What I love about your PID related videos is how well and clear you mention characteristics we should expect, avoid, or aim for. Thanks for the quick video and looking forward to trying this quick tune for 4.5 soon!
Hi Sir !!! May i ask can i use this method to pid my Mo8(O3)? Because before O3, i use vista Runcam, it fly perfectly but since i sw to O3, its a lil bit weak for O3?????❤❤❤
I have problem twitches when turn left or right.. short flight time.. Someone can help me? Quad 3 cinewhoop 3 inch Using neutronrc mini aio 45A Tmotor 2203.5 2850 kv Lipo 6s 1050mah
@@musicloh1693 unfortunately there is no super simple for filters. Filters take blackbox, a good understanding of what the different filters do, and also trying a bunch of things that may not even make a lot of sense but end up working well.
Can you show us how you set up your controller in Betafight? Mine for some reason does not control the drone and does not seem to be doing anything in Betaflight either when I move the throttle
Hi, Can you explain Modes without Air Mode. new Horizon mode and Acro Training mode has too much different. I'm trying power loops with Air Mode disabled Horizon mode, but its so confusing. im not able to configure acro mode on 4.5.
Can you confirm if the FC you are using is a betafpv F4 1s 5A ELRS (serial) bmi270 gyroscope? I have one of these and the code on betaflight is the same, the pids available on the betafpv website are relatively good, I want to see if I can improve
Light 3 inch is probably even simpler. Leave the pitch sliders at 1 and the rest probably still applies fairly well. You may not need as much D, try that slider at 1 as well.
Good stuff. It is just that simple! Sliders make it very easy.
What I love about your PID related videos is how well and clear you mention characteristics we should expect, avoid, or aim for. Thanks for the quick video and looking forward to trying this quick tune for 4.5 soon!
Let us know how it goes.
No nonsense guide for a %90 tune. This is a huge contribution to the community. Thank you!
Cheers!
Great vid...getting more into tuning with 65mm custom builds!
Great simple setup with default filters. Like Mark said, sliders, FTW!
Thank you for this simple guide! I’m looking forward for a more complex also
Ace, improved my flight time massively. Thanks for this, cheers🎉
Thanks, this helped a lot. I hope I can learn more about tuning through these simple processes. Looking forward to the next video on this topic
Hi There
tried this on my 1s whoop build and it flys great, now I'm waiting on complete 4.5 tuning video
thanks for all the help
Nicely explained! Well done quad66 :)
im having a lot of trouble tuning the 1s fpv cycle tp3 but im too lazy to figure out why the filter analyzer thing doesnt work sigh
Very helpful, thank you!!
Glad it was helpful!
Hi Sir !!! May i ask can i use this method to pid my Mo8(O3)? Because before O3, i use vista Runcam, it fly perfectly but since i sw to O3, its a lil bit weak for O3?????❤❤❤
Would you say this applies to a 30g digital (hdz) whoop w/40mm props 75mm spacing?
Kind of I'd say... The master multiplier has to be lower the bigger your motors are. Especially with 1002 or bigger.
I have problem twitches when turn left or right.. short flight time..
Someone can help me?
Quad 3 cinewhoop 3 inch
Using neutronrc mini aio 45A
Tmotor 2203.5 2850 kv
Lipo 6s 1050mah
great video, what about filters ?
@@musicloh1693 unfortunately there is no super simple for filters. Filters take blackbox, a good understanding of what the different filters do, and also trying a bunch of things that may not even make a lot of sense but end up working well.
Can you show us how you set up your controller in Betafight? Mine for some reason does not control the drone and does not seem to be doing anything in Betaflight either when I move the throttle
Hi,
Can you explain Modes without Air Mode. new Horizon mode and Acro Training mode has too much different. I'm trying power loops with Air Mode disabled Horizon mode, but its so confusing. im not able to configure acro mode on 4.5.
Can you confirm if the FC you are using is a betafpv F4 1s 5A ELRS (serial) bmi270 gyroscope? I have one of these and the code on betaflight is the same, the pids available on the betafpv website are relatively good, I want to see if I can improve
Thanks👍👍👍
this is only 65 and 75mm and ductedes only? or can i use same technique with lets say 3 inch toothpick?
Light 3 inch is probably even simpler. Leave the pitch sliders at 1 and the rest probably still applies fairly well. You may not need as much D, try that slider at 1 as well.
@@Quad66 thank will try! what about filters? just leave it defaults?
Thank you so much :)
cheers