Thank you so much for this complete and detailed video. I was having some questions with my new M550, but now I know how to do a good installation on my car.
Thank you for that review, it helps me a lot cause I'm an Uber Driver. Also, I can mount it where it's also hidden from view. I have a Vantrue N4 3 Channel Dashcam but, since I bought an older Ford Explorer, the cord is just too short to get to the cigarette lighter power. So, I like this dash cam because, the cord seems a lot longer and the dash cam is more portable and small.
In Park Monitor, there are 3 options for the Azdome M550 Dash Cam: 1. Time Lapse Parking Mode 2. Motion Detection Parking Mode 3. Collision Detection Parking Mode • When I click one, the other goes off. • All 3 can’t be on at the same time, is that right? • Which one should be on when driving? • Which one should be on if I’m not in the car and someone hits it in a parking lot? • Do you have to change to another Parking mode if you’re not driving? Please explain. Thanks
Hi Pat. Don't get used to this short comment, but all I have to say is "Well done!" 👍👍 Now when I tell you to "Save the Wave🙋♂" you can go to the video tape and prove to me that you've been doing The Wave🙋♂ 🤣
Good camera , but G-sensors sucks, its hard to trigger it when it set to detect collision detection. If you are really focused on collision detection parking mode not chose this camera. Other functions just works as expected.
Good morning, I installed the Dashcam M550 pro, with the AZDOME connection kit with fuses, the camera heats up and it does not record everything, it records about 1 hour in a day. It is new with the SD card provided. Mercedes GLA x156 vehicle year 2019.
hello, i bought the same cam, also i bought the same wire kit, but on my kit is red wire on full power, and yelllow wire is with label acc. Cam doesnt function well. Sometimes it starts automaticaly and sometimes not. Also parking mode doesnt work. In my manual is writen the same labels, red wire constant streem, yellow accesory. Could be it incorrect on two places?
This cam keeps stopping in the middle of recording... sometimes it could be 10 seconds in, 20 secs in, or a minute... but it would just randomly stop recording and takes about 5 seconds to restart and then go again and again... Already tried different SD cards.. and updated firmware... and it still continues to do the same thing... This caused me to miss an almost accident on the road.. Is there a fix?
Make sure the screen is active. If it's blank, press any button to wake it up. Then, press and hold the up arrow button for 2 seconds to lock the current video. A lock should appear on the screen to show it's been saved.
Becarful people you need a key start vehicle to use the 3 parking modes and hard wire sold separately because you need to put key in and turn to lock position 😉 very sneaky
Hi Pat, I just purchased this dashcam two weeks ago and finally just installed it today. I got question regarding the hardwire. I purchased both M550 & JYX02 kit. I don't have experience on installing myself so I drive to nearby car audio technician to play safe. During installation I realize he skipped using the tap. The technician is using my android car player power where he connected the red to red, yellow to yellow and black to ground. Will this also consider hardwire and enable park mode?
In order to test if the installer did it correctly, use the AZDome app to view your videos. If the car is turned off and there is video recorded, then it is hardwired correctly.
Can somone go over the parking mode? I have it wired correctly but I do not think it is working as intended. I have it set to time-lapse while parked but it does not turn to video when acc is turned on like the Manuel says
Per 1:24 I had purchased 3 different things. The hardwire kit, the dashcam and the mount. All 3 of these don't come with a dashcam purchase. I'll update the video description to include the link to the wire that connects to the fusebox. amzn.to/3ALvCSs
Thank you! I got this dashcam few months ago, but last week I bought the hardwire cable. Are you using any of the switch for prevent battery drain? When my car is off battery gives me 11.6v...
I'm not using a switch. I let the hardwire kit stop power to the dash cam when the DC voltage drops. My battery is typically weak if I let the car sit for a few days.
@@PatsGarageOnline yes, the hardwire has a module where you select the voltage where you wish the camera stops to receive power. The minimum value is 11.8v, when battery is below that, the cam stops recording. I'm afraid that if I don't set any drain protection my battery will be drained. Normally I use the car every two-three days.
