Hi.. I saw this video when I was doing research prior to purchasing. When mine was delivered, it had the same stiff belt magazine. Having watched many reviews, I couldn't remember which video had info that seemed to solve the issue. After watching a bunch, finally found yours again. Thanks for a well presented informational video.
Glad to hear you found the video useful. I hope you enjoy the Glock too. With a bit of silicon oil from time to time mine is still a great gun to shoot despite conflicting anecdotes from other owners. I’m really pleased with mine. Thanks for watching.
Thank you for your video. I trusted Umarex, and yesterday without any research I bought this gun in a shop. I regretted it a moment after I unpacked at home. This pistol is a failure, at least mine. Firstly, there is no room for a finger, the trigger is pushed so forward far and the safety fin is sharp and often gets stuck on the trigger almost injuring the finger. The trigger works very very hard. The trigger always works in double action, needs haf inch of travel, regardless of whether you manually reload or not. Yes, you can use the trigger after partial relase, after shoot/ reset, in single action mode, but then pistol does not rewind the magazine and does not feed the new pellets into the barrel, it gives then a blank shot. When the magazine is empty, the slide does not remain open. A threaded barrel with such a trigger will not improve accuracy at all! The first two or three shots from the new CO2 cartridge are really very strong, even over 150 m/s (490ft/s), then they drop to 90 m/s and and finally after 12 shots pelets leave barrel at about 60 m/s (197ft/s) .Who designed it and why? Waste of time and money. Shame on Umarex.
It behaves just like my Sig X-Five so I put decent amount of Silicone and turned the belt for about 3-5 minutes and what a nice difference,no jamming,shifts smoothly and it did lighten the trigger..Silicone lube is The King and gets you out of trouble 😈…
Good to have you back, been missing your vids. When I purchased my gen 5 my gun dealer provided a bottle of silicone oil for the mag. Happy new year to you bro
Dude im so glad you and your black gloves are back again with an awesome review. Nice gun but i gonna pass on this one and stick to my Umarex gen4 bb, I love it and have had zero issues with it out of the box🔫👍
Another insightful video and very helpful to boot. I recently purchased this pistol and the trigger was almost too stiff to pull. Following your advice I've spent some time oiling and rotating the chain mag and it works a treat now. So much so that I've done the same with my Walther PPQ M2, the performance of which is also much improved.
@@airgunreplicas77 It’s impressive. A bit of a beast, very chunky in the hand. It’s obvious you’re dealing with a top-tier product. And to be fair, the mag was much better ‘out of the box’ than the Glock. I’ve got a few Walthers, and if I’m honest my favourite is the CP99 Compact, but I love that compressed, tactical aesthetic (the Glock 19X and 3.8” Springfield XDM are incredible). In contrast the PPQ M2 feels a bit indulgent, but you can’t argue with that heft and quality.
@@user-ts3tl1xw7x You may have just cost me the best part of £200! I love my t4e ppq m2 in .43 but I’m thinking the .177 version may well be a part of my future…
You can also use Jack oil you can use any oil that goes around to seal that doesn't crack or rot it doesn't lock back on last shot but you can pull it back and lock the slide back it'll go up
Stay with the Diabolo Basic 17.0 gr .177 pellets (flat nose). The domed pellets tend to jam and one can unknowingly damage (crack) the feed belt as well as weaken belt advance mechanism of the pistol. Re: The Slide - Yes, it's just you. The slide does lock back.
It is important to point out that the slide release does not operate automatically after the last shot BUT you can lock trübseligem back with it manually. You just have to press a bit harder and then it „clicks“. Over time it gets easier.
Mine is the same as the one in the video. It does not lock back manually. Checked with the retailer and they say that on some of the guns the “notch” is not big enough to allow it to lock. I have seen some videos where it does, others where it doesn’t 🤔
I really appreciate your video. You actually discuss in full the only big problem with this Glock. The 12 pound trigger pull. I did lubricate the belt by removing the steel plate covering the innards. It didnt seem to make much difference but after watching your video I will try it again. I like the Glock, but the trigger pull is a killer for me. One other thing. Its odd how the markings on the frame and barrel are different. I guess that goes from country to country. In Canada there is no 4,5 mm mark on the barrel. Also the other markings are different with some info numbers missing. No 9,9mm on mine. The other thing is the safety slide. It takes a plastic tool to force it off and on. You sure cant do it in the field without that tool.
