Amazon Basics CR2032 amzn.to/3px5mVL The Amazon Basics CR2032 3 Volt Lithium Coin Cell Battery works the best for my Honda Odyssey key fob. Follow me on Amazon www.amazon.com/shop/ToolsElectroDIY/ (Daily Live stream) Instagram instagram.com/ToolsElectroDIY/ As an Amazon Associate I earn from qualifying purchases.
The Amazon battery is much thinner than a Duracell and does not give as good an electrical connection. The Amazon battery I installed did not work or worked for a brief moment. then I discovered it is too thin to work in Honda remote. Lousy batteries! Duracel battery is thicker and putting in a Duracell solved my problem with el cheapo Amazon battery.
Thank You! I was thinking the batteries were bad, but then you showed me that the connectors weren't connecting. Thank you sir, you are a scholar and a gentleman!
Turns out the issue I was having was that the little plastic tabs holding the connection plate for the positive were bent down preventing the battery from touching that plate! Thank you for the info. You saved me a couple hundred bucks!
Thank you so much. I replaced the battery and i had the same issue. Was looking for something that could help me and i found your comment,I checked and definitely it was the problem
OMG You’re the BEST. My son’s wife accidentally soaked my son’s Honda HRV fob in the ocean. He brought it to me because it wasn’t working (lock/unlock/trunk open/close buttons not working. I replaced the 2032 battery (Panasonic brand)but still no go. Then I noticed the red led light wouldn’t even blink. You pointed out the possible poor contact along the sides of the battery. I slightly bent those contacts towards the edge of the battery and that solved the problem. The water exposure issue was very brief and there was little if any water in the fob. I think that water issue diverted our attention away from the primary problem. Many thanks for posting your video.
THANK YOU SO MUCH! I have spent a solid 2-3 hours, countless videos, websites and a world of frustration and defeat over this issue. You have given me peace! ❤️🥳
this video and these comments saved me so much money and heartache. it was the two plastic black pieces that were folded down as many people said was the issue for them. i used some tweezers to move them out of the way, then i put the battery in at an angle so that the battery was touching the back piece first before snapping it in. all of the sudden it worked again! thank you!
This worked perfectly for me! Those two TINY black plastic tabs that are supposed to hold the battery in place were bent down (broken) & preventing the bottom (negative) from making contact with the little spring loaded u shaped terminal when the battery was snapped into place. I just folded those tabs back, snapped them off, they’re completely unnecessary, put the battery back in… Bingo works like new!! Thanks for the video!
Thank you so much. I couldn't understand why my key fob wasn't working right after changing the battery. Your explanation of how everything works made me check my battery again. I found that it was just a hair off in the slot. Now I can lock, unlock and turn my car on by the buttons on the key fob. So, thank you so much.
I changed a couple of Honda Fit key fob. One of them won't light up after installation of battery. I though I damaged the key fob during replacement and almost decide to buy a replacement key fob. After watching, I realized the common issue of the positive mental flaps were bent, using a tweezer to open the metal flap allowed my battery positive side to have contact, and the light is now lit and my key fob works like a charm. Thanks for saving me a few hundred dollars in dealership. Nowadays everything cost arms and legs, LOL!
You saved the day for posting this video and kept $200 in my pocket! Can’t thank you enough. The dealer couldn’t even figure out that it was the battery connection (yet maybe they could, they just thought that I would order a whole new key fob).
Thank you for your video! It is the only one that helped me. I had been replacing batteries for over an hour and nothing worked. Then I watched your video and realized my prongs were down and the battery wasn’t making a connection! Now it works perfectly! 😊
I locked my 2004 odyssey while running yesterday and spare key fob did not work. After replacing the battery I realized the red light wasn’t coming on. It wasn’t a bad battery either. I cleaned the contacts and battery surface with DeOxit contact cleaner still no red light on fob. Thank you for the small detail about the plastic clips aligning the battery inside the fob (esp the positive connections). One of the plastic clips actually broke off but I could see that caused the battery to be poorly positioned. Once I slid the battery in place I made sure to get the + connection tight and that made all the difference. The red light flashed every time and my spare key fob now works perfectly. This was a great help TY
I thought I had to get a new keyfob but the black little tabs were folded down. That prevented the battery from actually making contact with the back piece. Easy fix. Thanks for the video.
Thanks a bunch. This worked. For future reference to Honda S2000 owners the two very small positive prongs had backed off over time since 2001. Even a new tested energizer CR2025 had no effect. I was just about to buy a new key fob when I ran across your video. I took a tiny flathead, bent the two positive prongs forward just a bit and voila! Back to normal. Over about 4 to 5 months I noticed the buttons would sometimes work and sometimes not. It gradually got worse until today when it flat gave out. The 2 positive prongs pushed outward just a hair was enough to make solid contact once again. Subbed and liked!
