Wood carving for begginers, all diffrent types of carving burs, part 2
ฝัง
- เผยแพร่เมื่อ 21 พ.ย. 2024
- In this video Wood carving for begginers i show all my "GO TO" burs and how they work on a piece of wood for the begginer wood carver. Part 2
I use the black and decker Rtx rotart tool and it is listed below, with other tools i use and suggest
Black & decker rtx 👇
amzn.to/2R00mXQ
amzn.to/2T1LPOb
Www.patreon.com/carvingfusion
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
"I am a Amazon partner"
Amazon
Knock off foredom
amzn.to/36LhlUD
Amazom
A lower budget rotory tool and flex shaft that will get u carving,
I have a few of these and suggest them to someone that wants to try power carving.
Wen rotory tool
amzn.to/2R7cfvb
Amazon
Foredom foot speed controller pedal
amzn.to/36LZXPC
Amazon:
Wood burner
amzn.to/2TcUcqf
Amazon:
Aluminum cutting burs
amzn.to/2T2iQtD
Amazon
Small detail cutting burs 20pcs
amzn.to/303DavU
Amazon
Emery cloth sandpaper box set
amzn.to/2QYS3M1
Amazon
Dremel flex shaft
amzn.to/36Gmays
etsy.me/2Usrss6
/ carving_fusion
/ carvingfusion
Thanks for this. As a jeweller for 45 years I'm used to rotary bits and burs, but now I want to do some wood carving and you've given me a great intro into what works. 👍👍
Good Demostration Excelent
Man, even when you say you're having a heckuva time talking, you're really helpful. I dig your explanations and they've saved me some serious mistakes. I appreciate you.
Awesome thank u
Walekum ji kar Bade bur chahie yah bus kitne ke Milenge ji pura setup jaaiye setup pura set Johnson are bus karne chahie Mere Pani Rata Kijiye Pakistan mein mangwana hai Punjab Mein Hamara Suraksha Kijiye Hamara number hai Sirf Tumse 614 Burai Meherbani Hamara phone number hai hum Sarafa kijiye Humne uski jarurat hai
Thank you kindly, don't be so hard on yourself for a live mess up- this wasn't scripted, it wasn't practiced, it was just raw information and I love it. Thank you for your video! :)
Awesome thanks spade
I really like Jordy and i hope hes not offended but he sounds as dumb as me. but thats what makes him such a good teacher because he makes mistakes , drops things and gets mad at himself. It feels like i am there with him. no cut glass accent patronisingly telling me what to do ,it feels more like a mate who loves what he does and wants you to feel that way too. what a fantastic role model. He deserves to do well in life .
Awww thank you and you too
Out of all the you tuber on here I believe your the most honest! Thank you! I'll check out harbor freight and Amazon! ☺
Thanks for highlighting that some are for wood and some for metal. I'm new to this and that's a really important point.
Great Video Jordy! Since I'm new to thei style of wood carving, I REALLY appreciate this video as it gives me a better idea on which burr to use on different types of carvings! May not seem like much to more experienced carvers, but to 'newbies' like myself...it will safe lots of time, effort and wood to achieve my desired results! THANKS of all you do! SAVE carving to you and yours ALWAYS!
Thanks kenn
Being a left-handed person, I knew the carving was going to be a challenge because of the rotation of the bits. I haven't started carving yet but wanted to do research about the bits I would need. Your being left-handed is a plus. Thanks for the videos; I am looking forward to learning.
Wicked karen@ u will have fun
being left handed would be ideal as then the debris is thrown away from you.
@@Rootpuma2.0 husband on standby with blower!LOL
I done my first woodspirit Jordy, youve inspired me man
AWESOME TY
@@CarvingFusion i wanted to send a picture of it but im a bit dumb with technology
Great video Jordy, thanks for the demo. Great introduction to carving burs
Just bought my grinder today, thanks for the tips and explanation
Jordy, thank you soooo much. I am a total newbie and this answers many of my questions.
Thank you Jordy for showing all the different strawberries and what and how they are used for, you are a genius. It is a pity that in my country you cannot get Kutzalls, and bringing them from abroad is a bit complicated. Greetings from Buenos Aires, Argentina.
go amazon
Nothing like education with my morning coffee. Excellent narrative and demonstration of the 1/8 " burrs. This should keep us new carvers happy for awhile. Thanks again for sharing mate. Now off to carve some Easter bunnies! LOL getting a jump on the season.
Another informative video. I bought a dremel tool came with plenty burs and every time I saw a different shape one I bought it have loads including those kits of metal carvers -I tried them on wood-. I had given up as things I tried were to put it bluntly CRAP! I have now got a centive to try them again and I'm more positive.
Thanks john, make sure u get some kutzall burrs too
Great examples and demonstration.
Good starting points for us beginners. Thanks so much.
picked up a sander from Pete, impressed should have done it sooner
Thank you for this video. I am an absolute beginner at carving, and I found this to be very educational. I subscribed and will be watching more of videos.