The way you showed in the video to power the cam using the hardwire kit, you incorrectly installed one of the fused tap cables. One of those taps is bypassing the fuse, which of course is a fire hazard. Please correct your video to show which pronged connection is the source and which is the load sides. Thank you.
Do you have issue setting up the app? I went through the process and arrived at the apps main screen and the dashcam was recognized. However, when I pressed the record option or the name of the device, I kept getting the message "..Please off the wifi DVR" or something and then then the wifi screen popped up. I check the screen and the dashcam was hooked up via wifi. Any clue? Thx
I'm sorry to hear you are having this issue. I have not experienced this and don't know how to troubleshoot it. I would recommend contacting the manufacturer.
Nice video! Do you know how to get the screen to completely to turn off while I drive? Whenever I turn the screen off when driving it keeps coming on like 20 seconds later
This can happen if you selected motion detection in the settings. Go to 18:20 in the video and watch to see where motion detection is unchecked and be sure that yours is also unchecked. You may also need to disable the impact detection to low or off at 19:20 in the video.
Hi Pat, i have a deposit down on a 2016 bmw i8 47,000 miles. Apparently when the dealer took Possession of them car, apparently they replaced the shifter assembly because they said that the car would not go into gear. They said that originally thought the car needed to be reprogrammed, which they had an independent shop do, but they said that the shop misdiagnosed it. Thus the replacement of the shifter assembly. Should I be concerned about this vehicle and would the shifter assembly affect the car not going into gear. Hopefully you see this post and be gracious enough to give me your advice and opinion. Regards. Benjamin
@@PatsGarageOnline I have bought all of them and samsung but it is still the same and I have seen that it is a software problem but nobody knows how to fix it , I spoke with support and they don't know how to fix it either
@@QBAN_BOY Since I've never encountered this problem, I sadly don't know what to suggest. AZDome support should be able to do whatever is possible to make it right.
@@QBAN_BOY I know this post is a couple of months old but I had this happen with another dashcam (not the Azdome) and it would reset all of the camera settings everytime the car started. It turned out to be that the firmware was out of date and had a glitch. That company emailed me the updated firm ware files and I downloaded them to the SD card. Once inserted in the camera, the update happened automatically and never had that issue again. It might be worth asking for the most up-to-date firmware if you haven't been able to fix this issue.
I was g0ing to buy two of these then i realized over priced wanted 36$ more for install kit to hardsire for parking watch for all cameras beware very pricy for full install cancelled my order and no customer service typical china junk
Here's where you can get your own AZDOME M550 3-Channel Dash Cam: amzn.to/3D57KYV
Thank you so much for this complete and detailed video. I was having some questions with my new M550, but now I know how to do a good installation on my car.
Quality looks pretty good! Great install, Pat.
Wow, that's great quality man! Brilliant
You’re the best, man. Watching from Kenya 🇰🇪
Thank you for that review, it helps me a lot cause I'm an Uber Driver. Also, I can mount it where it's also hidden from view. I have a Vantrue N4 3 Channel Dashcam but, since I bought an older Ford Explorer, the cord is just too short to get to the cigarette lighter power. So, I like this dash cam because, the cord seems a lot longer and the dash cam is more portable and small.
It was good to see your video. I bought this set today. I am very curious! Thanks! :)
In Park Monitor, there are 3 options for the Azdome M550 Dash Cam:
1. Time Lapse Parking Mode
2. Motion Detection Parking Mode
3. Collision Detection Parking Mode
• When I click one, the other goes off.
• All 3 can’t be on at the same time, is that right?
• Which one should be on when driving?
• Which one should be on if I’m not in the car and someone hits it in a parking lot?
• Do you have to change to another Parking mode if you’re not driving?
Please explain. Thanks
Hi Pat. Don't get used to this short comment, but all I have to say is "Well done!" 👍👍 Now when I tell you to "Save the Wave🙋♂" you can go to the video tape and prove to me that you've been doing The Wave🙋♂ 🤣
Good camera , but G-sensors sucks, its hard to trigger it when it set to detect collision detection. If you are really focused on collision detection parking mode not chose this camera. Other functions just works as expected.
