DIY Soldering Iron from PENCIL
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2022
- In this video I show how I turned a pencil into a temporary soldering iron. It works because the graphite of the pencil is conductive. When a current passes through it, it heats up enough to melt solder. This project is for fun and educational purpose (or if you really need to solder something) but the pencil won’t last more than a few solders.
I wore safety glasses the entire time and I would not have even thought to attempt this without wearing them.
It took a long time to film and edit, please considering subscribing if you enjoyed it!
Tiktok: madeyoumake
Instagram: madeyoumake
TH-cam: madeyoumake - แนวปฏิบัติและการใช้ชีวิต
Please consider subscribing if you liked the video! ❤
Its a truth
Да врут они не работает она
Дьидь
Всем доброго времени суток :)спасибо автору за его идеи и мастер-класс по изготовлению этого паяльника!!! 👍👍👍👍 только что закончил сборку по Вашему видео. Полтора часа затратил. Три раза грифель обламывал на этапе нанесения углублений под провода... В итоге я всё-таки смог!!! Всё получилось!! Работает шикарно!!! Моя первая в жизни самоделка)))) спасибо за всё)))
You also here in 2024😭🙏🏾
This is super amazing
I didn't try but could be cleaner to weld with the opposite head of the pencil.
In that case you can also re-sharp the edge if it gets consumed or damaged (maybe I'm wrong and it won't work).
يتسفسغس
Me encanta 👍👍👍👍😲😲😲😲🤯🤯🤯🤯 te felicito 👍👍👍
Cool👍👍
That's actually amazing the way it works.
Lekej
Te sirve?
A forces has to have what goes on the tip at the end of finishing it?
Yes it's working
Thanks very effective method
Bhi charger jl to nhi ji ga
OMG ITS WORKS SO THANK❤❤❤❤
Te funciona a ti?
WOO 😊
Is that one time use? Coz mine didnt work after one time used🙃
I think the copper wire burn
"safety goggles are needed"
So when you blow the house you don't hurt your eyes
Just kidding 😀
I did the same, look how it turned out for me
best video boss
Can use other pencils except HB?
It's safety or danger? I need this and i don't have heat shrink tube
Then use tape because it is not mandatory
Op thanks for this video❤❤
Bhai charging kitne woltej ka he
Pls reply 🙏
I make the same thing and it's getting to hot but when I want like to solder a resistor or a capacitor it didn't solder the iron from the board why
I used a 12v 1 amps charger
The voltage is too high it might have melted some plastic on the copper wires. It only works with a 5V charger. It could also be that the wires aren’t wrapped tight enough around the pencil. Also it needs to be a HB pencil. And you have to wait a good minute for it to heat up.
@@madeyoumake ah ok thanks 👍 you so much
This did with too large of an output and the graphite exploded, 10/10.
👍👍👍👍👍
Very cool ❤️❤️❤️
From a pencil you have turned it into an electric soldering iron, with many very useful effects, it's too great to do at home.
How manny amps is the adapter??? Is the pencil hb? Mine stuffed up. Also the wire went red hot. Also lead smoke is Toxic so be careful peeps.
12volt adapter 1 or 2 amps pencil is hb
Amazing!
❤❤❤
Cool. Now these are the videos i like😁
More to come! :)
cool❤❤❤❤
A ponta do lapis ela acabar?
can the block say 9.0V - 1.67 A or 5.0V - 2.0 A?
I will sub 👌
Sending support idol
Agli baar power bank banana😊😊😊
🎉🎉🎉
Does it work if my iput is 5V 1 Amp? instead of 2 Amps
Yes
🎉🎉🎉🎉
Which type of pencil did you use.
graphite pencil
Funciona con cualquier lapiz
නියමයි
😮
4.8v would do fine right?
Yeah that should be pretty similar!