Kept searching until I found something that worked. You’re awesome. Both of my keys weren’t working. The connection wasn’t connecting. Thank you thank you thank you so much.
I thought that this video was so stupid but then I took a second to think because I know I put a new good battery in my key fob. Maybe my buttons were misaligned and that’s exactly what happened when I changed my battery my buttons became slightly misaligned, and they stopped working for that reason because they weren’t fully depressing the button, thank you for this video. It helped and save me a ton of money. Thank you so much five stars two thumbs up and a happy viewer 😁👍👍
I have a 2020 Honda CR-V. Although I had changed the battery 3 times, it still kept showing "low battery". I was about to take it to the dealer because I thought there must be something wrong with the key fob. After watching your video, I tried it with the Amazon Basics battery, problem SOLVED! Thank you so much for doing this video and for saving me a lot of money!!
I’m so glad it was helpful to you too! This is exactly the reason I posted this video to help those with the same issue. Smash the like and subscribe. Thank you very much for your support.
It just worked great for me .... 2015 Honda Crosstour had a recurring "change fob battery" notice on dash, I had changed the 2032 battery twice but message remained for about 2 weeks so I watched your great video, bought Amazon 2032 batts and the fob is aok and message is gone! THANK YOU!
I had 2 fobs and they both stopped working within months of eachother. I am so glad i found this video and was able to fix my fob in 30 secs. I was planning to go to the dealership tomorrow and pay them 250/key + 150 for programming plus tax 😂 Gave a last shot at googling the problem and this video came up. Im surprised why it didn't show up earlier.
I'm glad it was helpful. What was the issue you had in the key fob? Help share this video in your social media so other people can see. Thanks for your support!
Thank you. Your video saves my $300. Bought old car & second key was not working & red light was not even blinking. I just adjust side metal bar & red light show up.
You are a lifesaver man! Turns out the two plastic nubs holding the battery down on mine were already bent and preventing the battery from making contact with the terminals. Tsk tsk, bad design Honda 😡
Was having problems with my keyfob not connecting for a while. Waonlt sble to start car by pressing keyfob on start button. I saw this video and changed out the Ikea battery i was using with another brand and have had no trouble since! THANK YOU!!
Thank you, thank you, thank you! You just saved me a bunch of money and hassle. My battery was nearly impossible to get out and it turned out that the two little tabs you mention quickly at the beginning of the video were turned down, preventing the battery from connecting. One of them broke off when I tried to flip it up, but the other one is still in tact. The fob worked right away after adjusting those tabs. You saved the day! Thank you so much!!!!!
BRUH!!! You totally saved this FOBS life! I was about to throw it against the wall. lol I had to pry the positive tabes on the side out just a little. And boom redlight came on. Thank You so much!!!
thanks a lot for this, I swapped my key fob batteries 3 times and everytime the key did not work, the amazon basics were out of stock for me so I got energizer ones instead and they got my key fob to work again. Saved me at least 100 dollars.
@@ToolsElectroDIY I changed the battery of my key fob but it wasn't working. Turns out the Great Value batteries from Walmart are not such a great value😜, I just replaced the new battery with another one and then it started working fine.
Thank you very much for the video. I replaced my battery and the fob wouldn’t work. After watching the video I found my positive tab was push in a little to much, pulled it out a little bit and all is well. Thanks
3/15/23. Howdy. Thanks for video. After battery change, car doors open, car starts, but message on dashboard keeps saying "Keyless Remote Battery Low." However, I just checked voltage on VOM and it reads 3.05v. Does the keyless FOB have to be reset in some manner, so far as you know, or what else might be causing the message? Thanks
@@ToolsElectroDIY Howdy. This was our 2021 Honda Civic EX Sedan. But I tried another battery, a SONY testing at 3.3 V, and that seems to have cured the warning problem on the dashboard of the car. Thanks again.
Thanks so much! I was sure I needed a new Key fob then watched your video. For me, it was the two conducting pieces that touch the outer edge of the battery, not making contact. I used a thin screw driver and wedged them out a little and magically my key fob came back to life!!! One less expense this week!
I hope this helps somebody. I replaced the key fob battery but remote start would not work. YOU MUST TAKE THE KEY FOB TO YOUR CAR and use it there a couple times. That will reprogram it. I noticed there were no more “low battery” warnings. When I got home from my errand, remote start was working again. Praise GOD because it’s cold out now.
