I LOVE YOU BECAUSE YOU MAKE THE VIDEOS THAT I HAVEN'T MADE YET BUT WANTED TO MAKE BUT HAVEN'T FOUND THE TIME TO AND NOW I CAN SEND PEOPLE TO YOU INSTEAD OF FEELING GUILTY FOR NOT MAKING THEM YOU'RE THE BEST JUSTINE
Awww Gee 😊 GOOD! Love when that happens! Thats why I wanted to make the collaborated playlist because you have fins and skins I don’t, and “Does X fin fit Y tail skin?” is my most asked question ever.
Awww Gee 😊 GOOD! Love when that happens! Thats why I wanted to make the collaborated playlist because you have fins and skins I don’t, and “Does X fin fit Y tail skin?” is my most asked question ever.
The linden and the finfun skin combo is great as a beginner !!!! I like the linden SO much more than the finfun monofin :) but its scary to think about how learning would mess up the mertailor skin i got with the linden. So glad it fits!
I think the linden monofin must perhaps be one of the if not the most compatible monofin with most tail skins...the genius half-moon crescent shape of it does the trick superbly I guess and it just goes to show how super brilliant the inventor mind of mermaid Linden truly is😎😎😎🌹🌹🌹🌼🌼🌼🌺🌺🌺🌹🌹🌹🌹
As you're pulling the skin over the monofin, put your hand inside the skin and work it over the edge of the fin from the inside... stroking from heel to tip along the edge lines the fabric up with the monofin edge nicely. I usually reach in from the top , roll that down and adjust the skin over the slightly bulky heel straps. Once you get it aligned it fits beautifully. i adore Fin Fun + Linden.
I began with the Fin Fun monofins, but have large broad feet so they are EPIC to get into. I proceeded to the Luna, Mahina and Linden. The Luna is great but it rubs my arthritic toe the wrong way and is a hair too tight. The Mahina fits in NOTHING but is fabulous (for some reason, it seems to only like open water not pools...). The Linden is my favorite, powerful, agile, and fits in the Fin Fun skins with little trouble. I have had the corners slip (the monofin corners slip off the inside of the tailskin corner) a bit thrashing around on the surface for photoshoots... simple adjustment and go again... They look great. The Fin Fun Atlantis tails with their extra heels fins cover up the slight buckle bulge on the Linden.
Sure looks like one heck of a workout(s) to put on those monofins in that tight tail...whewww!! As I sure know it's for me when I put my linden in my tail with all the pulling and tugging😂😁
Mermaid Jaffa, I have never seen a fantasea one in person so I don’t know, but from what I understand it is quite a bit wider so my guess is that it would not fit a fin fun. The linden is much stiffer and more powerful than a foil.
Question babe! I ordered one of the Atlantis tails from fin fun...are they the same as the fin fun skin your using now. I want to order the linden mermaid monifin for my Atlantis tail...
Will the luna damage the skin I'm planning on buying a luna for a better upgrade I know it will stretch a bit but i have 2 finfun skins one larger one smaller
Unless one is a kids size, the flukes will be the same size. There is a chance that the Luna monofin will stretch out the skin around the fluke area overtime because it is a slightly different shape, but as long as you’re gentle putting it into the tail skin just like you would any other monofin you should not see any significant damage to the tail skin.
Hi I’ve been wanting to know if I get a fun fin tail what size will I need I wear a size one in jeans and my waist is 28inch when I need woman’s x small or a youth 12 or a small in woman’s I’m so confused u read comments that said the had to get a size down because it’s too big
It depends, on how old you are, if you already have a monofin, and how tall you are. If you are full grown, short, or have the kids size monofin, get a kids. If you are still growing, tall, or have the adult fin get a small. It also depends on how tight you want your tail. If you like it tight size down, if you don’t care take the recommended size. For me I am tall, and I like my tails tight. I wear a smaller size so it is tight and won’t slip down.
