hope u will fix it bro! fingers crossed 4 u! this is so much fun car, i have the same one and its beautiful. Watching every your video! You're doing great, keep it up!
@ If u r planning to add some stuff in a future, take a look on invidia q300 exhaust system ( its not annoyingly loud, without metallic noise like cobra or some other, its definitely worth its money. I enjoy every single second driving with this exhaust. Sort of rally car sound ). Forge motorsport intake kit, with high flow intake pipe and milltek downpipe. Its not for all money in the world, reasonably priced, and sounds great! Cheers!
All modules will read the voltage. The fact they’re all reporting it points to the battery itself. It’s very common to see this. Swap out the battery rather than jumping it. Also, make sure you register the new battery (and if you update the mah that needs recording too).
@@jacobbaggott1 I’m sure it can. Just remember there are two places. First to register the date the battery was installed. Second to register the capacity. The car has a variable output alternator so uses those two bits of data to identify if the battery is aging and to know what 100% charged is. If either of the values in the cars memory are wrong you run the risk of overcharging / undercharging the battery.
I fix minis full time , the airbag faults wont stop it starting and ive never saw one with a pyro fuse , does engine turn in gear? If not its seized on the bottom end from loss of oil on the oil cooler damage , interesting to see the outcome good luck with it
i think everyone else in the comments have already suggested common things to check out. but yes, the basics are having a fully charged good CCA battery, check and rotate the engine manually from the crank pulley (if you can). check starter motor operation, maybe that got pushed back in the impact or something. check all your fuses and voltage to essentials like starter motor. look forward to seeing what you find. was there signs of oil starvation when you got the car?
@@sk8guitardrums thanks for watching and commenting! Much appreciated and great advice! Next video will reveal a lot! There was oil still in the sump when I drained it 👌🏽
great video! The one thing I do want to point out is that at the end of the last video you said "I'm going to remove the arch liners and call it a night". I can see in this video you didn't remove the arch liners
Battey too low at 7v even with a charge off vehicle .. if battery has dropped a cell it won't work .. try charging battery if not new 🔋.. also check starter motor . Hand rotate engine
Steering angle sensor will reset when you driver it , you must do a lock to lock
100% get a socket on the engine and try turning it over first it could be locked up, fingers crossed its not
hope u will fix it bro! fingers crossed 4 u! this is so much fun car, i have the same one and its beautiful.
Watching every your video! You're doing great, keep it up!
I appreciate it!
@ If u r planning to add some stuff in a future, take a look on invidia q300 exhaust system ( its not annoyingly loud, without metallic noise like cobra or some other, its definitely worth its money. I enjoy every single second driving with this exhaust. Sort of rally car sound ).
Forge motorsport intake kit, with high flow intake pipe and milltek downpipe.
Its not for all money in the world, reasonably priced, and sounds great! Cheers!
All modules will read the voltage. The fact they’re all reporting it points to the battery itself. It’s very common to see this. Swap out the battery rather than jumping it. Also, make sure you register the new battery (and if you update the mah that needs recording too).
I’m pretty sure my reader can register battery’s I’ll have to look
@@jacobbaggott1 I’m sure it can. Just remember there are two places. First to register the date the battery was installed. Second to register the capacity. The car has a variable output alternator so uses those two bits of data to identify if the battery is aging and to know what 100% charged is. If either of the values in the cars memory are wrong you run the risk of overcharging / undercharging the battery.
@@adamkonrath919 brillant thank you for the info 🫡
Coming along nicely 🙌🏼
I fix minis full time , the airbag faults wont stop it starting and ive never saw one with a pyro fuse , does engine turn in gear? If not its seized on the bottom end from loss of oil on the oil cooler damage , interesting to see the outcome good luck with it
@@jtjt4382 yeah I saw when researching they don’t have pyro fuses!
Thank you! Next video out in a day or so !
i think everyone else in the comments have already suggested common things to check out. but yes, the basics are having a fully charged good CCA battery, check and rotate the engine manually from the crank pulley (if you can). check starter motor operation, maybe that got pushed back in the impact or something. check all your fuses and voltage to essentials like starter motor. look forward to seeing what you find. was there signs of oil starvation when you got the car?
@@sk8guitardrums thanks for watching and commenting! Much appreciated and great advice! Next video will reveal a lot!
There was oil still in the sump when I drained it 👌🏽
great video! The one thing I do want to point out is that at the end of the last video you said "I'm going to remove the arch liners and call it a night". I can see in this video you didn't remove the arch liners
Thank you! haha good spot I may of got tired and gave up that night haha!
It's great knowing what happens next 😉. Can't wait for the next one 😁
sickkkkkkk
Check if there is 12v at the starter
T’s the cas module
Battey too low at 7v even with a charge off vehicle .. if battery has dropped a cell it won't work .. try charging battery if not new 🔋.. also check starter motor . Hand rotate engine
Does it have a Main Pyro Fuse which could blow after the crash?? Worth a look!!
@@nickmitton7350 after researching apparently these year jcw don’t have a pyro it’s the newer models that do
Turn by hand ,,no pyro see if there’s any crash data to delete
Check your pyro fuse
@@waynecraig7666 after doing some research apparently this year mini do not have pyros apparently and can’t see anything!
Hope it’s not siezed engine.
can you spin the motor by hand? sounds like its locked
@@AndyPipkin-dj8sy 😬
Pyrho fuse...
Pyro fuse
After researching these cars don’t have a pyro unless they are the new models apparently
Jump leads straight to the starter 🫡