@@ahmadansari2547 हीट तो नहीं होता है, मे लगातार काम नहीं करता कि चार्जर फटे जब मुझे टाका लगाना होता है तो मे इसे जभी ही ओन करता हु फिर काम होते ही तुरंत बंद कर देता हूँ
Hey Bro! It will not work more than 3 to 4 days bcoz the pencil lead is made up of Graphite, by passing electric current through it, it will be Oxidized and then lead will be broken.
Its not the electricity that causes it to oxidize. Its the heat. At the temperature needed to be used as a soldering iron, youre basically burning the graphite.
@@joemann7971 But graphite is heating due to the electricity and at an Overcharge Graphite becomes weaken and easily get in Contact with the atmospheric Oxygen and get Oxidized. With such an Oxidization Graphite lead broke into pieces.
@@DJ-dy3ug thats true but the electricity itself isn't causing the damage directly. Graphite and carbon resistors are more or less the same thing. But if you get a 1 watt resistor and run 10 watts of power through it, you'll end up with a similar situation. What he's doing in this video is basically making a DYI resistor from graphite and overheating the crap out of it to make it melt solder.
Bro, Is it safe to try for the beginners at home? Why Negative (-) and Positive (+) don't mix together as Pencil lead is a conductor of Electricity? Please reply as soon as possible!
Yo te digo es seguro no te explotara en la cara jeje ya que + y - no se están tocando entre si si se tocan el grafito comenzará a aser un pequeño corto circuito pero leve mientras nosé toquen todo bien
muito bom, gostei muito pela incrivel iem angola precisamos de ideias como essas para o nosso desenvouvimento e nao so tambem nos leva em lugares em que nunca sonhamos chegar la, muito obrigado pela incrivel ideia.
Sir.I've tried making soldering machine at home but its not working ....would you mind uploading another video....which is simple but true n really works...plz Sir...
(Please resond!) I have 2 questions.. 1st question is, does the type of pencil used matter? And the 2nd question is, do you HAVE to cut the extra wires off from the charger when u tied them together with the copper wires from the pencil tip?
his is using copper wire but when he is connecting copper wire to normal wire he has to remove enamel coating.otherwise current won't pass through copper wire hence proved THIS IS A FAKE VIDEO
@Sameer Anand wo kaha se de sakte hai??? Maine nokia mobile ka charger se current dia Pencil garam ho raha hai lekin grefait se soldering nahi ho raha hai??? Please help me🙏🙏🙏
Who came here for reaparing headphones?😅
Me
😂🙈
Me also
Me
mee'
I tried this with 5v 1.5A charger and it worked well.it heated up within 3 minute and soldered well
Solder wait for hot
Did you use normal phone charger and normal phone charging cables?
Hmm okay hope my home will not blackout
i tried this with 12v motorcycle battery and it turned red hot in 5s
How wonderful! I've learned a lot of tips from the videos on your channel
Bahi it really work I am happy and I give to my bro this gift
When you don't have money but you wanna give your bro a good gift lol
Hey guys I tried it really and it works 😊😊
Mine exploded
It took a little time to get heated
Sure
If your worrying about getting shock just tape the whole pencil except the tip with electric tape 🙂
rytt
Yr right 😇😍😍
An old charger does not produce that much electricity so you don't need to do anything
@@freindlgllama3220 but the wood itself can conduct heating
DC electricity Can't give you any shock 🙄🙄
It really worked for me. The most easiest way to make soldering iron.
How much time it needs to warm up
भाई बना लिया 1 एंपियर एडाप्टर के साथ बहुत बढ़िया काम कर रहा है
Charged fatega nhi bhai
Hit hota hai kya charged
@@ahmadansari2547 हीट तो नहीं होता है, मे लगातार काम नहीं करता कि चार्जर फटे जब मुझे टाका लगाना होता है तो मे इसे जभी ही ओन करता हु फिर काम होते ही तुरंत बंद कर देता हूँ
@@ahmadansari2547 नही फटेगा
4:07 electric board of India
BTW thank you
Very nice my complete this work 👌🙂
Hey Bro!
