Where does the white wire go to inside the radio? Also, I couldn't find that radio on ebay or anywhere else; would another radio similar to this work? (Hence wanting to know where white wire attached in radio 🙂) Thank you!!!
Can you add the sweep signal generator to any radio? Or just the radio that is shown? Thank you in advance. Also does it come with the wires that are shown? Because I looked this up and the ones I saw didn't seem to come with the wires?
All radios are different. Some can be hacked, other can’t. It’s trial and error. I’ve spend £1000’s on finding hackable radios many of which have ended up in the bin.
No tax to pay. They work with most radios that have buttons to scan up and scan down. Most radios have a mute when stepping between frequencies but most work when stepping between auto stored stations.
It’s not too hard I just finsihed doing mine and it can pretty much be done with any hand held radio, unless it’s a manual sweep. The white wire if you’re wondering connects from the auto clicker (that’s what I call it) to any button such as a forward or backwards button, then red is to power and black is ground. Hope this helps
Don't get what is going wrong Have everything exactly the same as video However When I solder the wire out to the top terminal of the on board tactical click, the off button doesn't work If I mess with it It will scan for a few cycles Then turn off Then turn back on What have I missed? Thank you
I tried this hack and the NE555 board made my batteries so hot. Even when off! What is the cause and solution? I have never had this happen before.
Nice! I wondered how these worked. Appreciate the info.
Where does the white wire go to inside the radio? Also, I couldn't find that radio on ebay or anywhere else; would another radio similar to this work? (Hence wanting to know where white wire attached in radio 🙂) Thank you!!!
www.ebay.co.uk/itm/Mini-Small-Pocket-FM-Radio-Stereo-Music-Receiver-With-Earphone-Lanyard-Portable-/194059053285?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Can you add the sweep signal generator to any radio? Or just the radio that is shown? Thank you in advance. Also does it come with the wires that are shown? Because I looked this up and the ones I saw didn't seem to come with the wires?
All radios are different. Some can be hacked, other can’t. It’s trial and error. I’ve spend £1000’s on finding hackable radios many of which have ended up in the bin.
@@InfrareadyLtd that must be really frustrating. I guess I'll keep trying too, I do only want a few mind for my own personal use. Thanks for the reply
Thank you for showing 👍
got this radio and the generator is there a way to make it sweep the freq. and not only presets ? would be really glad for a answer
Where do you get one I want to hear my dead grandpas or easy e or even big l
Please feel free to email me at infraready@live.co.uk
nice one my friend looks good and easy to make nice ideals thank you
just order ten come to £5.41 .did you pay taxs on urs ? can it be ues on any sort radio .john
No tax to pay. They work with most radios that have buttons to scan up and scan down. Most radios have a mute when stepping between frequencies but most work when stepping between auto stored stations.
@@InfrareadyLtd thank you
@@InfrareadyLtd just come today .order on the 19/12/20 to 04/01/21
@@InfrareadyLtd how much did the parts cost?
@@mehchocolate1257 the price varies depending on availability. The prices have all gone up due to Brexit.
I wish you’d turn it off while explaining cuz it’s hard to make this all out. Lol. All good still enjoy this video very much! Blessings!
Someone in the chat said it could be made easier please if someone knows how to say it
It’s not too hard I just finsihed doing mine and it can pretty much be done with any hand held radio, unless it’s a manual sweep. The white wire if you’re wondering connects from the auto clicker (that’s what I call it) to any button such as a forward or backwards button, then red is to power and black is ground. Hope this helps
Is it possible to place a photo or drawing of the white connecting wire
The white wire doesn’t connect to the screen if that’s what you’re wondering, it connects to any press able button like a forward or back button
Don't get what is going wrong
Have everything exactly the same as video
However
When I solder the wire out to the top terminal of the on board tactical click, the off button doesn't work
If I mess with it
It will scan for a few cycles
Then turn off
Then turn back on
What have I missed?
Thank you
Please email infraready@live.co.uk
Is it supposed to stay constantly on power?
Yes unless you put a power switch inlibe
No se necesita generador para hacer scaneo
Como hago para modificarla sin generador
@@Javi_misterio es muy simple
@@davidguerracalle8676 como ,ya que tengo la misma radio,y al abrirla era una odisea la circuitería,y por internet no he encontrado nada.
Aquí mucho se habla pero nadie sabe modificarla.Dejarse los cuentos de listillos
@@Javi_misterio si quieres te mando vídeos de las que e hecho
Hay otra manera muy simple
Tengo esa radio,cual es la otra manera