1st/2nd Gen Dodge Truck Not Charging? Cheap ECU Fix
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Quick Tip: If your 1st or 2nd Gen Dodge truck won't charge, don't waste your money on a new ECU. Try installing an external voltage regulator! Watch more Quick Tips: • Quick Tips | DEBOSS GA...
Never forget another measurement. tapeboss.com
Support us on Patreon. / debossgarage
Get some merch. shop.spreadshi...
Follow Rich on Twitter. / debossgarage
Follow Rich on Instagram. / debossgarage
Follow Rich on Facebook. / debossgarage
Follow Rich on Car Throttle. www.carthrottl...
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
How To Install a Front Axle on a 4WD Case IH (Part 4)
• How To Install a Front...
DASH & TRIM: '48 Chevy Fleetmaster (Part 6)
• DASH & TRIM: '48 Chevy...
"Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.
95 12 valve, my first attempt at the external regulator had my system charging at 16v+..bought a 'variable voltage' regulator..now its all good, turned it down to 14.5+/-...great explanation Rich...thanks!
I trust everything thing guy says because he is just straight covered in it
💯
I love how every time I am looking for a video on fixing something on my cars I get a DEBOSS garage video!!
I did this to my '97, been working great for a year
I believe I'm having the same problem right now.
Where did you buy your at?
Bought a kit off ebay .... was well under a $100
the Quick Start Voltage Regulator Bypass kit , comes with online printed and phone tech help to solve your charging problem
Man I love watching your videos, your very knowledgeable and humble.
Hunter />>,$$>_/==/6
Rich?!? I can't find my glowplugs, and there's this hot thing under my intake air horn.... Lol 🤠
Great video 👌 keep up the great teachings!
Hey Rich..Have a blessed week..I knw you ment to say grid heater..The shop you work at the had a lot of Powerstrokes in there fleet & mental muscle memory is hard to break..Lol Thanks for the Info..Have a wonderfull Monday!
As well, when putting back in vehicle - The black box, connecting to alternator at those 2 pins ; The top one - bend outta the way, and tape up Good ! Only requires the bottom wire connection . Good luck, all !
De-Stroked would be wise to bring you in as a Tech Advisor prior to peddling hacked harnesses.
They would make a lot less money
I figured it out I wired in a relay to the regulator and made sure my field wire was ran to alternator power and it stopped charging hot 🔥
what? I have a 99 it charged hot when I did this, expand please.
It would be nice if he would show where he hooked up the wires.
My Dakota stopped charging, and I got a single wire alternator from the parts store for $50. The light on the dash stayed on, but it charged.
How do you trick the pcm so it wont throw a light and a code for the alternator?
You ever figure it out
Pretty simple ...pull the dash off...you will see some bulbs...remove those....problem solved
Hey just to let yall know I had a same problem checked the alternator wasn't charging so took it had it checked at the parts store working fine so it's the regulator right so I put the regulator on it still nothing there is a dang fuse in your fuse box it's a bridge from the alternator and the battery just check it first to save you some time
Like how you explained your video.. it was straight to the point, and you made it look so easy.. I've been researching videos on how to install this part, but how they explained was very complicated, but I got my ride running good. thanks to you man, and by the way for those of you who put a thumbs down on this video must be as F*#$.. lol because this was easy to do. Thanks again bro. 🤟
First and foremost ,check the ASD Relay, if good THEN likely need an external reg..
(Probably not a bad idea anyhoo)
I did this to my d150 and now I have pulsing on the gauge and lighting at idle. I used the power window circuit for my voltage since i have manual windows. Any help with the pulsing would be appreciated.
I have a 95 Dodge Ram 3500 12 valve and I'm having a no/jumping tack needle. What would cause that. I have a new crank speed sensor or ESS. Help please. It's driving me nutz.
this happened on my 04 ram so i did this! but my compressor is not working !?! need help
You should make a video how to make a 5.2 Standalone harness
does this also fix the fuel heater issues if you're also having that at the same time and no wait to start light
My electrical guy rebuilt my alternator with internal regulator, told me to tape up the field wires and should be fine. 5.2 efi, runs fine, charging voltage great, but will this drain my battery by not having the ignition switch involved?
My truck is setup exactly like this but the alt just will not charge. Replaced alternator, regulator, and alt fuse. I'm about to sell this truck.