I have the exact same mag in an Umarex Walther PPQ. Nice quality build but has the same problems you have mentioned with the mag. My observation is that both sides of the belt, once inside the pistol, will drag on the walls of the channel that the mag sits in, preventing it from properly cycling. Hope this helps anyone who has one of these mags, either Walther or Glock.
Nice pistol 🔫, I have heard about belt problems and jamming,still my favourite is Glock 19 NBB,for pellets I use Sig P226 or Crosman Vigilante but for some reason I want to get Crosman Night Stalker..Possibilities are endless and I love ❤️ air guns of any kind…
I figured out the pellets get bent in this type magazine configuration. The back gets dinged going around. Once this happens toss the pellet this is causing the jam when one is loaded in being bent
Hello , muy buen video explicado , yo tengo todas las glock y la 17 5 gen el carril se bloquea en el ultimo disparo ( es de bb en diábolos desde luego no ) ) yo por realismo me decido por la 17 gen 4 es la mas realista. desmontaje lubrificacion etc etc la de diabolos no me gusta el despiece y que al final de las rondas no se bloquee la corredera , prueba power y precision , saludos desde el mediterraneo , muy very very presentacion video.
so the only difference between gbb (green gas) and co2 version is the front cocking serrations?? the co2 version has both front and rear while gbb has only in the rear
Lots of detail that I think you took too long to spit out and it should've included a demonstration of shooting it at target to show the accuracy or not an over chronograph. Mine arrives tomorrow and I'm mounting a Sig Romeo 0 reflex sight on it. I have the Romeo 0 on the 43 caliber version of this Glock 17, GEN 5 and the thing that I like about the Romeo 0 and the single reason I selected it was that it's got the shake week on and off
The rattle of the slide is really the worst and it doesn't feel crunchy at all when you rack it. The rattle part is fixable however. Otherwise the gun is pretty good. The Gen4 design with Gen5 internals would have been great, but for now we have to choose between a great replica Gen4 that suffers from low shots and a Gen5 with that shoots well with bad haptic.
I've had a lot of trouble with My new Gen 5 while trying to shoot pellets. I was told to use BBs instead but if I had wanted a BB pistol, I would have bought a Get 4. At the moment I am shooting BBs to see if moving the magazine cassette loosens it up a bit and allow pellets to be shot.
Personally I wouldn’t shoot bb’s through it. It’s not designed for that and you could damage the rifling in the barrel. Lubricate the belt in the mag with silicone oil and that should significantly improve things.
Not personally much for Glocks (own two though) - but I definitely want the Walther Q5 Match beltfed pellet shooter. And I'd definitely do my work on the mag n belt prior to shooting it. Good video! 👍🏻👍🏻
Another great video buddy ! Lubricating the belt is a 'pro' move, it's got to be done as it does help with both the magazine belt rotation and lightening the trigger pull. It doesn't look like the slide fully reciprocates like on a BB version Glock though, maybe it's just me. Shame about the no lock back on last shot though, seems a shame too that it doesn't field strip like the real steel version either (or the BB version Glocks).
Thanks mate. Yes there are some limits when it comes to it being an authentic, full function replica. That said, it has really grown on me since the problematic ‘teething stages’
@@UKpitbull No it just comes in a standard Glock cardboard box more like the bb versions. I think the pellet/bb dual ammo Gen 4 does come with a hard case.
That’s strange that your slide release doesn’t catch, I’ve seen most of them that do, mine definitely does. So my guess is it’s just the early ones that don’t, and they tweaked the models more and more. Like any other company
Mine was a bit stiff at first but then I figured out that you have to push it upwards and slightly to the left after pulling the slide back as far as it will go.
If the flashlight fits a standard picatinny then you should be fine but I haven’t tried myself so can’t be 100%. It’s not red dot ready so you’d need a bracket I think.
Does anyone know how the slide "racking" of the Umarex Glock 17 gen 4 compares to the real Glock 17 gen 4 or 5 slide rack? the spring is so stiff on my real 9mm Glock 17 gen 5 that its hard to slide rack the gun normally. I want it to be easy and smooth and not take alot of power as my hands do hurt now from some arthritis.