Good morning,
I installed the Dashcam M550 pro, with the AZDOME connection kit with fuses, the camera heats up and it does not record everything, it records about 1 hour in a day.
It is new with the SD card provided.
Mercedes GLA x156 vehicle year 2019.
Does it work after turning off the car? For safety purposes
Excellent informative upload bud!
Thank goodness you blurred your password👍
hello, i bought the same cam, also i bought the same wire kit, but on my kit is red wire on full power, and yelllow wire is with label acc. Cam doesnt function well. Sometimes it starts automaticaly and sometimes not. Also parking mode doesnt work. In my manual is writen the same labels, red wire constant streem, yellow accesory. Could be it incorrect on two places?
How Good is the magnetic mount for rough bumpy roads?
Very interesting my friend! I Bought one camera like that today!
Love the video! What other fuse can I use besides the cigarette lighter and diagnostic I’m using those for my radar?
Sir can u share the mounting kit u used for rear camera i also need one
Oi bom dia.Qual recurso para manter as imagens direta. Após 2 minutos apaga e não dá pra ver se está gravando, tem que selecionar dentro.
Bonsoir, merci pote cette excellente présentation. Je viens de l’acheter et cela me réconforte
Rear camera performance?
Works well!
Have you tried connecting it directly to your head unit?
This cam keeps stopping in the middle of recording... sometimes it could be 10 seconds in, 20 secs in, or a minute... but it would just randomly stop recording and takes about 5 seconds to restart and then go again and again... Already tried different SD cards.. and updated firmware... and it still continues to do the same thing... This caused me to miss an almost accident on the road.. Is there a fix?
Please reach out to the seller or manufacturer. There's definitely a problem that can't be fixed on our own.
That was an excellent video. What SD card size do you use?
I just bought this and it said you can use up to 512gb
@@action012 thank you so much!!!!
Superr!
Страхотно обяснено, идеална камера.
Do you know how to view video footage? Do you have to take out the sd card? Can I stream to my phone?
You can save to the phone using the AZDome app and connecting to the camera with wifi, or pull from the SD card after plugging it into your computer.
Perfecto 👌 excelente 👌 magnífico 👌
My M550 didn’t come with an inside rear mount. I really don’t want to drill a hole next to my license plate. Any ideas on how to mount it inside?
I had to order it separately before doing this video. AZDOME Rear camera bracket: amzn.to/3Fiig2Z
@@PatsGarageOnline I like your buddy’s idea of using double sided Gorilla Tape. I may try that. Thanks for the reply!!
Подскажите, пожалуйста, какое минимальное разрешение записи можно выставить и какой при этом средний битрейт получается?
Can the speed display in that dashcam be removed?
I don't believe so. I have a DDPai Mini 3 dashcam in my supercar and no speed is recorded.
CAN I USE YOUR VIDEO ON MY CHANNEL?.
Does anyone know how to save an event? I can't find it anywhere.
Thanks for any answers!
Make sure the screen is active. If it's blank, press any button to wake it up. Then, press and hold the up arrow button for 2 seconds to lock the current video. A lock should appear on the screen to show it's been saved.
@@PatsGarageOnline great! Thanks so much!
Becarful people you need a key start vehicle to use the 3 parking modes and hard wire sold separately because you need to put key in and turn to lock position 😉 very sneaky
Hi Pat, I just purchased this dashcam two weeks ago and finally just installed it today. I got question regarding the hardwire. I purchased both M550 & JYX02 kit. I don't have experience on installing myself so I drive to nearby car audio technician to play safe. During installation I realize he skipped using the tap. The technician is using my android car player power where he connected the red to red, yellow to yellow and black to ground. Will this also consider hardwire and enable park mode?
In order to test if the installer did it correctly, use the AZDome app to view your videos. If the car is turned off and there is video recorded, then it is hardwired correctly.
I’m looking to buy this dash cam. Do you like it so far? And have you had any problems with it?
@@PatsGarageOnline hardwire is working thanks!
@@Kwyptx no problem whatsoever been using it til now.