It will not work more than 3 to 4 days
bcoz the pencil lead is made up of Graphite, by passing electric current through it, it will be Oxidized and then lead will be broken.
Yes. It is only for temporary use
Bro decrease the distance between these wires, it will start heating
Its not the electricity that causes it to oxidize. Its the heat. At the temperature needed to be used as a soldering iron, youre basically burning the graphite.
@@joemann7971 But graphite is heating due to the electricity and at an Overcharge Graphite becomes weaken and easily get in Contact with the atmospheric Oxygen and get Oxidized. With such an Oxidization Graphite lead broke into pieces.
@@DJ-dy3ug thats true but the electricity itself isn't causing the damage directly. Graphite and carbon resistors are more or less the same thing. But if you get a 1 watt resistor and run 10 watts of power through it, you'll end up with a similar situation.
What he's doing in this video is basically making a DYI resistor from graphite
and overheating the crap out of it to make it melt solder.
Thanks🌹 bhai your idea is hundred💯 present work
Thank you!!
I had to use 2 different pencils because the lead broke so much but it works so thx!!!!😄
Kitni der me garam hoti h
Ha kitni der me?
Does it work fo real
Ficou muito bom mesmo❤❤ficou muito bom mesmo
This is what it should be.
This beautiful bearded kid will be able to time travel with technology.
ස්තුතියි
St. McGyver will be proud of you!
Flammable material and high temperature, sounds like a great idea
Shut up nerd
All non metal does not conduct electricity expect graphite logic sahi hai yaar
😎😎😎👍
Camera me ghusa do pencil
Edit: thanks for so much likes for first time
Bhai thodi dur se recording kr liya kro
😂😂
😂😂😂
Ajjubhai free fire
😆😆😆😆😅😅😅
i wouldnt be surprised if i began seeing molecules.
Idiffjfidjfiduif
Right me too😂
Nzz
Gadar film video faltu video
Even atoms too
I am Japanese.Your video is great
Thank you 😊
mera soldering kam kar raha hai bhai thanx❤️😘😘
Thanks
Ficou muito bom mesmo 👏👏👏👍
without pencil🙆♂️👍
Can I use mobile charger instead of adaptor
It won't work
I see many videos they use mobile charger instead of adaptor
nice zoom👍
I bet this man will try to make a plane out of a paper bag next 💀
Gone mad of your channel 😍😘
Why cut the tip, wouldn't it be better
with it being pointy?
Sei un grande,e poi è veloce a saldare,in 10 minuti ľ ho fatto ciao
Can you repeat in English please
Thank you bro...for exploding my adapter
LMAOOOOO 😂
Bien explicado lo felicito desde managua nicaragua
Can you repeat in english please
Bhai 5 v ka charger ha ky ker plz bta reply?
A iron sachme kaam karti hai thank you
Can't I not use adapter and straight away join the wire on my switch board....
Ok🧐🧐🧐🧐🧐🧐🧐🧐🧐🧐
इस तरह से soldring wire पिंगल तो सकता है परन्तु soldring सही नहीं होती है ।
Good work thank you🎉
MADE IN INDIA 🇮🇳 🇮🇳 🇮🇳 🇮🇳 🇮🇳
Made in China ha charger china bc ha
Nataraj company after watching this : meri shaktiyo ka galat istemaal hua h maa 😂😂😂
The Thumbnail Is Very Addictive For Me
I want To Repair My Wired Earphones 😅
Its Agust 2024😶
Good
Bro, Is it safe to try for the beginners at home? Why Negative (-) and Positive (+) don't mix together as Pencil lead is a conductor
of Electricity? Please reply as soon as possible!