Mine don't lock too... And my retailer purchased a second one in the same time, and it didn't lock too So it look like they're some of them that are not properly machined
Umarex have changed the chain belts on the Glock Gen 5 pellet magazines, bagnall and kirkwood have the new white belt kit as a spare, supposedly it's more robust as I think they've had some complaints regarding wear to the belts after shooting with this and the PPQ M2. I'm not sure if they have started putting these in the new batches of the gun or made the new belts for the PPQ M2.
That would be genius! I'll have to look around for those other belts. The white plastic belt in my 21-month-backordered PyramydAir-delivered Gen 5 is very, very stiff (gets better after sitting in warm water but who has time for that!) and also wound *extremely* tight around the 2 pinwheels inside the magazine -- so much so that the backward tilt of the belt toward the top end of the magazine (I think) restricts the motion of the pinwheels around the middle pin (?) they're supposed to rotate around, no matter how much silicone oil is slathered on. I suspect the best solution is another type of belt.
It can’t blowback without co2 as it’s the co2 that provides propulsion for the ammo. It then simultaneously channels some co2 to push the slide back to replicate the action of the actual firearm.
Yeah. Too expensive for my tastes. Happy with my .43 Walther which is much cheaper. Would consider the M&P in .43 too as I love the style of those guns.
I’m afraid I don’t know mate. I don’t think these are field strippable (as in you’re not able to easily take them apart by hand without using a device or tool) Are you able to shoot the pellet out with a fresh co2 capsule maybe? Just be careful and make sure you’re aiming in a safe direction whatever you try.
I've just bought a GLOCK GEN 5. Exceptionally good weapon. Had no jamming yet, but thanks for the advice with the Silicone Oil. Most idiots would use WD40. 👌👍
The p320 mag is similar, in that it is belt fed also, but this is a slightly different system with a 'rubber' belt, rather than the hard plastic one used in the Sig p320, X5 and M17.
Sorry if I’ve misunderstood but I’m struggling to translate this. I think you’re asking if the magazine from the Gen 4 will fit this Gen 5. The answer is ‘no’. This Gen 5 uses a really specific type of magazine so neither the ‘Gen 4 bb’ or ‘Gen 4 dual ammo’ magazines would fit. I hope that helps to answer your question. Thanks for watching!
In the official video presentation of the gun that dude Mark shows us that the slide DOES lock back, this is the only fu...n reason i bought it !! Well actually it does not, the slide button does nothing, another fraud from umarex thanks.
Just watching this after searching for the new umarex offerings for 2023… seems to be nothing new in replica market ( even legends) ? Disappointing to say the least!
This review is way too long. For a 30+ minute production it should contain shooting and spec info as well. You should do a rehearsal, take notes and then repeat. It's not just you - most of these gun reviews need to heed the same advise.
Do not buy this. I own it and magazine is crap and belt broke right of after firing about 100 rounds. There is a better gen 5 modell with a spring loaded magazine its better in all ways.
*DO NOT BUY THIS GUN, I BOUGHT THIS A WEEK AGO BRAND NEW AND THE INTERNAL MAGAZINE ROTATION PART HAS GONE LIMP AFTER 200 SHOTS! THESE ARE NOT WORTH THE MONEY GUYS TRUST ME*
Sadly not. Due to the belt fed mag and the way the gun operates, there’s no way for the slide to ‘know’ that the mag is empty. It’s the same for all pellet guns with rotary or belt fed mags.
Hi.. I saw this video when I was doing research prior to purchasing. When mine was delivered, it had the same stiff belt magazine. Having watched many reviews, I couldn't remember which video had info that seemed to solve the issue. After watching a bunch, finally found yours again. Thanks for a well presented informational video.
Glad to hear you found the video useful. I hope you enjoy the Glock too. With a bit of silicon oil from time to time mine is still a great gun to shoot despite conflicting anecdotes from other owners. I’m really pleased with mine. Thanks for watching.
