ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
2015 RAM 1500 LED Headlight Bulb Issue RESOLVED ! | No More Flickering/ Turning Off | Canbus Decoder
ฝัง
- เผยแพร่เมื่อ 30 ธ.ค. 2021
- Pretty straight forward video of how I fixed the issue with the upgraded LED bulbs on my 2015 ram 1500.
The light bulb on the drivers side kept turning off no matter what I did until I bought the decoder.
I didn’t know about the canbus system until I ran into this issue.
Hopefully this video helps you guys out ! (:
Purchase the canbus decoder here:
www.amazon.com...
My LEDs on my ram seem to be flickering on both hi and lo beam. How many decoders come in a pack? Would you need to buy 2 packs to do all 4 bulbs?
Each pack comes with 2 decoders.
And that is a good question, I don’t use the Hi Beams much, but when I do, they don’t flicker. So I only bought one pack for the Low Beams.
I would recommend buying one pack first, and then if the Hi Beams flicker, buy another one 👍
It helped me for sure! I had the same exact issue, but now my bright lights won't come on
Good video, mine were flickering and turning off too. I too have the 2015 Ram, ordering these now 👍🏽
You helped my issue with my 2008 ram. I bought the H13 decoder it fixed my LED flickering and turning on and off.
I see your using the H11 on your ram, well just a tip tho if your connector has 3 wires then you want to go with H13 canbus decoder…. The H8/H11 only has 2 pins has the H13 has 3 pins🤓👌
I have a 2015 ram 1500 sport and I put leds with self built anti flickers and they didn't really work cuz they would turn off. I didn't buy this exact item but I did refer to this video to buy the new leds and some andi flickers like yours just dif and so far so good. My LEDs work no haven't turned off and no codes so thanks mate 🤘
Mine still don't work after buying this product . On auto only my driver side goes off. And if I turn my lights on they flicker every 15-20 mins or will turn off for a little. Anyone got any suggestions.
Thanks for the video man. Will help lots of people trying to use leds
I got led plug In plays. Mine flicker when going from low beam back to DRL. ONLY FLICKER WHILR DRL ARE ON . IS THE FLICKERING BAD FOR THE CAR?
The fact I have the same exact led kit you have and I thought about buying another set thanks
I installed some H13 bulbs in my dad’s truck and the bulbs lit up for 1 second then shut off. I then bought some resistors and they work now but now the High beams stay on the whole time and the high beam switch turns on the low beams for 1 second then goes back to high beams
My 2014 ram 1500 express lights are turning off and on while driving and when I shut off the ignition lights stay on and dash says there on but the switch doesn’t work even if I turn them off does this product fix that issue ? Did anyone else have that exact issue ?
Thanks bro it really helped out
I’m having the same issues just bought auxbeam led bulbs just installed when I turn my truck they turn they shut off don’t even want to turn on
Did you install for every single light? The recorder
I have a 2012 dodge Ram. I’m trying to get my low beams to come on with the high beams. Will this fix that??
Does the metal decoder get too hot inside the housing?
So I got fog lights no housing to plug in play will this work?
My led lights have a decoder built in and my driver light still cut out. Switched the light setting to manual instead of auto and light came back on. I'm so confused
Anyone else having their headlights dim when on the brakes or adjusting the AC blower fan? I've replaced the battery and the alternator, and it's still doing it.
So I need 3 boxes 1 for high beams(9005 kit)…1 for low beams(h8/h11)… and a pack for low beams(h8/h11)?
Thanks man, it helps
Does this work on a 08 Ram as well ?
I have the dreaded 2015 as well, would these work on like morimoto or alpharex headlight assemblies?
I couldn’t tell you bro 🙃
@@shoobiedoubie6871 can those driver/boxes just bounce around in the headlight ? I’m buying the same decoders lol
@@SRT__618 not much, they’ll be okay 👌
Do you also need a decoder on the fog lights and high beam? Or the issue is only on the low beams?
I just install the LEDs on my 16 ram 1500, and my lights are flickering and randomly cutting off for like half a second and than back on.
I really want to prevent pulling the grill again unnecessarily, it’s a major pain in the ass.
I only got decoders for the low beams, I don’t really use the hi beams. I live in Los Angeles. The fog lights didn’t give me an issue tho.
@@shoobiedoubie6871 I got the same decoders you show in this video, and it worked. No more issues.