I had a similar issue! Replaced with a new energizer battery and tried 3 different new batteries and it didn't work. Turns out the two tabs had got folded in and weren't making contact with the positive side of the battery. Thank you!
Our Honda pilot was not responding to either remote. The 3 volt remote batteries were removed and tested at 3.5 Volts, so they should have been working just fine. After watching your video, I changed the batteries out with new batteries; now the vehicle responds to both remotes. An interesting note is that both of the new 3 volt batteries tested at 3.95 Volts right out of the package. So one might surmise that the remotes actually need closer to 4V, despite what the manuals say. Hope this helps someone.
The battery just died and I replaced it with a Duracell battery but doesn’t work, and after several attempts I finally found your video and I replaced the battery with a different brand (Panasonic) and the key fob works perfectly, thanks again for your video
I was looking everywhere for a reason why my key fob wasn’t working. I had my car for 9 months and the battery was low already so a guy from autozone helped me replace it. It worked fine at first but the next day I couldn’t unlock my door and it kept beeping and lighting up as if continuously locking and unlocking. I had to constantly take the battery out and put it back in for it to work but I wanted to avoid going to the dealership (they honestly never fixed anything I needed done and charge me for things I didn’t need) Anyways I notice the prongs was down after watching this video, so I lifted it up a bit and it worked, but time will tell. I’ll give it the next day to see if it still works
Thank You! Had the same problem with some Duracell 2032's. Wouldn't work properly in neither a Honda Civic key fob nor a Kia Niro's. Bought some Energizer 2032's, and they worked right away. Some kind of design flaw with the Duracell's - they're not dead, tested them with a voltmeter. Just a fraction too small.
I bought some new good quality (Duracell) batteries and found that they didn't work. What I found was that although I had inserted the battery correctly, because the + symbol was not between the two contacts (as shown in the video), the remote did not work. So before you give up ensure that the battery is rotated to the correct position as I was nearly pulling my hair out over this!
Great video! I managed to get mine to work with the comment from the 2 plastic tabs to be folded down (guess I installed the battery without too much care).
Appreciate the video, but my 2020 Ridgeline key fob "eats" batteries. I get the low battery warning, change to a new battery, and within another week the battery is failing again. Fob always starts working again with new batteries, but fails soon after. I have gone through a dozen batteries in the last few months. Suggestions?
Update I went to another auto zone to get more batteries they didn’t have them As I was leaving I saw an O Reilly auto parts store. I went in and explained to the woman behind the counter my problem she opened it up smiled and said well they put it in backwards. She turned it over and told me to check my car. It works perfectly now. Should I tell the two Auto Zone guys don’t want them to feel bad but could save someone else this problem.
Thank you SO much for this!!! I kept putting in new batteries and it wouldn't work. Just watched your video and found that the flap was bent and in the way. Fixed that and it worked!!
Glad I could help! Your comment made me feel the time spent making this video totally worth it! Please smash the like and sub! It really helps my channel! Thank you!
All man the keyfob I have the lock button doesn't work but all the other button works so obviously it's not the battery I guess maybe so water, direct sunlight or maybe me and my fiance must of pressed the button too hard either way it's a broken button idk if the dealership will be able to fix it or have to get a new key. What do we do 🥺
testing battery voltage swing on/off load or internal resistance (current capability under load) is more important than (almost) open circuit voltage for vehicle remotes
I was not able to use the key FOB after changing the batt twice. They were prob of a cheap brand. I had to use a brand name one and it instantly worked! Note: It was working fine for months after the last time I changed the batt, but it just would not work one day. There were no "symptoms" leading up to the day that it stopped working. I did check the voltage of the batt, and it was still over 3.0 Volts.
What happens if I already change the battery, but there is no red light at all, I don’t know if it’s the quality of the battery or it’s another problem Hope you can help me solve the problem
Here's my experience. I replace the battery and still does not work. I have to drain the battery down to 3V in order for it to work. When I test brand new battery voltage is about 3.3V. I then drain it slightly using my voltmeter battery checker and get it down to 3V. Guess what, it then works. I've had to do this on Honda and Toyota key fobs. I'm guessing the fob has a voltage regulator that won't allow it to work if the voltage is too high.
Amazon basics battery works, but feels like it only last for 2-3 months. Not sure if everyone is seeing the same. Are there any other recommendation for better 2032 that last longer??
Amazon Basics CR2032 amzn.to/3px5mVL
The Amazon Basics CR2032 3 Volt Lithium Coin Cell Battery works the best for my Honda Odyssey key fob.
Follow me on Amazon www.amazon.com/shop/ToolsElectroDIY/ (Daily Live stream)
Instagram instagram.com/ToolsElectroDIY/
As an Amazon Associate I earn from qualifying purchases.