Thank you for your video. I trusted Umarex, and yesterday without any research I bought this gun in a shop. I regretted it a moment after I unpacked at home. This pistol is a failure, at least mine. Firstly, there is no room for a finger, the trigger is pushed so forward far and the safety fin is sharp and often gets stuck on the trigger almost injuring the finger. The trigger works very very hard. The trigger always works in double action, needs haf inch of travel, regardless of whether you manually reload or not. Yes, you can use the trigger after partial relase, after shoot/ reset, in single action mode, but then pistol does not rewind the magazine and does not feed the new pellets into the barrel, it gives then a blank shot. When the magazine is empty, the slide does not remain open. A threaded barrel with such a trigger will not improve accuracy at all! The first two or three shots from the new CO2 cartridge are really very strong, even over 150 m/s (490ft/s), then they drop to 90 m/s and and finally after 12 shots pelets leave barrel at about 60 m/s (197ft/s) .Who designed it and why? Waste of time and money. Shame on Umarex.
I also have such a Glock and exactly the same problem, sent it back to Umarex to have a look at it, got it back but exactly the same - it's rubbish
Think the Sig is a better deal
That's sad, hopefully that was just a defective run, they usually make great products, or at least used to
It behaves just like my Sig X-Five so I put decent amount of Silicone and turned the belt for about 3-5 minutes and what a nice difference,no jamming,shifts smoothly and it did lighten the trigger..Silicone lube is The King and gets you out of trouble 😈…
Good to have you back, been missing your vids. When I purchased my gen 5 my gun dealer provided a bottle of silicone oil for the mag. Happy new year to you bro
Ah sounds like a good guy! Thanks for watching mate. Happy. New Year!
Thank you sir for sharing this video, I will start with lubricating those spots as you showed here when my pistol arrives
Dude im so glad you and your black gloves are back again with an awesome review. Nice gun but i gonna pass on this one and stick to my Umarex gen4 bb, I love it and have had zero issues with it out of the box🔫👍
Ha ha! Thanks! Yeah, you can't go wrong with the Gen 4 bb version. Solid and reliable. Thanks for watching!
Another insightful video and very helpful to boot. I recently purchased this pistol and the trigger was almost too stiff to pull. Following your advice I've spent some time oiling and rotating the chain mag and it works a treat now. So much so that I've done the same with my Walther PPQ M2, the performance of which is also much improved.
That’s great to hear. How do you find the Walther? I’m very interested in it due to my happiness with the Glock.
@@airgunreplicas77 It’s impressive. A bit of a beast, very chunky in the hand. It’s obvious you’re dealing with a top-tier product. And to be fair, the mag was much better ‘out of the box’ than the Glock. I’ve got a few Walthers, and if I’m honest my favourite is the CP99 Compact, but I love that compressed, tactical aesthetic (the Glock 19X and 3.8” Springfield XDM are incredible). In contrast the PPQ M2 feels a bit indulgent, but you can’t argue with that heft and quality.
@@user-ts3tl1xw7x You may have just cost me the best part of £200! I love my t4e ppq m2 in .43 but I’m thinking the .177 version may well be a part of my future…
@@airgunreplicas77 Let's be honest. In an ideal world, which replicas aren't part of our collective futures?
😂 very true!
You can also use Jack oil you can use any oil that goes around to seal that doesn't crack or rot it doesn't lock back on last shot but you can pull it back and lock the slide back it'll go up
Stay with the Diabolo Basic 17.0 gr .177 pellets (flat nose). The domed pellets tend to jam and one can unknowingly damage (crack) the feed belt as well as weaken belt advance mechanism of the pistol. Re: The Slide - Yes, it's just you. The slide does lock back.
It is important to point out that the slide release does not operate automatically after the last shot BUT you can lock trübseligem back with it manually. You just have to press a bit harder and then it „clicks“. Over time it gets easier.
Mine is the same as the one in the video. It does not lock back manually. Checked with the retailer and they say that on some of the guns the “notch” is not big enough to allow it to lock. I have seen some videos where it does, others where it doesn’t 🤔
bc its facke rubbish and weak
I really appreciate your video. You actually discuss in full the only big problem with this Glock. The 12 pound trigger pull. I did lubricate the belt by removing the steel plate covering the innards. It didnt seem to make much difference but after watching your video I will try it again. I like the Glock, but the trigger pull is a killer for me. One other thing. Its odd how the markings on the frame and barrel are different. I guess that goes from country to country. In Canada there is no 4,5 mm mark on the barrel. Also the other markings are different with some info numbers missing. No 9,9mm on mine. The other thing is the safety slide. It takes a plastic tool to force it off and on. You sure cant do it in the field without that tool.