10 monthas later...😂
50000 years later😂
100000000000year later
Yo te digo es seguro no te explotara en la cara jeje ya que + y - no se están tocando entre si si se tocan el grafito comenzará a aser un pequeño corto circuito pero leve mientras nosé toquen todo bien
1 year later
It is not working... Even with 18.5 v charger.. please tell me what to do
Wih sangat mantap buat solder dari pengsil
Hey I made this soldering iron with 9volt battery so please tell me that the 9volt battery is OK for this soldering iron
When you use battery there is a possibility of short circuit and fire, especially large Amp battery.
Yes
please don't make this fake soldering iron.Just buy a GOOD one!
Tagra soldring iron
fe zn30
Per
@@mythicalboy3600 u could not even efford this to make.. how can u buy?? 😂
Will it work with 5 V and 1 A charger??
No
De cuanto es el cargador para que trabaje bien como en el video.
Hi watch this CREATE SHADES USING SIERPINSKI'S TRIANGLE AND YOU SMART PHONE th-cam.com/video/DMYn_0uTVB8/w-d-xo.html
@@alejandrogrumas498
~
$ 1🌽🌽🌽🌽🌽🌽🌽🌽🌽
Nais trik you are intelligent 🙌🙌👍👍👍
Wahala for who no get better soldering iron😂but nice one
,🎂
Fantastic 🤗🤗🤗🤗🤗
Thank you
Is take to long to the soldering hot?
25-30 minits
will it work without copper? and just use a wire?
Bhai free fire khelte ho
@@technicalnihar4605 yes i play free fire
Alok he kya
@@technicalnihar4605 do you play ff?
I play
Can we not use alluminium instead of copper
muito bom, gostei muito pela incrivel iem angola precisamos de ideias como essas para o nosso desenvouvimento e nao so tambem nos leva em lugares em que nunca sonhamos chegar la, muito obrigado pela incrivel ideia.
Nice 👍👍👍👍👍👍👍👍
I do this but it is not working
samrudha golpakr
Same
It's patched
Sala chitiya banata hai
You mean did?
Thanks Bro You Helped ☺️ Alot ☺️
Not working 😐🤔😔😠😞
@@ayusharts461 yes I maked after not working😡
Sale cutiya haram four
how much time will it take to melt the wire
almost immediatly
Can I use any wire on pencil
Sir.I've tried making soldering machine at home but its not working ....would you mind uploading another video....which is simple but true n really works...plz Sir...
Now that's a real Pinecil.
No
If then you try
@@harisharis2124 What in the hell are you talking about?
It is real video
🤔🤔🤔🤔🤔🤔🤔🤔
Thank you
no it isn't please don't try this...
We can do this with separate tick graphite pencil lid and with a hard case , as wood can conduct heat. And keep the gap distance more on the lid ....
Thank you 🤓🤓
12 volt 2 amps= 24 watts....i got 5g phone charger hack..5 volt at 3amp =15 watts ...will it work?
Very best Iron soldring
Puri gana video Maine Lagaya Tha police thane Mein jaake report Guru kya
Thanks for this idea
Do we need to use only 12v adapter?
it works better
Can we use 7.5 V
I mean 5.7V
@@shubhkarn2211 do eunogh 4.75v??
Not fake. Excellent work!
I did try it but mine got so hot that it started glowing red and then my entire room smelled like burned wood lol 😂
😆
Voltage too high
Verry nice bro but ye gram kind time me hoga
prakash meena
The
color pencil দিয়ে ঝাল মারা মেশিন তৈরি
color pencil won't work
I am made this soldiering iron it is working . I am used 5v adapter.
super
Soldering iron uses in construction?
(Please resond!)
I have 2 questions..
1st question is, does the type of pencil used matter?
And the 2nd question is, do you HAVE to cut the extra wires off from the charger when u tied them together with the copper wires from the pencil tip?
Nataraj pencil, because the quality of graphite lead used in it works better. Cutting short length of the wire is your choice.