Thanks man, saved a lot of time for me and anyone looking too get started rotary carving! Most informative vid on all the bits and thier uses.
Thank you - this really helped I already own a 4000 going to use it and start carving.
Awesomeness
Somebody lent me a rotary tool which I mean to use mostly for wood and this is _so_ useful!
I ordered some kurzall burrs I'm going to make some cool furniture can't wait.
Awesome good 4 u
I love your videos. You are a great teacher!
Find the right foot pedal, I know the feeling, I have 4 of them. I like the little bristle sanders for getting into small deep cuts like beard and eyebrow hairs. They work good for that stuff. Good demo of what cutter does what cutting and how to use them. Thanks Jordy.
Good
Thanks Jordy. Great video.
Thanks for the video Jordy, iam forever swapping burrs in my dremel whilst carving thinking wonder if that will cut better. I made your sander! BRILLIANT.
Thank u and cArve on
Thanks! Very useful video!👍 I know how to cut wood shapes with a chainsaw, but I just started trying it with a dremel!👋
Great vid Jordy, cleared up my confusion between Aluminium and Metal Work burrs, by the way I use a dremel multi chuck does away with collets and the little spanner. Keep up the good work 👍
Great video. I'm expanding my collection with some of your burrs.
Awesome and be safe
Great overview, Bravo!
Thank you
First of all..Thanks for clear explanation. I'm a rookie and learning a lot of things from your videos. I also using Kutzall burrs and im very happy! But have a question about Kutzall extreme Taper burr. Because now i need that shaped burr and saw some comments about how bad it is and bended burr photos. Have you ever accidentaly bent taper burr ? or what i can do for not bend ?🤔
I myself have never bent a burr, just snug it rite up to the collet and pull it out a few mill and tighten it up.
People that bend the burrs probably have them sticking out to far and running there dremel full speed.
Hope it helps
@@CarvingFusion Got it. Thanks a lot!
I love your content sir
Who knew burr envy was a thing lol
777071173
Much appreciated...... I’m a total novice here so this was extremely helpful as I’m ready to order my burrs. I have a brand new Dremel 4000 and waiting for my flex shaft to arrive. You mentioned using a foot pedal, do you have a video on how that is hooked up to the Dremel?
I Would realt like The Kutzall Extreme “ flamber “ ( or what you called it ) - I just can’t buy here in Danmark . So please buy me one and bring it when you ever go to Danmark . I Will serve you a Nice dinner and some Wine or Beeer, or Both if you prefere. Best regards Esben Back 😀
Thanks for showing us that lot mate 👍 its answered a lot of my questions good on ya 👌👌👏
I wish we had those kutzall bits here in South Africa. Can't find them here at all.
I am just catching up 2 years later.. with your video. Kutzall ( on Amazon) does not sell a pack of 10 anymore😩. But by burr..and the price is🙁🙁🙁. Your video is extremely helpful and well done btw. Thank you
Ty
Great Video Jordy, How about a Video on just How aggressive you can get when breaking a Flex-Shaft
Very helpful, thank you.
Just came to the comments for the. Ok's. Ohhkayg!
Helpful information ...... But, how can I get this bits and the dremel here in Ghana.. 😢😢😢
Not sure sorry. Amazon?
Great video! Thank you for sharing this information.
Have you ever tried router bits for carving? If used incorrectly and maby slightly modified they look like they could be super aggressive. Completely new to carving, the thought just crossed my mind.
I'm going to be investing in some kutzall bits, once I get my work shed sorted (roof has sprung a leak).
Jekar patpur chahie Humne yah setup chahie Punjab se baat kar rahe hain Pakistan se kitne ka padega yah Hamen aur phone number Hamara ji 306 70 1430 yah number Parda Kijiye Barmer Bani
olá, saberia informar algum site onde seja possível a aquisição desse kutzall? Amazon? ou algum semelhante?
Yes amazon or kutzall sight
I love your videos thanks for teaching me a lot. Can you please tell me how you made that sander for your tool? And what is the best one to use to make points, like the point on a captain letter A?
Is u go threw my.playlists u can see my sander,
Very helpful information mate, just starting out and this is brilliant info , thanku
Awesome demo bud
I am a beginner and i would like to know can you use all of these burs against or with the grain or do i need different types for each one with the grain or against the grain?
Nope with these burrs you can cut any way grain u would like
Thank you!
Great video man! Just got onto your channel a few days ago I’m in Langley nice to see a local artist on here keep it up !
Nice to have someone from the neck of the woods around! Hope to see ur carvings
great video man very informative and eaasy to understand
Really helpful
So you can use metal working burrs on wood?
Yes
what burrs would you recommend for hard plaster?