The Amazon battery is much thinner than a Duracell and does not give as good an electrical connection. The Amazon battery I installed did not work or worked for a brief moment. then I discovered it is too thin to work in Honda remote. Lousy batteries! Duracel battery is thicker and putting in a Duracell solved my problem with el cheapo Amazon battery.
@@daviddesmond2143 thanks for sharing your experience!
Finally someone who got to root cause of the problem! I had gone through so many videos and articles! Almost went to the dealer. Thank you!
Glad I could help! What was the issue in your key fob?
Thank You! I was thinking the batteries were bad, but then you showed me that the connectors weren't connecting. Thank you sir, you are a scholar and a gentleman!
Awesome I’m glad you find it helpful.! Smash the like button it really helps my channel. Thank you.
That's exactly what was wrong with my key fob the connection!! Thank you soooo much!!! 😊
Awesome it worked for you too!
Turns out the issue I was having was that the little plastic tabs holding the connection plate for the positive were bent down preventing the battery from touching that plate! Thank you for the info. You saved me a couple hundred bucks!
wow it's a pretty common issue!
Thank you so much. I replaced the battery and i had the same issue. Was looking for something that could help me and i found your comment,I checked and definitely it was the problem
OMG You’re the BEST. My son’s wife accidentally soaked my son’s Honda HRV fob in the ocean. He brought it to me because it wasn’t working (lock/unlock/trunk open/close buttons not working. I replaced the 2032 battery (Panasonic brand)but still no go. Then I noticed the red led light wouldn’t even blink. You pointed out the possible poor contact along the sides of the battery. I slightly bent those contacts towards the edge of the battery and that solved the problem. The water exposure issue was very brief and there was little if any water in the fob. I think that water issue diverted our attention away from the primary problem. Many thanks for posting your video.
I'm glad it was helpful!
THANK YOU SO MUCH! I have spent a solid 2-3 hours, countless videos, websites and a world of frustration and defeat over this issue. You have given me peace! ❤️🥳
Glad it worked! What caused your key fob issue?
this video and these comments saved me so much money and heartache. it was the two plastic black pieces that were folded down as many people said was the issue for them. i used some tweezers to move them out
of the way, then i put the battery in at an angle so that the battery was touching the back piece first before snapping it in. all of the sudden it worked again! thank you!
Excellent I’m so glad it worked for you too! Like and subscribe!
I love TH-cam and the comments section! Black plastic pieces for me too!
@@kellymaloney6119 I’m surprised that a lot of people are experiencing the same issue
This worked perfectly for me! Those two TINY black plastic tabs that are supposed to hold the battery in place were bent down (broken) & preventing the bottom (negative) from making contact with the little spring loaded u shaped terminal when the battery was snapped into place. I just folded those tabs back, snapped them off, they’re completely unnecessary, put the battery back in… Bingo works like new!!
Thanks for the video!
Amazing, I'm glad it was helpful!
Bro, yes! We're back. Great tip to go along with this video. Thanks gents
Thank you so much. I couldn't understand why my key fob wasn't working right after changing the battery. Your explanation of how everything works made me check my battery again. I found that it was just a hair off in the slot. Now I can lock, unlock and turn my car on by the buttons on the key fob. So, thank you so much.
Glad to hear it worked for you!
I changed a couple of Honda Fit key fob. One of them won't light up after installation of battery. I though I damaged the key fob during replacement and almost decide to buy a replacement key fob. After watching, I realized the common issue of the positive mental flaps were bent, using a tweezer to open the metal flap allowed my battery positive side to have contact, and the light is now lit and my key fob works like a charm. Thanks for saving me a few hundred dollars in dealership. Nowadays everything cost arms and legs, LOL!
I'm so glad it worked for you too!
You saved the day for posting this video and kept $200 in my pocket! Can’t thank you enough. The dealer couldn’t even figure out that it was the battery connection (yet maybe they could, they just thought that I would order a whole new key fob).
I'm glad it was helpful! Smash the like and subscribe :)
You saved the day! The positive contacts were flat and not making contact with the battery. A little wiggle and it works as new. Thanks, dude!
Amazing! I’m so glad it was helpful! Smash the like and subscribe!
Thank you for your video! It is the only one that helped me. I had been replacing batteries for over an hour and nothing worked. Then I watched your video and realized my prongs were down and the battery wasn’t making a connection! Now it works perfectly! 😊
I’m so glad it was helpful! Smash the like and subscribe!
Thanks for this video- my issue was the two plastic tabs you mentioned that got folded down. You have saved me much time and probably money.
I’m so glad it was helpful! Smash the like please!