I don't know if you will get back but I have a transpo regulator but which wire is the ignition? Color or on the harness is it the top or bottom one? Thanks....
3rd gen cummins 2003 “check gauges” not charging, tried crossover cable gonna test alternator next and batteries and also the clutch fan is drawing power from ECM/ECU as it has low voltage, any ideas about these 3rd gen wiring and charging problems etc, worth making a video on 3rd gen “check gauges” nothing too clear online about fixing or determining the issue between say crossover cable, alternator, clutch fan wiring, all the grounds and connections etc want to have optimal charging in a 03 3rd gen
So in saying that those two wires at around 215 or 210 can go either way he's stating that there is no polarity difference here someone help me out I'm having this problem and I don't know which wire to place into which terminal
Brilliant job Rich thanks!
Need help....I have a '97 3.9L and wont charge...PCM?
where did you get that for 50 bucks ??
So yesterday the ignition switch would key up the voltage gauge sent the message to the PCM to turn on the alternator and the gauge dropped to 8 volts. So my alternator is need of replacement? Thanks, Dave.
I have a 00 24 valve and I tried too run a voltage regulator and it charges too hot and cooks the battery if you could do a video on that one too it would be awesome!!
I figured it out I wired in a relay to the regulator and made sure my field wire was ran to alternator power
Please tell me more. I have the exact same issue and I am stumped.
@@travishundley5380 same here!? no one replies anymore
@@billybob261 I figured it out. It was a burnt fuse. That kept the original, as well as a scabed in voltage regulator from working.
@@billybob261 basically it was trying to compensate and overcharge
Question. I have a 1990 ford f150 xlt lariat. Bout a new battery and a 80 amp. Alternator. The wiring is differnt. Do i just splice the wires and hook it up ? The new alternator has the wires already connected inside. My old one had an adapter having to be plugged into the alternator. If that makes sense
I got this voltage regulator and my lights flicker, would this be the cause of the problem?
And how wiring 2000 need selenoide or external relay ?
50 bucks for the external VR????? Ripley2000 speaking here. They are like 20 bucks man lol. Nice instructable and excellent explanation of how to convert over that damn computer vr. The biggest moneymaker leave it to Chrysler lol.
What about 2008 6.7? Mine wont charge. Alt is good
I know this is late but I have a 93 w350 it’s over charging should I just run a regulator
What if. I change the pcm and same shit. No charching. New alternator new pmc and no charge
This worked good , too good . It's charging about 15.8 volts can you send me a switch diagram, this Cummins swap is so close. My kid turned 16 a week ago
Jason Lobland sounds like a ground issues check your ground to alt.
@@kkelectric2739 is there as well a "known issue" of the 2nd gen ram and park light/ running lights (but not headlights) of shorting ?
(Which is very strange in that seems to short if truck is parked leaning towards driver side, but hard , if not at all shorts fuse (I believe it's position #15 if I recall off top) if parked leaning toward passengers side/ traced every inch from tail lights up, seems to be H.L. switch, but don't want to throw parts. Thanks. And great assistance you gave . 👍✌️
What the hell did you say? You lost me somewhere at the first, here we go, LOL.
Thanks
have a 92 cummins that ive changed fusable links cps and all sorts of parts truck is practically new? still no overdrive and A/C etc? what next rich anything would help thank you!
Anyone know if this also works for 24v’s?
Yes. Works with most if not all Cummins Alternators.
Anything else I need to check?? I have done everything I can find on every video and every forum and asked several other people who have or work on Cummins and followed their advice and still can't get a charge
93 Cummins 2wd 5spd
Quick question for anyone that did this conversion. I tested the back of the alternator and got 33 volts out of it is this correct? What am I doing wrong?
Dodge Dakota sport V6 Magnum series 3.9
OK I tried this and it still dropping what should I check
Does this fix work on 2007 dodge charger?
Excellent as always !! Liked !!
Does this run true for a 2000 Durango as well?
Why’s the thumbnail a pic of a 3rd gen?
I had a 91.5 d250. Put the Cummins in my excursion. Used the dodge alt. I've replaced the external regulator and the pigtail. One lead to the vr is on a key on relay. The other goes to the field coil. The other wire for the field winding is straight to chassis ground. I get battery voltage to the regulator but it's barely charging if at all. With lights on at night I can go about 40 miles at 70 before the battery is almost dead. I jump the field winding straight to battery voltage and it will charge at 18 volts. Been through three brand new regulators. Any ideas?