Aluminum cutting bitts
What size in us is 6mm shank i have my biax tool
Great video! I'm a new carver and starting with signs for my community. I'm curious about speed. I'm carving simple signs, like "Speed Limit 15 MPH" signs. I'm working with pressure treated leftovers from my neighbor's decks and fences. Pretty sure some are pine (soft, right?) and no name wood. All have been aged. I can transfer the letters, follow along, but at what speeds do I want to go? I tend to be hesitant to really crank up the speed. Is higher speed better for cutting the letters in or slow and low? (This question may seem simple, but I'm simple and not very confident at this point. Sorry.)
It's ok so am I,
I think it's just good to run your tool what works best for you, the more u do the more u will figure out what works best for ya
Thank tou
Thank you☺️!
Good handy tips 👍
Thanks u
What do you recommend between rotary rasps (Saburrtooth) and carbide burrs (those with bevels for aluminum)? I have ordered exactly the burrs you have here at 0:06 (with 6 mm shaft, for die grinder), because Saburrtooth is not present in Romania, and I should order in Germany. Cost is about the same, but I thought the carbide burrs must be stronger than the rasps. What is your opinion?
Very helpfull, u r the man👍
Very nice great tips
What's its price small size bits and machine ,are u order release in kashmir ,but original machine
Hi Jordy, just brought a Dremel 4000, I'm looking to carve wood spirits, I'm in the UK, I see you use good quality Kutzall bits, they are quiet expensive but I know you only get what you pay for! :)
Having said that, I if I were to buy just one or two to start, what should I buy please? KUTZALL has many one their site. Many Thanks
The flame extream and extream taper
@@CarvingFusion Cheers mate, much appreciated!
@@CarvingFusion Cant get these in the UK, only on Amazon UK and cant see these anywhwere??does the shaft have to be 1/8...as some are 1/4?
thanks for the tips
Very good info, thanks
How do you clean your burrs to make them last longer?
Sit in wd 40 over night
Also _very_ useful!
Great with coffee 👍👏👏
what type dremel rotor are you using? Please
I normaly use dremel 4000 also use cheaper ones like Wen or what ever but always worth the dremel flex shafts, most the other ones suck
Description below? I’m not finding it. Does it have your discount code?
Ok my friend
Ok
Como puedo hacerme alas brocas
From where will get wood carving burs?
Good info. Thanks
:)
Just ordered a very course tungsten carbide sphere through fine grit sphere and I got a tungsten carbide 10 set kit
I would get a kutzall extream flame bur, game changer
@@CarvingFusion that's my next buy. I'd like to eventually get a set, but I gotta start somewhere. I'm working on making a wooden kitchen utensil set for my mom
I'm from Assam west karbi anglong
Hi ,i have questions for you , i have dremel 4200 & 400xpr and also i have dremel flex shaft after i see your video about kutzall burr i got 2 of them but the shaft is 1/4 and 1/8 , i want to know how i have to fit them in my dremel ? , is there any adopter or flax shaft that i can fit in to my dremel ? Let me know what i have to do please
U will not be able to use the shaft size 1/4 for a dremel (its to big)
But the 1/8 will fit, u have to make sure u have the rite.size collet on the dremel handpiece,
Carving Fusion By : Jordy Johnson so i have to bye another carving machine ?
very helpful thanks
Aonde compro essas brocas?
Is your foot pedal compatible with the dremel 4300
Yup sure is! I would try get a foredom speed control pedal
Thanks I'm just getting into carving. All I need now is a few bits and a foot pedal. I enjoy your videos especially that birdhouse video and the memorial piece you did.
How long have you been doing this Jordy? Looks like you have quite a collection of bits and they're not cheap...
Hey jamie, about 5 years now
Can you resharpen the burs
Would take a long time
@@CarvingFusion just seams like so much left when they quit cutting. Thank you
Como comprar essas pontas ?
English?
oke
Having trouble finding the”link below” for the 5% discount on burs 🤔
Click the more button
I want tobuy
those are not "aluminum" burrs - the brand name is Aluma but they're made of tungsten carbide. you may be messing some people up by calling them "aluminum".
Lol haahah they are aluminum cutting burrs, but anyways I like to call things what I want ? Thanks
Finlay found a distributor here in Aus that sells the kutzall burrs only problem is they are $30 a burr and the prices have risen because of this virus shit and thieves on ebay are asking $300 for the Dremel 4300 and $80 for the flex shaft
Brutal
ok
I want Wood carving burs
Why would the burs slide out when I run my drill?
Most likely need a new collet,
the collets also come in different sizes...you might have got the wrong size shank....get the smaller collet and set for all shank sizes....well up to the largest your tool can handle
You're not closing your collet tightly enough using the spanner provided.
How many times did you say OK??? 🤯🤣🤣🤣
Not to sure did u count for me? :)
where can i buy that things
Amazon
When you talk to you sound like a Native American from the north
Nope west coast Canada with a touch of Irish:)
Why don't any stores sell these bits :'(
Amazon
I have to smash the plastic box with a hammer to open them.
Crazy weird rude but good info