Yup. Thanks to this video, I too, saved a couple hundred dollars that would have gone to my Honda dealership (just for a FOB key fix)!
I locked my 2004 odyssey while running yesterday and spare key fob did not work. After replacing the battery I realized the red light wasn’t coming on. It wasn’t a bad battery either. I cleaned the contacts and battery surface with DeOxit contact cleaner still no red light on fob. Thank you for the small detail about the plastic clips aligning the battery inside the fob (esp the positive connections). One of the plastic clips actually broke off but I could see that caused the battery to be poorly positioned. Once I slid the battery in place I made sure to get the + connection tight and that made all the difference. The red light flashed every time and my spare key fob now works perfectly. This was a great help
TY
I'm glad it was helpful. Please smash the like button, thank you for your support!
I thought I had to get a new keyfob but the black little tabs were folded down. That prevented the battery from actually making contact with the back piece. Easy fix. Thanks for the video.
I'm glad it helped you too!
Thanks a bunch. This worked. For future reference to Honda S2000 owners the two very small positive prongs had backed off over time since 2001. Even a new tested energizer CR2025 had no effect. I was just about to buy a new key fob when I ran across your video. I took a tiny flathead, bent the two positive prongs forward just a bit and voila! Back to normal. Over about 4 to 5 months I noticed the buttons would sometimes work and sometimes not. It gradually got worse until today when it flat gave out. The 2 positive prongs pushed outward just a hair was enough to make solid contact once again. Subbed and liked!
Awesome! Thanks for sharing your experience and tips. I'm sure it's going to be super helpful for other Honda owners!
Kept searching until I found something that worked. You’re awesome. Both of my keys weren’t working. The connection wasn’t connecting. Thank you thank you thank you so much.
Glad I could help
I thought that this video was so stupid but then I took a second to think because I know I put a new good battery in my key fob. Maybe my buttons were misaligned and that’s exactly what happened when I changed my battery my buttons became slightly misaligned, and they stopped working for that reason because they weren’t fully depressing the button, thank you for this video. It helped and save me a ton of money. Thank you so much five stars two thumbs up and a happy viewer 😁👍👍
Thanks for your comment. It always helps when you stop and think for a few minutes for a solution.
This TRANSFORMED my Honda key-fob! - thank you so much - who knew that not all cells are equal?!
Thanks for sharing I’m glad you find it helpful.
I have a 2020 Honda CR-V. Although I had changed the battery 3 times, it still kept showing "low battery". I was about to take it to the dealer because I thought there must be something wrong with the key fob. After watching your video, I tried it with the Amazon Basics battery, problem SOLVED! Thank you so much for doing this video and for saving me a lot of money!!
I’m so glad it was helpful to you too! This is exactly the reason I posted this video to help those with the same issue. Smash the like and subscribe. Thank you very much for your support.
This video just saved me $162 for a diagnostic at the dealership! Thank you!
I’m so glad it helped you too
This WORKED! I had to get a pen and pry the little metal pieces/tabs and then the red light blinked. Thanks for the tutorial!
Glad it helped!
It just worked great for me .... 2015 Honda Crosstour had a recurring "change fob battery" notice on dash, I had changed the 2032 battery twice but message remained for about 2 weeks so I watched your great video, bought Amazon 2032 batts and the fob is aok and message is gone! THANK YOU!
Amazing, I'm glad it worked for you too!
I had 2 fobs and they both stopped working within months of eachother. I am so glad i found this video and was able to fix my fob in 30 secs. I was planning to go to the dealership tomorrow and pay them 250/key + 150 for programming plus tax 😂
Gave a last shot at googling the problem and this video came up. Im surprised why it didn't show up earlier.
I'm glad it was helpful. What was the issue you had in the key fob? Help share this video in your social media so other people can see. Thanks for your support!
Thank you so much for this! I was literally panicking a little bit but your video helped me so much. You’re awesome!
My pleasure!
Thank you. Your video saves my $300. Bought old car & second key was not working & red light was not even blinking. I just adjust side metal bar & red light show up.
Awesome!!
Much thanks. As with other people in the comments, I was at the end of my rope. A change in brand of battery solved the problem. You saved the day.
I’m so glad it worked for you too!!!
You are a lifesaver man! Turns out the two plastic nubs holding the battery down on mine were already bent and preventing the battery from making contact with the terminals. Tsk tsk, bad design Honda 😡
I’m glad it was helpful. Thanks for sharing your experience.
Was having problems with my keyfob not connecting for a while. Waonlt sble to start car by pressing keyfob on start button. I saw this video and changed out the Ikea battery i was using with another brand and have had no trouble since! THANK YOU!!
