Watch as the mm1 tackles this gx120 starter with ease! This repair covers a vast number of engines makes and models. Links below for parts used in this video. Thanks for watching and subscribing! Have a great Tuesday! Honda GX120 GX140 GX160 GX200 GCV135 GCV160 GC160 New amzn.to/2QMj9do GX240 GX270 GX340 GX390 REPL OEM 28442-ZE2-W01 amzn.to/3ehlTZ1
I have a Champion Generator 196cc that has a very similar but smaller recoil starter that probably needs a new spring or at least a new recoil starter assembly. I’m so glad that you posted your video because I was wanting an inside look of what I may be facing. So I guess that the Predator engine starter recoil is probably the same one as the Honda’ engines use. Best Regards From Rainy Stormy Central Ky.
How do you get the pull cord and the tabs to go in the same direction. I recoiled the spring and must've put the cord in erong. The pull cord goes counter clockwise and the tabs come out clockwise. How do I fix this problem. Been trying to fix for a week now
I hate working with those starter springs especially on the small 2 cycle starters. Thanks for the tips Jeremy. Hope you are doing well and didn't get any storm damage.
started on my Westinghouse 3200 psi press. washer. Recoil taken out....spring rewound...but could not get it set because plastic was broken. 93 degrees....76% humidity...hungary...wife's dawg yappin'...E-bay...30 bucks. Plastic is used on the most dumb areas of wear and tear.
Went through a few different videos looking for what seemed to be impossible, I couldn’t figure out for the life of me why there was no tension on the pulley (Recoil Starter) after removing retainer spring a few times, I noticed the spring (Starter Return) had to be placed in a certain place, thank you 🙏🏽
I tembet how many tines repairing are rope Starter on are Nclane with 2.5 hise Powet briggs and Stratton And are Jing o Lawn edger with same Type. And even have to buy a tabg adapter when the hild down Tabs broke off
Great video! I am trying the same thing on a Honda F210 (tiller), and that is driving me nuts. No holes to insert a pocket screw driver and even before reaching that point, the spring won't stay after I put it in. Any ideas?
i have the same issue with a echo top handle chainsaw. the recoil kept doing the same thing as in the video. i replaced the spring, it retensioned and then it did the same after a few pulls on it. the new spring was bent when i took it apart again. any idea whats causing this?
This video was perfect - My coil spring had come unhooked and I was struggling to get the spring back in - your video was just the ticket to show me how to do it and now I have the recoil working perfectly!
Watch as the mm1 tackles this gx120 starter with ease! This repair covers a vast number of engines makes and models. Links below for parts used in this video. Thanks for watching and subscribing! Have a great Tuesday!
Honda GX120 GX140 GX160 GX200 GCV135 GCV160 GC160 New
amzn.to/2QMj9do
GX240 GX270 GX340 GX390 REPL OEM 28442-ZE2-W01
amzn.to/3ehlTZ1
i know I'm kinda randomly asking but do anybody know a good site to watch newly released movies online?
@Maximus Winston i watch on FlixZone. Just google for it :)
@Maximus Winston I watch on flixzone. Just google for it =)
Amazing simple when you explain things the way you do. THANK YOU!!!
Not as hard to do as people (customers) think!
Done this many times at work . Got the same Stihl screwdriver just for doing this also..
Very professional. I learned a lot by watching this. Thank you
Thank you I always end up with string hanging down after I replace the string. Man I wish you had a shop here in Sacramento
I have a Champion Generator 196cc that has a very similar but smaller recoil starter that probably needs a new spring or at least a new recoil starter assembly. I’m so glad that you posted your video because I was wanting an inside look of what I may be facing.
So I guess that the Predator engine starter recoil is probably the same one as the Honda’ engines use. Best Regards From Rainy Stormy Central Ky.
How do you get the pull cord and the tabs to go in the same direction. I recoiled the spring and must've put the cord in erong. The pull cord goes counter clockwise and the tabs come out clockwise. How do I fix this problem. Been trying to fix for a week now
10:56 this is Rene.
I just watched this video.
And i love it. Thanks for doing videos like this.
Another great video by the MowerMedic!👍
The psrt number for starter Dawg? An pressure spring?
Good video and explained well
Does it go back a current way once you put it back mines gets stuck when I put it back on the fly wheel
I hate working with those starter springs especially on the small 2 cycle starters. Thanks for the tips Jeremy. Hope you are doing well and didn't get any storm damage.
But wear goggles when you are dealing with compressed springs, or it could be goodbye eyes.
Thank you for the informative videos
Is this worked on all mowers, this process on your rewind
Basically same
started on my Westinghouse 3200 psi press. washer. Recoil taken out....spring rewound...but could not get it set because plastic was broken. 93 degrees....76% humidity...hungary...wife's dawg yappin'...E-bay...30 bucks. Plastic is used on the most dumb areas of wear and tear.
Why does my spring keep coming off the catch ?
Went through a few different videos looking for what seemed to be impossible, I couldn’t figure out for the life of me why there was no tension on the pulley (Recoil Starter) after removing retainer spring a few times, I noticed the spring (Starter Return) had to be placed in a certain place, thank you 🙏🏽
My recoil starter reel is solid no slots how do I replace the rope?
Thank you. Your video made a mechanically challenged lady's job do'able, even easy!
Ha! my spring was not broken but had disengaged from the tab. Thanks for this. I am back on track out here in my offgrid building project!
You make this look so easy. Great video!
I tembet how many tines repairing are rope Starter on are Nclane with 2.5 hise Powet briggs and Stratton
And are Jing o Lawn edger with same Type.
And even have to buy a tabg adapter when the hild down Tabs broke off
Brother, thank you!
Great video! I am trying the same thing on a Honda F210 (tiller), and that is driving me nuts. No holes to insert a pocket screw driver and even before reaching that point, the spring won't stay after I put it in. Any ideas?
i have the same issue with a echo top handle chainsaw. the recoil kept doing the same thing as in the video. i replaced the spring, it retensioned and then it did the same after a few pulls on it. the new spring was bent when i took it apart again. any idea whats causing this?
Great video - thank you. I was told this old machine could not be fixed by a repair centre but thanks for your help, I’ve managed to do just that!
This video was perfect - My coil spring had come unhooked and I was struggling to get the spring back in - your video was just the ticket to show me how to do it and now I have the recoil working perfectly!
Here I was trying to make it into a spool first instead of putting hook on first then make it coil. Smarter nit harder. Thank you good sir!
Thanks man. Helped me out a bunch✌🏽
Perfect video. Thanks
Cool stuff. Texas strong 💪
Great video Thanks
Thanks for sharing.