Having similar trouble. This method overcharges my batterie
So I have. 92 Cummins and someone already did this but I don’t have a speedo anymore what can I do to bring that back?
Replace it
What glowplugs?
yes yes yes, grid heater, intake heater, pre heater... I work long hours...
It's my day off =)
My 2000 Dodge 2500 24V sometimes waits to long to start charging or once didn't charge at all. On that occasion, on the next start up it was fine. What's up? Thanks, Dave.
me too !
Love the tutorial thanks a lot! When I ran through the steps my volunteer is showing 15 volts at idle... Any tips? Ideas? Etc...
Mine is doing the same... 15+ volts
I tried the Tranpo internal kit and it worked for about a day. At this point I'm going to bite the bullet and buy a lifetime warranty 1-wire unit from PAPerformance and be done with this.
@Ky Massey Glad it worked for you. I never could get this method to work in my truck and bought a self-exciting unit from PAPerformance. So far, so good.
Hey rich I just put this in my dodge and I'm pulling 14.93v is it safe? Is it because it's cold out I'm in northern Ontario
That does seem high. What year and what engine? What happens when you turn your lights to put a draw on it?
DEBOSS GARAGE it stays at 14.93 with all the accessories on
It's a 1998 12 valve ram3500
I also had high voltage issues with installation
Question: Did this to my 2000 2500 Ram. Amp gauge indicates fine for about 30 seconds or so, then maxes out, check gauge light comes on. Battery voltage is still charging at 14.5 volts. any idea what would be causing this?
did u ever figure this out? having similar issues but haven’t pulled the plug on a external regulator yet, i have a lockup switch and i feel like that’s what toasted the pcm but let me know thanks
BE SURE all your ' ground ' connections, are Godly clean ; then, tighten up good. Very IMPORTANT, as ANY amount of resistance, will cause improper excite current ; for alternator to ' cut in '' cut out '' charging.... .. Yours is probably an A circuit arrangement ; there is a B type, too. Educate yourselves, folks, and save $$
So is the voltage regulator only in the computer? I was also told i need a very specific external voltage regulator for my 07 dodge dakota 3.7l which i can't find, would ypu know anything about that?
Wrong generation. 5 years later, hope you figured it out.
Saved by deboss again
My 06 Dodge diesel needs a new ECM where can I find one on line so I can buy it. Thanks
I found one on ebay, but you have to have the exact # series match, several hundred smackers
I had bought one of those dam thing an it still doesn't want to charge..
Thank you so much
can a dual battery be put in 92 dodge cummins ty
I dualled my 1991.5 by fabricating a two-battery steel base to bolt over and into the original single base.
First step -- fabricate a cardboard mock-up, trim to fit.
gLoW pLuGs lol, great video thanks
What about an OBD II computer
This setup should eliminate any computer controlled charging system.
your key looks kinda funny
Have you heard of the nippondenso voltage regulator? It bolts directly onto the backside of alternator without any rewiring. www.motorcityreman.com/chcovore1.html?cmp=googleproducts&kw=chcovore1&gclid=EAIaIQobChMI_8i0wq762gIVAjBpCh0L1g9-EAQYAiABEgKp-PD_BwE ... Got a little confused on which stud the positive B+ wire connects to. Right now it sits at 12.5 volts at idle and think my wiring is wrong. Regulator is preset at 14.2v and I have a 97 12v in a 85 suburban. Any suggestions?
itd be nice if this video wouldve been specified as a diesel fix not gas
Will this work on a 97 ram 1500 same steps?
Alex Pozos My dad sent his ecm from his 1997 Cummins to some company he found on eBay and they fixed it for like $50 or so
Smooth Trooper think you can send me the link or company name?
Glowplugs?.
Jose Munoztorres Right?!
we use to track down a lot of those ecus!
I have 4 in the shop. Leave room in your trunk next time you stop by!
Cummins don't use glow plug s
In theory...
*volt meter
Cummins don't have glow plugs.
Thanks for the terrible drawing and explanation. Why couldn’t you just make a video of you actually connecting everything for us to see.
What if. I change the pcm and same shit. No charching. New alternator new pmc and no charge
What if. I change the pcm and same shit. No charching. New alternator new pmc and no charge