I'm so glad it was helpful! Smash the LIKE and SUB :)
Thank you, thank you, thank you! You just saved me a bunch of money and hassle. My battery was nearly impossible to get out and it turned out that the two little tabs you mention quickly at the beginning of the video were turned down, preventing the battery from connecting. One of them broke off when I tried to flip it up, but the other one is still in tact. The fob worked right away after adjusting those tabs. You saved the day! Thank you so much!!!!!
Glad it helped you! Please help smash the like button so other people are more likely to see this video
Holy crow. I was about to go to the dealer. This video saved me 200 dollars. Thank you!
Glad I could help. What was the key fob issue you had? Smash the like button, it will help my channel.thanks for your support!
@@ToolsElectroDIY done! Liked and subscribed. It was the tabs and the battery not making proper contact. Thank you so much! I have this video saved 🙏
BRUH!!! You totally saved this FOBS life! I was about to throw it against the wall. lol
I had to pry the positive tabes on the side out just a little. And boom redlight came on.
Thank You so much!!!
Glad I could help! Smash the LIKE and SUB!
THANK YOU!!! I did not know about those plastic pieces that get in the way!!! You saved me so much time and money!!!!
Glad to help!
thanks a lot for this, I swapped my key fob batteries 3 times and everytime the key did not work, the amazon basics were out of stock for me so I got energizer ones instead and they got my key fob to work again. Saved me at least 100 dollars.
I’m glad you find it useful! Smash the like button it really helps my channel!
Thank you. Didn't know inserting at an angle mattered. Works now. Much appreciated!
Glad it helped!
This fixed my 2019 Honda Ridgeline fob. The little tabs were bent preventing contact. You save me a bunch of money and aggravation. Thanks.
I’m glad it helped!
Your video was the only one that explained things and saved me! Thank you so much. 😅
I’m glad it was helpful. Please let me know what was the issue that caused your key fob to stop working
THANK YOU! The little tabs were folded down in the battery holder! Ha! I've never had that happen! AWESOME! Thanks again!
Glad I could help!
Thank you. Saved a trip to dealership. The positive did not quite make contact in my case.
Thanks to your video. I found the solution of my problem within an hour.
I’m glad it was helpful. What was the issue you had?
@@ToolsElectroDIY I changed the battery of my key fob but it wasn't working. Turns out the Great Value batteries from Walmart are not such a great value😜, I just replaced the new battery with another one and then it started working fine.
Thank you very much for the video. I replaced my battery and the fob wouldn’t work. After watching the video I found my positive tab was push in a little to much, pulled it out a little bit and all is well. Thanks
Glad to help
Thank you! My tabs were pushed down and I couldn't see it, you saved me from buying a new fob!
Yeah!!! So glad this video helped you too! Share it with your friends!
Saved me a trip and a lot of money to Honda, thank you for this!!
Glad it helped! What was the issue with your key fob?
Thank you. Replaced the ‘new’ battery for another and it works perfectly now.
I'm glad it was helpful!
This video really helped me when my battery didn’t work thank you.
Just curios, what was the issue with your key fob? I'm very glad it helped!!! LIKE and SUB!
Mine had the issue with the positive connector bent out too much. Saved me a lot of hassle, thanks!
Glad it helped! Smash the LIKE so more people can see this video. Thanks
3/15/23. Howdy. Thanks for video. After battery change, car doors open, car starts, but message on dashboard keeps saying "Keyless Remote Battery Low." However, I just checked voltage on VOM and it reads 3.05v. Does the keyless FOB have to be reset in some manner, so far as you know, or what else might be causing the message? Thanks
What is your car model? I don't see that message.
@@ToolsElectroDIY Howdy. This was our 2021 Honda Civic EX Sedan. But I tried another battery, a SONY testing at 3.3 V, and that seems to have cured the warning problem on the dashboard of the car. Thanks again.
@@jrockafellow1971 I think the arrow may take some time to clear you just need to drive the car a little bit.
Thanks!
I'm glad it was helpful. You are amazing!!! Thanks for the $2 tip!
You’re a life saver. THANK YOU 🙏🏻
Happy to help! What was the issue you had with the key fob?
Thanks so much! I was sure I needed a new Key fob then watched your video. For me, it was the two conducting pieces that touch the outer edge of the battery, not making contact. I used a thin screw driver and wedged them out a little and magically my key fob came back to life!!! One less expense this week!
I'm so glad it worked for you! That's exactly why I posted this video to help those who have the same problem! Smash the LIKE and SUB!
Thank you, this helped me troubleshoot the problem. As you described, its the battery problem even if its new.
wow good to know, thanks!!