I have the exact same mag in an Umarex Walther PPQ. Nice quality build but has the same problems you have mentioned with the mag. My observation is that both sides of the belt, once inside the pistol, will drag on the walls of the channel that the mag sits in, preventing it from properly cycling. Hope this helps anyone who has one of these mags, either Walther or Glock.
Nice pistol 🔫, I have heard about belt problems and jamming,still my favourite is Glock 19 NBB,for pellets I use Sig P226 or Crosman Vigilante but for some reason I want to get Crosman Night Stalker..Possibilities are endless and I love ❤️ air guns of any kind…
The Nightstalker looks like a lot of fun! Yes lots of variety out there! Good times.
Lidle at times sell silicone lubricant spray with a little red straw to direct the silicone exactly where you want it, this works well for me.
I figured out the pellets get bent in this type magazine configuration. The back gets dinged going around. Once this happens toss the pellet this is causing the jam when one is loaded in being bent
💥 I wish they would make a little bit more noise but they do look I do look pretty real
Hello , muy buen video explicado , yo tengo todas las glock y la 17 5 gen el carril se bloquea en el ultimo disparo ( es de bb en diábolos desde luego no ) ) yo por realismo me decido por la 17 gen 4 es la mas realista. desmontaje lubrificacion etc etc la de diabolos no me gusta el despiece y que al final de las rondas no se bloquee la corredera , prueba power y precision , saludos desde el mediterraneo , muy very very presentacion video.
so the only difference between gbb (green gas) and co2 version is the front cocking serrations??
the co2 version has both front and rear while gbb has only in the rear
The ultimate quality Glock is the pricey T4E one.
The different g lock air guns honestly ultimate for different purposes
I have both the .177 pellet version and the .43 marker.
What’s T4E ?
@@mariusvranceanvirixDerTod Training For Engagement
T4E means Training For Engagement. My Glock 17 Gen % .43 calibre marker is a T4E. $500.00@@mariusvranceanvirixDerTod
Lots of detail that I think you took too long to spit out and it should've included a demonstration of shooting it at target to show the accuracy or not an over chronograph. Mine arrives tomorrow and I'm mounting a Sig Romeo 0 reflex sight on it. I have the Romeo 0 on the 43 caliber version of this Glock 17, GEN 5 and the thing that I like about the Romeo 0 and the single reason I selected it was that it's got the shake week on and off
I'd like for it to make a louder noise since it's shooting a BB or pellet
Good to have u back. I've never liked the Gen 5, the bevelled front end and the grip. BB version gets terrible reviews, rattles.
The rattle of the slide is really the worst and it doesn't feel crunchy at all when you rack it. The rattle part is fixable however. Otherwise the gun is pretty good. The Gen4 design with Gen5 internals would have been great, but for now we have to choose between a great replica Gen4 that suffers from low shots and a Gen5 with that shoots well with bad haptic.
@@NOXIPHILIA I'll still never waste money on the gen5.
I've had a lot of trouble with My new Gen 5 while trying to shoot pellets. I was told to use BBs instead but if I had wanted a BB pistol, I would have bought a Get 4. At the moment I am shooting BBs to see if moving the magazine cassette loosens it up a bit and allow pellets to be shot.
Personally I wouldn’t shoot bb’s through it. It’s not designed for that and you could damage the rifling in the barrel. Lubricate the belt in the mag with silicone oil and that should significantly improve things.
Rifled barrel should never see a bb 👌🏻
Not personally much for Glocks (own two though) - but I definitely want the Walther Q5 Match beltfed pellet shooter. And I'd definitely do my work on the mag n belt prior to shooting it.
Good video! 👍🏻👍🏻
Good call. Thanks for watching mate!
Hey bro I am a new subscriber ❤🎉
Wonder if a Glock switch would still make that fire full auto.
Merci pour ces précieux conseils
Another great video buddy ! Lubricating the belt is a 'pro' move, it's got to be done as it does help with both the magazine belt rotation and lightening the trigger pull.
It doesn't look like the slide fully reciprocates like on a BB version Glock though, maybe it's just me. Shame about the no lock back on last shot though, seems a shame too that it doesn't field strip like the real steel version either (or the BB version Glocks).
Thanks mate. Yes there are some limits when it comes to it being an authentic, full function replica. That said, it has really grown on me since the problematic ‘teething stages’
What’s the furthest this will go through tin / can targets ? I was hoping 20 meters target training- would this do or it’s too low on power ?