Thanks for sharing this informations.
@@nicknicolosi1 🤙
@@shoobiedoubie6871 so I need a decoder for each bulb
@@kamronfisher5890 yes, the box comes with 2
When the headlight went out, was it the just the low beam or both?
Just the low beam, I don’t use the high beams too much. And when I do, they don’t turn off.
Mine went completely out on the passenger side
@@shoobiedoubie6871 lmao totally worth it eh
I have that in and mine still went out after driving 30mins plus it was cutting out for a few seconds before it went out.
I had the exact same issue. Only worked for 30 minutes and then they went out. These LED’s on the “older” models just don’t seem worth it.
You didn't get any codes on the dash ? Before install
No sir I did not, it would just turn off. No light on the dash would pop up or anything.
@@shoobiedoubie6871 weird I got a 16 ram with led bulbs they told me about the csnbus errors that you might get but I went with a company called headlight experts good quality 109.00 lifetime warranty that has the antiflicker harness so there is no issues
@@michaelbobb7974 I was not aware of the canbus system errors up until I installed these LED bulbs. The decoder in this video is pretty much an anti flicker harness.
Think my comment got deleted.. use an OBD adapter and AlphaOBD. You don't need these decoders or resistors if you enable LEDs in the trucks computer for low, high, and fogs.
Why would you pay $50 for the obd adapter and additional $50 for full use of the software? These canbus' are $25 on Amazon and work just fine.
@@QuackTheRipper82 Never said these decoders won't work. Just saying it's a cleaner install as you wont have extra parts hanging off your lights. Think about it.. If you want to install LEDs into your low, high, and fog lights, that's 1 decoder hanging off each of your lights (6 total) and $75 spent. If you use OBD reader and AlphaOBD app, you change the trucks configuration to tell it that LEDs are present and you don't need all the extra junk hanging off your lights. Decoders are another item that can fail and then you are out out even more $$ when you have to replace them. It's even worse if you use resistors as they can get hot enough to melt plastic. So it's your choice, just throwing out options for anyone reading.
@@Kris-mj7lt Fair point. That makes sense. In my situation, I own a 2018 Chrysler 300. The hi and low beams run off the same 9005 bulb so only 1 decoder was necessary. I also went with the capacitor style which is significantly cooler than resistors and they tuck perfectly into the housing. I also see what you're saying of more parts equals more potential failures. Plus OBD readers are useful way beyond just this application obviously so that investment goes further.
I did the alphaobd and still have the same problem in the right headlight, after lost of search I fund the the2015 ram us the only one the have this problem, I’m goin to try this
@@gtannosgabriel1484 I have a 2015 and after completing the changes in alphaobd, I had no issues. Make sure to set headlights and fog lights to LED enabled and also set high intensity discharge headlights to enabled. Also make 1 change at a time, wait 5 minutes, then make another change else they may not save. If you still have issues after that, you may actually need those canbus error correctors. Enabling high intensity discharge headlamps is an important step people miss. That will disable the trucks PWM signal for the lights that causes issues with LEDs and HIDs.
I bought these for my jeep cherokee 9005 and they aren't working I have the harness right for plus negative factor and still can't get rid of the low beam out error
The 9005 bulbs are the high beam. The H11 are low beam, if I'm not mistaken. I just ordered this same item for my wife's 2015 Jeep Compass.
@@robertmaul7028 does the resistor on there get hot? I also have a Jeep Cherokee and was wondering where you anchored it down.
@@ariellemiraflores2719 I just pushed it into side between a bracket and panel. It stays in place on its own and gets air to cool it off. Works great.
Any updates?
Sold the truck, but it worked the entire time I had it installed.
so had you watched a TH-cam video before you installed them you wouldn't have to have had to bore us with this video.
Awesome .. stuff Bro. i have the same issue with my 2016 Ram 1500, I bought these LED's : Fahren H11/H8/H9 LED Headlight Bulbs, Upgrade 22000 Lumens 600% Brightness 6500K Cool White LED Bulb, Thanks @shoubieDoubie
I bought the same lights as yours for my 2015 ram 1500 and I already use these same decoders and after 10 minutes they go off and the third time they go out I have to turn off the engine and start to turn them on, something else that you recommend that I can do
Yo what’s up man do you have instagram I’m tryna show you the problem I have with my car man
What you're issue bro