Yo thank you so much bro ❤ Called Honda and they advised me to wait until Monday to bring the car to the dealership!!
Glad I could help
I hope this helps somebody. I replaced the key fob battery but remote start would not work. YOU MUST TAKE THE KEY FOB TO YOUR CAR and use it there a couple times. That will reprogram it. I noticed there were no more “low battery” warnings. When I got home from my errand, remote start was working again. Praise GOD because it’s cold out now.
Thanks for sharing!
@@ToolsElectroDIY Very welcome!
It helps to put the positive side towards the plus sign…
My auto start won't work, lights won't flash when locking. Do you mean be close to the car and unlock it /lock it with the fob
My light keeps blinking, what does that mean
I had a similar issue! Replaced with a new energizer battery and tried 3 different new batteries and it didn't work. Turns out the two tabs had got folded in and weren't making contact with the positive side of the battery. Thank you!
I'm glad you found it useful! Smash the like button it really helps my channel, thanks!
Thank you. You saved me a hundred dollars! Mine was the positive side issue, not properly connected to the battery.
Excellent I’m glad it was helpful!!
THANK YOU!!! The positive connection was my issue!
Glad it worked!
Our Honda pilot was not responding to either remote. The 3 volt remote batteries were removed and tested at 3.5 Volts, so they should have been working just fine. After watching your video, I changed the batteries out with new batteries; now the vehicle responds to both remotes. An interesting note is that both of the new 3 volt batteries tested at 3.95 Volts right out of the package. So one might surmise that the remotes actually need closer to 4V, despite what the manuals say. Hope this helps someone.
Thanks for sharing this information
Works! I sprayed computer dust spray and it works perfectly! Thank you!
Amazing thanks for letting me know
Thank you for helping me through a nervous breakdown about this stuff
Glad to hear that! What did you do to fix it? Please share.
So helpful! Thank you so much! The black tabs were blocking the connectors
I’m glad it helped you too
My issue was the tabs were folded down. Thank you!!!
I’m glad it was helpful. Sounds like it’s a very common.
Another frustrated Honda owner you've saved here with this video, thanks!
Glad to help
Thank you so much! You saved us $200.
My pleasure
Plastic tabs were bent down, great video!
Glad it was helpful!
Thanks for sharing this, I had the exact problem, thanks to you I’m saving a lot of money
Which problem did u have?
The battery just died and I replaced it with a Duracell battery but doesn’t work, and after several attempts I finally found your video and I replaced the battery with a different brand (Panasonic) and the key fob works perfectly, thanks again for your video
I was looking everywhere for a reason why my key fob wasn’t working. I had my car for 9 months and the battery was low already so a guy from autozone helped me replace it. It worked fine at first but the next day I couldn’t unlock my door and it kept beeping and lighting up as if continuously locking and unlocking. I had to constantly take the battery out and put it back in for it to work but I wanted to avoid going to the dealership (they honestly never fixed anything I needed done and charge me for things I didn’t need)
Anyways I notice the prongs was down after watching this video, so I lifted it up a bit and it worked, but time will tell. I’ll give it the next day to see if it still works
Good to know, let me know how it goes!
This was helpful. For me the plastic tabs bent down and got in the way of the battery - thanks!
I'm glad it was helpful!
Thank you! My problem was not having it push the sensor when putting in the new battery
I’m glad it was helpful smash the like button, it really helps my channel and get more people to watch this video
Brand new Duracell from Costco didn’t work. Ordered Amazon basic. Wonder if it has something to do with the bitter coating on the Duracells.
Good luck!
Thanks dude you just saved me $700 .....legend thanks for sharing 😊
Glad I could help! Smash the like and sub ;)
Super helpful...saved me buying a new remote
Great to hear! What was the issue in your key fob?
Thank You! Had the same problem with some Duracell 2032's. Wouldn't work properly in neither a Honda Civic key fob nor a Kia Niro's. Bought some Energizer 2032's, and they worked right away. Some kind of design flaw with the Duracell's - they're not dead, tested them with a voltmeter. Just a fraction too small.
my pleasure
I wish I seen this video last time
I replace my key fob battery was not working
This time same thing.
Folded up the plastic tabs and bam good as new 💯
Thanks. Smash the like and subscribe!
You are a god the prongs were folded down and you saved me
I’m so glad it was helpful!
I bought some new good quality (Duracell) batteries and found that they didn't work. What I found was that although I had inserted the battery correctly, because the + symbol was not between the two contacts (as shown in the video), the remote did not work. So before you give up ensure that the battery is rotated to the correct position as I was nearly pulling my hair out over this!
Very odd, thanks for sharing!
