
Hey Bro Good work 👍
One question.
I have the Same Kit
but my Problem is the led dont work when i put it in the door.
Do i Must put the 4 colors Kabel in the harness ? Then it works?
I think when i put the led at nummber 3 at the door it must work the new led or im wrong .. ?
Sorry for my english im from germany
Thank you
Thanks for the video.. very informative. I do have a question. For the seat lights, did they stay orange like the OEM ones or did they also change and you change the diode?
Hey, my vehicle is already equipped with the 64 computer. I did order the Af vents because that’s the only thing that doesn’t have ambient lighting. My question is is there a connector under the console which will allow me to plug and play the new ambient Af vents to the original
did yours come with the ambient light software
Hey ,did you have to disconnect car battery before installation?
My don’t have the ambient lights system anyway of installing them onto it
Did u connect the new turbine vents wiring into the Oem port how did u get them to come on or do they work n power from the obd
Thanks for your this video lad, I really need your help cos I’m stuck here, where did you connect the other end of the pin you ran through the harnesses 5:20 you didn’t say in the video, pls help
How did you connect the kit to the car? Fuse etc. Why didn’t you show that ?
Did you replace the LED strips on the center console and side doors? I think I missed that, or did u use the same stock LED light, and gave it 64 colors. I’m confused. Feels like I’m missing something from the video.
Where did you order the entire kit. I have the same car. I wanna do this ASAP . Help pls.
Wow that’s a lot of work but it looks good.
What if you have 0 color ambient lighting?
How has the lighting kit held up bro ? Does it still work and how is the quality ? Would you recommend ?
Does anyone know if this is possible on the new W206 c class? if so, are there any US modders/dealerships that do it?
Hi i have the same in my E klass but one of them doesn’t change the color
It’s have only red color and I don’t know what the problem and why i cant change the color
Do you know how to fix it?
Great job 👍🏼 need this on my W205, where about you based mate?
I got the same kit I have installed everything but I can’t power up the lights
How to did you connect the pin wires
How much does this upgrade cost to have it done by you and we’re are you located.
Thanks
Lee
You doing a good job bro keep them coming👏👏👏 I am still waiting for your android screen install
Cheers man, hahaha I don’t fancy taking the screen out again to make that video 😂
Can this be done on a PFL w176 A45 ?
Yooooo.. Amazing.. i want on my Benz as well.
Do you install for others persons ?
I wished to do it but i dont have skill for that.
Where did you get the ambient vents Brother?
so u didnt need to get you car recoded to be able to change colors from main ambient color change on the cars screen..i hear on alot of kits you need to do this to have it work this way..were did u purchase your kit?
My ambient keep blinking somtimes. Bad for driving. What can be wrong?
Hey! Thanks for the video, any chance you can also upload video with brightness to minimum settings? it seems too bright for me and really hesitate to spend 600$ on it :d
This video is a gem but you skipped all important and difficult parts.
Onde acho o kit para o modelo Mercedes Cla 200 2014?
Were can i get this the link in your description doesnt work
hello it seems you forgot to mention where you ran the door panel final plug into. after you did the whole door panel job you routed the final plug into the cabin however you did not say where were supposed to plug into afterwards. any help on that?
I think he ran it all into the centre console
Hey i installed this kit and got it to work and everything, but at the start i had purple red the bright colours but now i only have like 40 shades of blue,green,cyan. Any ideas as to why? I noticed it flashed between purple and blue like 3 times then it stayed with the blue green cyan colours only.
The red led has died by the sounds of it
Hi,
Thanks for the video i just have a few questions if thats okay, many thanks for your hell in advance
1 - How do the ambients get power? I understand its all connected to the centre console but the adapter shown at the start of the video only shows the optics?
Any help would be very much appreciated
Amazing Video. Sadly I think it's above my skill level. Do you know where I can get this done? Even better, can i pay you to do mine?? Haha.
Hi I am in London do you install please as I have same kit. Thanks
Bro... just show me wich pin where to put it in the harness..
Can do this to my GLC 300 Coupe ?
Do you have to wire the pins into the door harness on both sides or just the one side? Does anyone know?
Both Front doors
Where in london are you based ? Do you do installation ?
Salaam bro, would you fit this for someone?
Brilliant video and job. Surely there has to be an easier way??
Hello life of Emi, did you use the OBD activator of alibaba to configure the ambiligt ?
My car already had 3 colour ambient lighting and so I didn’t need it
Hi
I have c class 205 and bought kit but not sure how to active it
I don’t have an option for ambient light
you need to buy a kit with OBD as your car does not come with 3 color ambient light
check this link
th-cam.com/video/BzHINSsDBho/w-d-xo.html
Thanks this video is great until we watched it we thought our kit was missing a control box for the middle lights and vents. But thanks to you we know we have to use the 2 wires with pin ends in the door connector. the kit had no instructions
Wait I still don’t get it, how do the lights get power? Some people tell me to just plug in the OBD2 port but that doesn’t work for me, than some say, connect the main module to port 3 on the door side and than others is to connect the pins like you, but I’m lost and don’t know what to do
Did you ever figure this out having the same issue ?