Surplus Store reccomends the Air Arms Diablo pellets,should solve the jamming issue.
No jams here thanks to a bit of TLC and silicone oil! Great tip though. Have you tried them?
@@airgunreplicas77
Do I need to register my Gen5 .043?,I cant ffind a link anywhere.
Ive emailed Umarex,waiting on reply.
No mate. No need to register it anywhere as far as I’m aware.
@@airgunreplicas77
Im about to pull the trigger on the Gen5 pellet one,does it also come with the case like the .043?
@@UKpitbull No it just comes in a standard Glock cardboard box more like the bb versions. I think the pellet/bb dual ammo Gen 4 does come with a hard case.
That’s strange that your slide release doesn’t catch, I’ve seen most of them that do, mine definitely does. So my guess is it’s just the early ones that don’t, and they tweaked the models more and more. Like any other company
(The manual says the gen5 should too)
Mine was a bit stiff at first but then I figured out that you have to push it upwards and slightly to the left after pulling the slide back as far as it will go.
Will a surefire x300 flashlight fit on here? And can you put a red dot on here as well?
If the flashlight fits a standard picatinny then you should be fine but I haven’t tried myself so can’t be 100%. It’s not red dot ready so you’d need a bracket I think.
The trigger pull on a real Glock is close to 3kg, so it should be quite stiff.
How would you load pellets
Does anyone know how the slide "racking" of the Umarex Glock 17 gen 4 compares to the real Glock 17 gen 4 or 5 slide rack? the spring is so stiff on my real 9mm Glock 17 gen 5 that its hard to slide rack the gun normally. I want it to be easy and smooth and not take alot of power as my hands do hurt now from some arthritis.
Sucks cause when I barely put co2 in and barely twist it the co2 shoots everywhere and explodes from barely any pressure. What to do?
keep tightening it bro, it will always release a bit of gas when it is first pierced, it all depends on how quick you tighten it up
Lubricate your seals & tighten it fast , Great video
My slide locks but haven’t tried to see if locks in when it ends w/open slide….
Mine don't lock too... And my retailer purchased a second one in the same time, and it didn't lock too
So it look like they're some of them that are not properly machined
Never lube or oil anything that slides. Only grease for the slide.
If you can't take it apart can they at least make it blow back at least
This pistol does blow back.
Howcan u take a stuck pellet out
Umarex have changed the chain belts on the Glock Gen 5 pellet magazines, bagnall and kirkwood have the new white belt kit as a spare, supposedly it's more robust as I think they've had some complaints regarding wear to the belts after shooting with this and the PPQ M2. I'm not sure if they have started putting these in the new batches of the gun or made the new belts for the PPQ M2.
Good call
That would be genius! I'll have to look around for those other belts. The white plastic belt in my 21-month-backordered PyramydAir-delivered Gen 5 is very, very stiff (gets better after sitting in warm water but who has time for that!) and also wound *extremely* tight around the 2 pinwheels inside the magazine -- so much so that the backward tilt of the belt toward the top end of the magazine (I think) restricts the motion of the pinwheels around the middle pin (?) they're supposed to rotate around, no matter how much silicone oil is slathered on. I suspect the best solution is another type of belt.
My GLOCK 17 has the WHITE BELT CHAIN
Any issues with it or has it been ok?
Excellent and less worrying if the black belt snapping and no jamming👍
Don't buy anything from UMAREX, They jam and damage the gun and they will not give you a refund for a faulty weapon!!!
What price?😊
Does anybody know if it just doesn’t blowback with no ammo or cartridge in? Just got mine and waiting for my ammo and air to come in. Kind of worried
It can’t blowback without co2 as it’s the co2 that provides propulsion for the ammo. It then simultaneously channels some co2 to push the slide back to replicate the action of the actual firearm.
@@airgunreplicas77 thank you sir!
Yeah the .43 cal is apparently amazing quality, nearest to the real thing. Very expensive though mate
Yeah. Too expensive for my tastes. Happy with my .43 Walther which is much cheaper. Would consider the M&P in .43 too as I love the style of those guns.