Hi again my dad ordered a tail off of wish I knw you will be worried abt safety so I'm not too worried again it just the monofin that is too expensive I really want the Luna monofin I have seen ur review but I need a monofin to fit in this wish tail it looks like a finfun just the offbrand cuz my dad could not buy the original so I need a tail to go in there so I hope this video will help me get a monofin to fit hopefully not too expensive OK now bye mermaid Seamstress have a Good day hope ur video will help me 😊👌❤️
@@TheMermaidSewist hahaha if you are clever you might be able to modify the Fin Fun to accomodate a Mahina (that is, cut off the bottom and make an "underwear fin" out of it).. I actually rolled up the Fin FUn around my ankles, and put the Mahina on... doesn't look awesome tho... lol
I'm so glad the linden fits, I was planning to make that my starter fin
its a good one its comfy too
How would I go about tacking it in
Tacking just means doing a few loose stitches every few inches to keep it close at the bottom
I LOVE YOU BECAUSE YOU MAKE THE VIDEOS THAT I HAVEN'T MADE YET BUT WANTED TO MAKE BUT HAVEN'T FOUND THE TIME TO AND NOW I CAN SEND PEOPLE TO YOU INSTEAD OF FEELING GUILTY FOR NOT MAKING THEM YOU'RE THE BEST JUSTINE
Awww Gee 😊 GOOD! Love when that happens! Thats why I wanted to make the collaborated playlist because you have fins and skins I don’t, and “Does X fin fit Y tail skin?” is my most asked question ever.
Awww Gee 😊 GOOD! Love when that happens! Thats why I wanted to make the collaborated playlist because you have fins and skins I don’t, and “Does X fin fit Y tail skin?” is my most asked question ever.
The linden and the finfun skin combo is great as a beginner !!!! I like the linden SO much more than the finfun monofin :) but its scary to think about how learning would mess up the mertailor skin i got with the linden. So glad it fits!
Can you test a Fantasea one in a fin fun tail
I think the linden monofin must perhaps be one of the if not the most compatible monofin with most tail skins...the genius half-moon crescent shape of it does the trick superbly I guess and it just goes to show how super brilliant the inventor mind of mermaid Linden truly is😎😎😎🌹🌹🌹🌼🌼🌼🌺🌺🌺🌹🌹🌹🌹
I agree
This is exactly the content I was looking for, you're the best!
Thank you so much for this video! I just ordered a Linden today! I'm so excited!
You post the best most informative videos, thanks!
As you're pulling the skin over the monofin, put your hand inside the skin and work it over the edge of the fin from the inside... stroking from heel to tip along the edge lines the fabric up with the monofin edge nicely.
I usually reach in from the top , roll that down and adjust the skin over the slightly bulky heel straps. Once you get it aligned it fits beautifully. i adore Fin Fun + Linden.
I began with the Fin Fun monofins, but have large broad feet so they are EPIC to get into. I proceeded to the Luna, Mahina and Linden. The Luna is great but it rubs my arthritic toe the wrong way and is a hair too tight.
The Mahina fits in NOTHING but is fabulous (for some reason, it seems to only like open water not pools...).
The Linden is my favorite, powerful, agile, and fits in the Fin Fun skins with little trouble. I have had the corners slip (the monofin corners slip off the inside of the tailskin corner) a bit thrashing around on the surface for photoshoots... simple adjustment and go again... They look great. The Fin Fun Atlantis tails with their extra heels fins cover up the slight buckle bulge on the Linden.
Thank you! I really appreciate this video, I need an affordable tail to start with but it was impossible to tell what would fit just by looking. ♥️
Love these videos! Hugs from Mexico!
This was just what I needed, thank u!!!!!
Luna fits in fin fun elite tail skin with the vinyl
It might fit well, but it doesn’t provide the propulsion to be the safest option for a vinyl fluke.
Sure looks like one heck of a workout(s) to put on those monofins in that tight tail...whewww!! As I sure know it's for me when I put my linden in my tail with all the pulling and tugging😂😁
so I have one of the original Fin Fun Tails that does not have re-enforced tips. DO you think it would still be alright to use the linden?
Yes. The reinforced tips helped more with preventing damage when scraping on the bottom of the pool.