Can somone go over the parking mode?
I have it wired correctly but I do not think it is working as intended.
I have it set to time-lapse while parked but it does not turn to video when acc is turned on like the Manuel says
Am I missing something? Mine did not come with that wire that you connect to the fuse box
Per 1:24 I had purchased 3 different things. The hardwire kit, the dashcam and the mount. All 3 of these don't come with a dashcam purchase.
I'll update the video description to include the link to the wire that connects to the fusebox. amzn.to/3ALvCSs
Thank you! I got this dashcam few months ago, but last week I bought the hardwire cable. Are you using any of the switch for prevent battery drain? When my car is off battery gives me 11.6v...
I'm not using a switch. I let the hardwire kit stop power to the dash cam when the DC voltage drops. My battery is typically weak if I let the car sit for a few days.
@@PatsGarageOnline yes, the hardwire has a module where you select the voltage where you wish the camera stops to receive power. The minimum value is 11.8v, when battery is below that, the cam stops recording. I'm afraid that if I don't set any drain protection my battery will be drained. Normally I use the car every two-three days.
The way you showed in the video to power the cam using the hardwire kit, you incorrectly installed one of the fused tap cables. One of those taps is bypassing the fuse, which of course is a fire hazard. Please correct your video to show which pronged connection is the source and which is the load sides. Thank you.
The camera screen turns off after a minute, what can I do to keep the camera screen on all the time when I drive ?
There is a screen timeout setting in the settings somewhere
where is the inside footage
Do you have issue setting up the app? I went through the process and arrived at the apps main screen and the dashcam was recognized. However, when I pressed the record option or the name of the device, I kept getting the message "..Please off the wifi DVR" or something and then then the wifi screen popped up. I check the screen and the dashcam was hooked up via wifi. Any clue? Thx
I'm sorry to hear you are having this issue. I have not experienced this and don't know how to troubleshoot it. I would recommend contacting the manufacturer.
Nice video! Do you know how to get the screen to completely to turn off while I drive? Whenever I turn the screen off when driving it keeps coming on like 20 seconds later
This can happen if you selected motion detection in the settings. Go to 18:20 in the video and watch to see where motion detection is unchecked and be sure that yours is also unchecked. You may also need to disable the impact detection to low or off at 19:20 in the video.
Hi Pat, i have a deposit down on a 2016 bmw i8 47,000 miles. Apparently when the dealer took Possession of them car, apparently they replaced the shifter assembly because they said that the car would not go into gear. They said that originally thought the car needed to be reprogrammed, which they had an independent shop do, but they said that the shop misdiagnosed it. Thus the replacement of the shifter assembly. Should I be concerned about this vehicle and would the shifter assembly affect the car not going into gear. Hopefully you see this post and be gracious enough to give me your advice and opinion. Regards. Benjamin
the camera stops recording 20 seconds every 5 minutes how can I fix the problem?
Message AZDome. It's possible that the SD Card became corrupted.
@@PatsGarageOnline I have bought all of them and samsung but it is still the same and I have seen that it is a software problem but nobody knows how to fix it , I spoke with support and they don't know how to fix it either
@@QBAN_BOY Since I've never encountered this problem, I sadly don't know what to suggest. AZDome support should be able to do whatever is possible to make it right.
@@QBAN_BOY I know this post is a couple of months old but I had this happen with another dashcam (not the Azdome) and it would reset all of the camera settings everytime the car started. It turned out to be that the firmware was out of date and had a glitch.
That company emailed me the updated firm ware files and I downloaded them to the SD card. Once inserted in the camera, the update happened automatically and never had that issue again.
It might be worth asking for the most up-to-date firmware if you haven't been able to fix this issue.
use the extra wiring kit and it’s killed my wife’s battery twice so I’m thinking of taking the power off for the parking mode
The app doesn't work
Great channel. 🚀!!! #1 view provider Promo-SM!!
I was g0ing to buy two of these then i realized over priced wanted 36$ more for install kit to hardsire for parking watch for all cameras beware very pricy for full install cancelled my order and no customer service typical china junk