Bent terminals for me. Thanks man!!
That’s the most common issue! Glad it was helpful!
Great video! I managed to get mine to work with the comment from the 2 plastic tabs to be folded down (guess I installed the battery without too much care).
I’m so glad it helped you too! Smash the like and subscribe!
Thank you! My issue was the two plastic tabs.
Glad it helped!
Thank you. My tabs were bent back on the side contacts for the battery.
That’s the most common issue!
Great video! The black pieces to hold the battery in got folded down for me and were blocking the silver piece
I'm glad it was helpful!
Thank you so much!!! You saved me, my time and my money👍👍
Glad I could help! Just curious, what was the issue of your key fob?
I didn't believe that it would make a difference in using a different brand of battery but my experience now agrees with your claims. Thanks!
I'm glad it worked for you!
Appreciate the video, but my 2020 Ridgeline key fob "eats" batteries. I get the low battery warning, change to a new battery, and within another week the battery is failing again. Fob always starts working again with new batteries, but fails soon after. I have gone through a dozen batteries in the last few months. Suggestions?
It sounds like the keyfob has internal issues that drains the battery. In this case it may need to be replaced.
It still says I need new battery and says to hold next to start button it works then but light for new battery still on😊
It may disappear after a while
Update I went to another auto zone to get more batteries they didn’t have them As I was leaving I saw an O Reilly auto parts store. I went in and explained to the woman behind the counter my problem she opened it up smiled and said well they put it in backwards. She turned it over and told me to check my car. It works perfectly now. Should I tell the two Auto Zone guys don’t want them to feel bad but could save someone else this problem.
You were right, you saved me hundreds of dollars! Thank you!😆
Glad I could help!
This was my problem, the tabs were pushed too far back to make connection. Thank you!
Glad it was helpful!
Thank you SO much for this!!! I kept putting in new batteries and it wouldn't work. Just watched your video and found that the flap was bent and in the way. Fixed that and it worked!!
Glad I could help! Your comment made me feel the time spent making this video totally worth it! Please smash the like and sub! It really helps my channel! Thank you!
I am having same issue my honda accord 2002 key fob stops working after pressing few times I just bought the new battery today from Canadian tire
I hope it works for you!
Thank you! energizer wouldn’t work but a sunbeam works fine.
Thanks for sharing your experience!
All man the keyfob I have the lock button doesn't work but all the other button works so obviously it's not the battery I guess maybe so water, direct sunlight or maybe me and my fiance must of pressed the button too hard either way it's a broken button idk if the dealership will be able to fix it or have to get a new key. What do we do 🥺
I guess only the dealership will be able to help you.
The plastic tab was bent I fixed it then it worked. ❤ you
I’m glad it helped!
This actually worked. Thank you!
What was the issue you had?
@ToolsElectroDIY yes. Poor design. You saved me!
testing battery voltage swing on/off load or internal resistance (current capability under load) is more important than (almost) open circuit voltage for vehicle remotes
Not everyone has a multimeter at home. I provided a few simple steps to trouble shoot the issues in the video without using any instruments.
I was not able to use the key FOB after changing the batt twice. They were prob of a cheap brand. I had to use a brand name one and it instantly worked! Note: It was working fine for months after the last time I changed the batt, but it just would not work one day. There were no "symptoms" leading up to the day that it stopped working. I did check the voltage of the batt, and it was still over 3.0 Volts.
Thanks for sharing the info.
I seem to get a warning at 2.8v. Also, after dropping the remote I’ve gotten a low battery warning. This has happened twice.
Did u fix it?
Thank you so much for the tip..very helpful!
I’m so glad it was helpful. That’s why I uploaded this video smash the like and subscribe.
What happens if I already change the battery, but there is no red light at all, I don’t know if it’s the quality of the battery or it’s another problem
Hope you can help me solve the problem
Pls watch the full video. There are 3 common problems.
Here's my experience. I replace the battery and still does not work. I have to drain the battery down to 3V in order for it to work. When I test brand new battery voltage is about 3.3V. I then drain it slightly using my voltmeter battery checker and get it down to 3V. Guess what, it then works. I've had to do this on Honda and Toyota key fobs. I'm guessing the fob has a voltage regulator that won't allow it to work if the voltage is too high.
Wow, that is a very interesting finding! Thank you very much for sharing your experience.
Amazon basics battery works, but feels like it only last for 2-3 months. Not sure if everyone is seeing the same. Are there any other recommendation for better 2032 that last longer??
The battery life seems fine to me.
@@ToolsElectroDIY how many months are you seeing on a average from a 2032 inside key fob?
@@RamgopalSekar at least a year. maybe 2 years.