Hi, I have a question : How can I remove my slide ? I have a pellet stuck in the barrel
I’m afraid I don’t know mate. I don’t think these are field strippable (as in you’re not able to easily take them apart by hand without using a device or tool) Are you able to shoot the pellet out with a fresh co2 capsule maybe? Just be careful and make sure you’re aiming in a safe direction whatever you try.
@@airgunreplicas77 I will try with a new co2, but it seems that the pellet is stuck for good
@@ramsesbrunkard7675 have a look around TH-cam as it seems there are a few videos on this issue.
Ah what a nightmare. Let me know how you get on and sorry I couldn’t be more help.
I have a gbb airsoft glock 17 just like this
How much to purchase ?
Can ya just buy these pellet pistols as long as you're over 18 or d'ya also need some sort of UK license/certificate?
You just need a form of ID like a passport or drivers license
@@airgunreplicas77 Cheers Pal 👍🏼 Appreciate That
@@NSR07 no worries. Thanks for watching!
I fired two shots from my bran new glock and the magazine jammed 😂 took it straight back to shop 👎
long winded without any performance shots at all. i need a bit more than word of mouth to convince me, but indepth ott. cheers good stuff.
Fair enough! Thanks for watching either way.
I've just bought a GLOCK GEN 5. Exceptionally good weapon. Had no jamming yet, but thanks for the advice with the Silicone Oil. Most idiots would use WD40. 👌👍
Still loving mine too. Out of interest, does your mag have the black belt like mine or the white belt I’ve seen on other models.
The one with the black steel chain,
The white belts are not very good so I've heard
Don't forget my friend, you was using the Glock for the first time, so it may just need wearing in👌👍
I have the black belt chain as people have told me that the white plastic one's split👍
Think the M17 sig is a better deal
Olá moro no Brasil... Consigo comprar um produto desses de preferência a Gen4... Parabéns pelo trabalho
The Gen 4 is great, you’ll love it. Thanks for watching!
When will this be released
It’s available now mate.
Hey how many ball bullet gun do you have mate lol?
Let’s just say that if I got one more I’d almost have enough…
It's made like the sig.p320 the fame
The p320 mag is similar, in that it is belt fed also, but this is a slightly different system with a 'rubber' belt, rather than the hard plastic one used in the Sig p320, X5 and M17.
Pode me informar se o magazine da G4 serve na G5?
Sorry if I’ve misunderstood but I’m struggling to translate this. I think you’re asking if the magazine from the Gen 4 will fit this Gen 5. The answer is ‘no’. This Gen 5 uses a really specific type of magazine so neither the ‘Gen 4 bb’ or ‘Gen 4 dual ammo’ magazines would fit. I hope that helps to answer your question. Thanks for watching!
Still sounds very clinky/clangy
In the official video presentation of the gun that dude Mark shows us that the slide DOES lock back, this is the only fu...n reason i bought it !! Well actually it does not, the slide button does nothing, another fraud from umarex thanks.
VERY Very very very very nise Is May laight
Good night thanck iou good bai mister laightbay
The smith Wesson 40 bb gun is better than the Glock geñ4
Nope
Just watching this after searching for the new umarex offerings for 2023… seems to be nothing new in replica market ( even legends) ? Disappointing to say the least!
What’s your taste in guns? Would you ever consider Airsoft?
So the actual point of 30 minutes long video is just to Lubricate... got it.
Then my work here is done. Thanks for watching.
Get a Jam stick
This review is way too long. For a 30+ minute production it should contain shooting and spec info as well.
You should do a rehearsal, take notes and then repeat. It's not just you - most of these gun reviews need to heed the same advise.
Spec info at the 1 minute mark.
how powerful is this comparing the Game blowbacks?
Do not buy this. I own it and magazine is crap and belt broke right of after firing about 100 rounds. There is a better gen 5 modell with a spring loaded magazine its better in all ways.
where when how? also umarex?
This gun is junk I bought 2 had to take both back do not buy.
*DO NOT BUY THIS GUN, I BOUGHT THIS A WEEK AGO BRAND NEW AND THE INTERNAL MAGAZINE ROTATION PART HAS GONE LIMP AFTER 200 SHOTS! THESE ARE NOT WORTH THE MONEY GUYS TRUST ME*
Does the slide lock back after the last shot
Sadly not. Due to the belt fed mag and the way the gun operates, there’s no way for the slide to ‘know’ that the mag is empty. It’s the same for all pellet guns with rotary or belt fed mags.