@@madeyoumake OK I'll try
Does it really work pls answer as i am trying it for my school project
It does trust me
Vgood 😊😊
Good
I try to make it but it doesn't work why
Usually when it doesn’t work it’s because of a loose connection. Make sure the wires are wrapped around tight. You also need to leave it turn on for about a minute to heat up! Keep testing to solder every few seconds and eventually it should work!
wao
Can i use normol mobile charger??
Do I need to use a copper tube for it to work??
Nope it works with just a pencil :) It lasts longer with the tube though!
@Made You Make Thanks man and can I also use colour pencils because I got no normal pencils
@@Cliker_cookie_1999 no it has to be normal pencil colored pencils will just do nothing
Can we use copper wire
Is this safe ?
Bro ye koi bhi charger me work kare ga
I don't understand what you wrote
I love you.❤
can it shock me? electrically?
does it take time to heat up?
I don't know.reply
Yes
@@r.ordinary189 ok thx
um no electrons are normally hot it will get hot instantly
My wire cable becomes to hot whenever I use it
I will try it if it works i will come with feedback
A forces has to have what he put at the end?
Good tricks bro osam
Que pasa si lo hago con un output 12.0 v = 1.0A
12v is too high try 5v
I can use 9V - 1.67 A?
Nope that’s too much it will overheat and melt/spark
100% 5v DC
3:05
is it possible to use a 2H pencil?
Yes you can
Hi can this Soldering Iron melt 2 bits of metal together?
It's not that powerful unless the metals you are talking about have a very very low melting point.
good
Work?
i follow the steps and this is hot but it not dissolving the solider (the wires are connected properly)
Are you sure you’re using a HB pencil? Different grades have different conductivity
@@madeyoumake this HB-2 thats what written on the pencil...
How is the pencil not on fire?
bro that true and i make that in a second but my dad said it's broken so i use one with that
Why mine not work it just heat up a bit even after 5 minute
Depends on the graphite in the pencil. Try a different kind of pencil. Some graphite is more resistant.
Can I use a screw instead?
لااا
@@user-lk9co2dv5m ليش؟
Its so cool but why safety goggles are needed?
If the solder pops up at your eyes it would hurt alot lol
Thinks I will tray Inchalah
Mine cable has 4 wire inside it what do I do? It has white, red, green, and black
Red is + and black is -
Green and white are signal transferring wires
@@thesniperofcs just snip the green and white wires as if you where making wires to recharge nic
Red and black
O meu não funcionou 😢😢😢😢
Oldu ısınıyor
why it does not work?? i am use old usb cable (i did open this cable and used red and black) and pencil HB-2 . and connected to my lapptop then im wait 5 minets then nothing happend .... i need help please
Dont try plugging it into a laptop
What if the cable has four wires
Black and red wire is right
هل تتوقعون فكره ناجحه
مرة سويتها بس مو ساخن جدا
مس به سرمداد زدین؟
Show de mais
You are my boy
How it's true?
Because the battery was hooked up to itself so it made a hot surface that can be used for soldering. If the wires are wrapped around each other though, you get a welding tool.
Kya ham ise 220 volts mein Laga sakte hain
Bhai agar swarg mei jaldi pahuchna hai to try kar skte ho..😂
Как ножик называется?
Quanto tempo leva para a ponta aquecer
It should take about 1 minute
Please do not put it into the socket without an adapter..
𝖬𝗎𝗒 𝖼𝗁𝖾𝗏𝖾𝗋𝖾😮
¿ I can use one of 5v - 1.0 A ?
Yep! As long as it’s 5V! :)
@@madeyoumake ok thank :D
Bro melt nhi kar rha
Bro mere wire me kuch alag hi colours ke wire hai or 4 wire hai 😅
Good tutorial looks like it works from others comments but when I made it, it basically exploded 😢
How many volts and amperes did you power the cable with?
Super bawth
Se puede hacer 🔋 pila
Salut c'est comment comment va faire pour jouer
💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓💓
چرا سیم من چهار رشته دارد؟
Dont use white and green use red and black
Điệu nhảy cầu Chương Dương
My led broke on the last step 😢 lol