Damn it. You answered my question in this video lol. Thank you. Also do u feel the linden doesn't have much power?
It has a lot of power more than a mahina
How is the Linden's propulsion compared to a Finis Foil? Is it the same or similar push? Speed? Also, would the Fantasea 1 fit into a Fin Fun skin?
Mermaid Jaffa, I have never seen a fantasea one in person so I don’t know, but from what I understand it is quite a bit wider so my guess is that it would not fit a fin fun. The linden is much stiffer and more powerful than a foil.
Thank you very much! Do you know if the fin fun elite monofin fits in there too?
Question babe! I ordered one of the Atlantis tails from fin fun...are they the same as the fin fun skin your using now. I want to order the linden mermaid monifin for my Atlantis tail...
They are pretty much the same, just with fins
Will the luna damage the skin I'm planning on buying a luna for a better upgrade I know it will stretch a bit but i have 2 finfun skins one larger one smaller
Unless one is a kids size, the flukes will be the same size. There is a chance that the Luna monofin will stretch out the skin around the fluke area overtime because it is a slightly different shape, but as long as you’re gentle putting it into the tail skin just like you would any other monofin you should not see any significant damage to the tail skin.
I’m hoping that the FINIS mermaid dream monofin fits inside
An old video but, Do you think the Small sized luna monofin would fit better in the fin fun tail?
Definitely
Hi Justine 😊 what do you think is the fastest monofin of all the ones you own?
kathy Maree my competitor monofin is the fastest with the least energy, but of my more recreational fins definitely the linden.
Linden
Hi I’ve been wanting to know if I get a fun fin tail what size will I need I wear a size one in jeans and my waist is 28inch when I need woman’s x small or a youth 12 or a small in woman’s I’m so confused u read comments that said the had to get a size down because it’s too big
It depends, on how old you are, if you already have a monofin, and how tall you are. If you are full grown, short, or have the kids size monofin, get a kids. If you are still growing, tall, or have the adult fin get a small. It also depends on how tight you want your tail. If you like it tight size down, if you don’t care take the recommended size. For me I am tall, and I like my tails tight. I wear a smaller size so it is tight and won’t slip down.
I'm so sad, I got a finis luna and a finfun tail and while the luna does fit it immediately started pulling the seems at the bottom of the fluke
It does stretch the tail out, but popping seams are an easy fix with some hand sewwing
OMG this video is awesome thank you so much ❤️
Would a suntail work as well? Has a similar shape
Cali Calico I would guess so, but I have never tried. I believe Nerdmaid Faith has a video on that
Yup, but its a bit big like the Lindeb
is that the adult size mermaid linden or the kids one?-
Rae C: adult size
The Mermaid Seamstress thank you!
Hi again my dad ordered a tail off of wish I knw you will be worried abt safety so I'm not too worried again it just the monofin that is too expensive I really want the Luna monofin I have seen ur review but I need a monofin to fit in this wish tail it looks like a finfun just the offbrand cuz my dad could not buy the original so I need a tail to go in there so I hope this video will help me get a monofin to fit hopefully not too expensive OK now bye mermaid Seamstress have a Good day hope ur video will help me 😊👌❤️
Good luck
What about the 2 tails fin?
I believe Nerdmaid Faith has done it. I have never seen a 2tails fin in person
Aw you didn’t do suntails
I don’t own one, but @nerdmaidfaith has a few videos combining the two. One is in my monofin tailskin combination playlist
Would a kids mermaid linden monofin work for me? I have a size 6 in women
Funsize Nyny Maybe, but it might be a tad snug
@@TheMermaidSewist thank you so much
Is it possible that a mahina monofin could work as well?
Hannah Patrick The mahina definitely doesn’t work. It is way too big
@@TheMermaidSewist hahaha if you are clever you might be able to modify the Fin Fun to accomodate a Mahina (that is, cut off the bottom and make an "underwear fin" out of it).. I actually rolled up the Fin FUn around my ankles, and put the Mahina on... doesn't look awesome tho... lol
Hi
Hello! Beverly & Ayvah