Where can this item be purchased
Looks great well done. Can you answer a question or two? I have factory fitted 3 colour and am hoping to fit the same type vents as you have with just the 3 colours (so not upgrading to 64 colour). My question is to just fit the vents - would i need to take off the door cards and insert the new pins - or was that part associated with the 64 colour upgrade? as i say i'm looking at fitting the new 3 colour air vents- is it just a case of wiring into the centre console ambient light plug - like a piggyback plug ? thanks
Do you have installed the 3 colour vents now? Do they fit with the OEM ambient light or would you recommend me getting the 64 colour vents for making it fit better to the regular ambient lights? Thank you
Does it work with w177
Hi, I wanted to ask you after you turned off the car, do the lights come on automatically and when the car is turned off??
The lights will turn on when you unlock your car even when the car is off, it’ll be in sync with your interior roof light
I’ve got the exact same car as you but struggling to choose between the options for the 64 colours, which one did you pick for your car as there’s about 10 different ones to go of? Cheers
Hi mate message the seller and they’ll show you which one to choose, let them know what car you have and that you have 3 colour ambient lighting already
Thanks mate appreciate it!
How i Can to conected centaral obd
hi EMI , The seller via ur link provided in the description has mentioned to buy OBD2 from the store... needs to know if an obd2 works that has been built only for a specific addons or can i buy another obd2 from another seller that is much cheaper than the same store that sells int ambient lights ....
**ps : i have a w205 C200 basic model with the basic screen that doesnt have any ambience light options ...please help....
Did u figure it out? Mine don’t have the setting ethier
@@fnasty323 You can get it coded via Vediamo or DTS Monaco
how did you learn to fit the AMBIENT LIGHTING + AMBIENT VENTS ? is there any other video because I did not get where you connect the main harness for the light and the other question when you bought these lights from Aliexpress did you pay tax for it? I mean did the courier send you a letter to pay tax before delivery?
thank you
Hi yeah I couldn’t find anything on it either, which is why I was learning as I was filming which is why it isn’t totally clear, there are two harnesses with 4 different coloured pins, one of the harnesses has a female connector and the other is a male connector, you have to place these into the existing door harness, in the video it shows how to do this, and I didn’t have to pay any tax when I got mine
@@LifeOfEmi Thank you very much for your quick response. we waiting for more videos also if you can show us how we can upgrade our car sound system, please. My car is C class w205 premium.
@@amirkhalifeh5672 thanks, not planning to do any sound system mods, as I’ve got the burmester and don’t want to really change it as I’m really happy with it, but more videos on other stuff coming soon!
It seems as if the kit is no longer available from Aliexpress. Does anyone know where i can purchase this kit?
DMP car Design
Hiii Yoo same like this is there for w222
Great video!!!
Do u only need to pin 1 door? Or do u need to pin the extra cables in every door?
You only pin one door, this just allows the connection to go into the cabin to join the rest of it in sync
@@LifeOfEmi great! De the off the doors is just plugging in the module and it will work fine?
Wish this video was better detailed he left out so much information
Good video mate. I had the illuminated vents fitted in my 2018 GLC63 today but when I left the installers I had loads of errors come up on the dash did you get any messages or problems?
They have connected the box that came with the vents to the can bus on drivers side so I unplugged it and no more error messages?!?
I haven’t had any error messages, with mine, usually you connect through from the passenger side, however I don’t think it would make much difference, what errors came up?
Cheers.
Yeah they plugged it into drivers side under the floor. I was getting allsorts coming on the dash like brake assist error, electronic diff not operational and the engine management light came on so I unplugged the box and just left the rest of the wiring in and restarted the car and they didn't didn't come up again but I did scan with my obd and got u0001 & u0100 permanent and they won't clear. Wonder if that's because the rest of the vents wiring is still in?
Hey Mate,
I think I have a similar kit where you have to connect it to canbus. I have no clue how to install it and i'm worried i'll get a load of errors like you did. Any update on your situation.
Hi mate,
I got another local audio installer come out and have a look and he sorted it in 5 mins! Basically it wasn't plugged into the Cambus but another port that looked the same. It was under the floor on driver side though.
@@nickclarke2444 how much did the installers charge you to install the vents?
is it brighter than original ones?
Much brighter I would say
Can you install for me live in south ldn
Also did you do the ambient lighting in the back of the coupe? Only realised theres lights there too haha
Didn’t do the lights in the back, the kit doesn’t come with that, but I think the only real lights at the back are the air vents that I could add and the one in the roof, which is not noticeable enough for me to be bothered to change haha
@@LifeOfEmi ahh fair enough, thinking of doing the same maybe a remap too!
cool video bro, well done, new i have better idea how I have to install my kit
How did u do it
i still dot understand where the power comes from
Yo bro I saw you have the same aftermarket screen as me can you help me out
By the way theirs a way to activate the 64 colors on the radio
It’s free too
Hello mate I’ve messaged you on Facebook I’m really struggling to get all the lights to even work
Hi was this also installed for the backseats?
This kit just supplied the stuff for the front, however fitting the back seat vents and footwell lights would be the only ambient lighting that’s needed in the coupes, which is the same process as shown in the video
Why don’t you respond to people who’s commenting that they lights aren’t on but you’ll respond to someone who has it working and going.
Hii my friend this is kabir from germany.. is there any chance to contact you? I have some questions and it would be fine if you have few minutes for it
Hey ,did you have to disconnect car battery before installation?