This is brilliant! Thanks so much for showing how this is done buddy 😊 Mine didn't come out and I wasn't sure what the issue was, but it turns out it was the metal plate not moving (rusty I think) so a little tap with a screwdriver and hammer and it moved out the way, letting me get the locking mechanism out. Thanks again 👍
Thank you. @bushido warrior Absolutely fab video, no nonsense. My T6 handle was stuck out- this allowed me to fix. My Kombi has no insulation so allowed me to use a proper T20 Torx screwdriver
I like these no nonsense no head wrecking music video. Straight to the point. But I have a question. When you have the handle removed, how do you remove the mounting bracket that sits behind the handle and over the locking mechanism. I had to get a replacement as my one fell apart while in situ. It is a 2016 caddy but looks like identical handles to yours
the standard front doors have a spring clip, your sliding door shows none so how does the handle spring back? mine works fine apart from the spring back, the handle is loose.
Just wondering, the forward part not lock end, of the handle on mine feels a bit loose. You can rock it slightly up and down. What could that be? Is it the plastic part worn out? New handle?
@@marikamineur9323 I ended up replacing the mechanism. I looked at a video and got stuck in. Seems to have solved it but they are not the best design out the factory in the first place. Plastic on metal plus you use the handle to pull the weight of the door back and forth
Thanks for the reply. I took mine off last night and couldn't see anything obviously wrong so I'll order replacements too. Makes sense they wear so poorly when you put it like that. Is it just the handle that you replaced or the whole inside aswell too?
great thank you. on mine the handle is loose from the outside, is there anyway of tightening this, or does the unit need replacing? thanks again in advance. 👍
Thank you very much. 5 minutes fix after the bodyshop guys were too busy to fix everything back.
Really appreciate how difficult that was to film, but was still very informative. Just what I was looking for 👍
This is brilliant! Thanks so much for showing how this is done buddy 😊
Mine didn't come out and I wasn't sure what the issue was, but it turns out it was the metal plate not moving (rusty I think) so a little tap with a screwdriver and hammer and it moved out the way, letting me get the locking mechanism out.
Thanks again 👍
Thank you. @bushido warrior Absolutely fab video, no nonsense. My T6 handle was stuck out- this allowed me to fix. My Kombi has no insulation so allowed me to use a proper T20 Torx screwdriver
Just thought I'd mention it's a T20 torque screw.
Good video
Thanks a lot! EXACTLY what i was looking for!
Brilliant, do the handles wear out ?
Sometimes ours doesn't open
Great video mate,wish mine came off like that but doesn’t exactly as I’ve got deadlocks near the handle😭👍
Mine won't come off either! What do you do if you have deadlocks? PS - I think I have them, as it locks "twice" 🤔
Just what I was looking for pal cheers 👍
I like these no nonsense no head wrecking music video. Straight to the point. But I have a question. When you have the handle removed, how do you remove the mounting bracket that sits behind the handle and over the locking mechanism. I had to get a replacement as my one fell apart while in situ. It is a 2016 caddy but looks like identical handles to yours
Thank you SO!!! much for posting this. I do love You Tube, there wasn't a cat in hell's chance of me figuring this out on my own.
Had to confirm. Bless you for sharing this 😉
Cheers
Nice just what i needed nice one !!
the standard front doors have a spring clip, your sliding door shows none so how does the handle spring back? mine works fine apart from the spring back, the handle is loose.
I also have a loose spring it does not return as it should. What could be the issue?
Sorry to be dim, I am new to all this, what is the ratchet device you are using with your 2 35 Torx attachment called?
Just wondering, the forward part not lock end, of the handle on mine feels a bit loose. You can rock it slightly up and down. What could that be? Is it the plastic part worn out? New handle?
Did you end up finding the issue with this? My VW caddy is the same which is why I was looking at this vid
@@marikamineur9323 I ended up replacing the mechanism. I looked at a video and got stuck in. Seems to have solved it but they are not the best design out the factory in the first place. Plastic on metal plus you use the handle to pull the weight of the door back and forth
Thanks for the reply. I took mine off last night and couldn't see anything obviously wrong so I'll order replacements too.
Makes sense they wear so poorly when you put it like that. Is it just the handle that you replaced or the whole inside aswell too?
Thank you!! Much appriciated.
Hello, super video, is it the same voor de slidedoor, how do i get access? I have a T6 2016 California ocean
great thank you.
on mine the handle is loose from the outside, is there anyway of tightening this, or does the unit need replacing?
thanks again in advance. 👍
Does sound like wear and tear but without seeing it would be difficult to comment.
Remove handle and unit and inspect components for wear 👍
Excellent!
Thanks for this really helpful!
Thx, i had a problem but i needed to slide this gold metal plate (it's stuck or something) and it pops out
Great stuff, thanks for the insight 😀
Thank you for sharing !!!
Wish you'd have taken a video of you removing the panel! :(
Legend
Thankyou
özel bir boyası varmı