Speed control or duty cycle control with PPM UART serial port can read data You can also use UART for control, one more control method is just to provide customers with different options and wiring methods, Sir.
It allows you to safely use a UART splitter for multiple UART devices while maintaining telemetry data on the remote. Whenever you use a UART splitter, there's a risk that the UART devices may behave erratically, especially under extreme voltage or other conditions. Now, you could run the remote in PPM mode; however, telemetry data would never be visible on the remote. But if you run the remote in UART mode over a splitter, acceleration and deceleration can be compromised, meaning malfunctions could cause an inability to brake. You don't want that while riding. By running in PPM and UART, malfunctions only affect reading telemetry data, so acceleration and braking are not compromised by splitter malfunctions.
Can you help me? I am running the VX4 on my Focbox Unity, and I I need it to be on PPM so I can use the UART for a screen, but when I try to turn off the board, it will not turn off. If I connect the receiver on UART, the board will turn off. Is there a way to fix this? Maybe the receiver needs a firmware update?
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer
Sorry for the late reply, sir. Generally, this happens because there is an error in the parameter setting part. If the problem is not resolved, please take a video related to parameter setting and send it to our after-sales mailbox: flipsky-service@outlook.com Our after-sales staff will solve it for you as soon as possible.
![#008-1: VESC Setup for eFoil [Flipsky 65161 & 75200]](/img/n.gif)
Can you explain why you would need both ppm and uart at the same time. Thanks,
Speed control or duty cycle control with PPM
UART serial port can read data
You can also use UART for control, one more control method is just to provide customers with different options and wiring methods, Sir.
It allows you to safely use a UART splitter for multiple UART devices while maintaining telemetry data on the remote.
Whenever you use a UART splitter, there's a risk that the UART devices may behave erratically, especially under extreme voltage or other conditions.
Now, you could run the remote in PPM mode; however, telemetry data would never be visible on the remote.
But if you run the remote in UART mode over a splitter, acceleration and deceleration can be compromised, meaning malfunctions could cause an inability to brake. You don't want that while riding.
By running in PPM and UART, malfunctions only affect reading telemetry data, so acceleration and braking are not compromised by splitter malfunctions.
@shotseven I want to run the VX4 and a Davega on my Focbox Unity and it only has one UART. Where can I get a UART splitter from?
Can you help me? I am running the VX4 on my Focbox Unity, and I
I need it to be on PPM so I can use the UART for a screen, but when I try to turn off the board, it will not turn off. If I connect the receiver on UART, the board will turn off. Is there a way to fix this? Maybe the receiver needs a firmware update?
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer
Can't get the speed to show on the remote, have done the software update and tried in UART and ppm. Any thoughts? I'm using focbox tenka as my vesc.
Sorry for the late reply, sir.
Generally, this happens because there is an error in the parameter setting part. If the problem is not resolved, please take a video related to parameter setting and send it to our after-sales mailbox: flipsky-service@outlook.com
Our after-sales staff will solve it for you as soon as possible.
can you connect VX2 pro like shown for UART+PPM?
vx2 no UART+PPM, just vx4
Can I control Flipsky with Raspberry Pi?
May I know what product you want to use with Raspberry Pi
@@FlipskyTech I would like to control flipsky 75100 with raspberry via uart port but don't know if it's possible yet.
@@flyfifly8225 Yes,but need to use Benjamin source code
@@FlipskyTech Can u give me a link?
There is source code:github.com/vedderb/bldc. You can refer to this routine:github.com/vedderb/bldc_uart_comm_stm32f4_discovery