@@Xtra-range 👍🏽 thanks!
save money and make this (this video is helpfull)
Bhai 12v ka charger to nhi h mobile charger h 5v ka usse kaam hoga kya🙄🤔
Bhai mene to 5-5 volt ke 2 charger lga diye fir bhi melt nhi hua..
@@SKSTAR2b sahi kha 😒faltu lgg rha h yeh sb...mera solding garam to ho rha h pr melt nhi ho rha h🤦😔
Bhai kuch alag adapter se Nehi hoga kya
Bhai nahi ho raha
his is using copper wire but when he is connecting copper wire to normal wire he has to remove enamel coating.otherwise current won't pass through copper wire hence proved THIS IS A FAKE VIDEO
You are right , he is making fool us
Maybe it is not insulated
You are fool
12v 2.0A adaptor only use or we use anything
Legends are see in comments 🤣🤣🤣🤣
Yaa bro
Ultra legends are see in the bed of grammar's mommy doing aah oohh.
Janu & Jaadu ultra legends .
Hi there CREATE SHADES USING SIERPINSKI'S TRIANGLE AND YOU SMART PHONE th-cam.com/video/DMYn_0uTVB8/w-d-xo.html
Yes bro
Nahi huva mera
Pencil heat ho gai lekin kuchh soldering nahi ho raha hai????
Kya kare please reply me as soon as possible🤗🤗🤗
@Sameer Anand wo kaha se de sakte hai???
Maine nokia mobile ka charger se current dia
Pencil garam ho raha hai lekin grefait se soldering nahi ho raha hai???
Please help me🙏🙏🙏
@Sameer Anand ha
Pencil heat ho rha hai
Lekin soldier nahi ho raha hai
👍👍👍👍👍👍veri nice
When I will apply with 12volt battery 🔋 the pencil lead has blast
Lol same here
Allahuakbar mashallah mission accomplished
same
Bro will you please say me what materials you used to make soldering iron
Hi
Can i use output-5v ,750 mA
No
Really he is working
Thx so much it workd.your the best.I did burn my fingure alot tho XD
Be careful when you work with this kind of things
@@Xtra-range Be careful when you post this shit its a perfect short circuit and will blow the power supply up
Bhai ye to work kar gaya
Switching Sdapter Model:Dsc-12 FEU 120050
Input:100-240V-50/60Hz 0.2A
Output:+12-_0.5A
Vai eta diye hoybo ni......?
Nice things I also make at home it is working thing
Hi watch this CREATE SHADES USING SIERPINSKI'S TRIANGLE AND YOU SMART PHONE th-cam.com/video/DMYn_0uTVB8/w-d-xo.html
Which adaptor sir?
Pls tell low cost adaptor or if I directly plug in the wires to socket (jugaad) then it will shock or not
Use ya brain start small eg 5v 500ma and don't be dumb and wire it to mains you will have a fire 🔥
Maybe start with battery's first
Who else just breaks the tip of pencil
Now they will not break the lead of pencil
😂
Go watch this CREATE SHADES USING SIERPINSKI'S TRIANGLE AND YOU SMART PHONE th-cam.com/video/DMYn_0uTVB8/w-d-xo.html
Best Idea only ₹ 5
This is 100% true video.
Eu acho muito legal o seu canal e aprendi várias coisas
Круто
मेरे charger में blast हो गया
Charger को open किया तो पता चला कि charger के अंदर का capacitor ही फट गया
लेकिन soldering नहीं हुआ ।
Omg Thx
Worked trik good luck
Can we use charger also
Bhi yea kam nahi karta
Bhai iSe garm Hone Tak rakho fhir kam krega
Can you repeat in english please
@@Xtra-range hlo
@@Xtra-range it is not working
@@Xtra-range yes
This project is not working
How much time will it take
Yes yes sir i did it its work thanks so much sir
Really work aa
Hey you will not coming to online class why ,yes it worked
Tq
Hey why u are not comming to online class.