Dear friend can you confirm that the battery with Bluetooth logo on the back have not this type of issues, thank you so much, have you ever had cell balance problem? Thank again
Is that stabilizer also broken or is it just the BT module and the resistor (note to myself, also have a 8Ah Parkside battery, and still need to hear back from them after emailed them that my charger broke down after 4 times max use)
@@pawelw.9172 Been working with and designing electronics since the 80's, what world have we come to that we now need to repair this mess. Clearly design and quality issues. From my 3 Parkside orders, 1st saw failed after 1 go. Now my charger which was used 4 times is dead. Meanwhile the stuff that I build in the 90's is still running without issues.
Have done the repair and at first it worked but after a few usages battery indicator lights only red even though it is at ~19V and it's not possible to charge/use anymore. Looked at the PCB and found no obvious issues. Resistor and voltage regulator are still working correctly. Have you experienced this? Any possible solution?
Have done the repair and at first it worked but after a few usages battery indicator lights only red even though it is at ~19V and it's not possible to charge/use anymore. Looked at the PCB and found no obvious issues. Resistor and voltage regulator are still working correctly. Have you experienced this? Any possible solution?
Great Job ❤
Thank you my Friend🙏🙂🤝🤝🤝
Has the subscriber repair request series started? Awesome! 🎉
😁🙂❤️
Is it possible to fix when green and red led is always on?
Do you know by any chance if the Bluetooth module has been updated for this battery ? i see this are from 03/2022
very very good dear friend!!!! thanks a lot !!!!!!!!!!!!!!!!!!!!
Is it possible to snap the right pin from the Bluetooth chip to act preventively and if yes, which one of the pins without hot air station ?
From the bottom right side the first pin is 3.3V. Cut it off. But first remove R44, change the 3.3V regulator and put a new resistor around 20 ohms
@@ErCanEverything какой номер контакта блютуз ?
I need mine repaired how much do you charge
Good job ! 🙂 A bluetooth module in a battery! ..... Why not a hot drinks dispenser while we're at it!
Dear friend can you confirm that the battery with Bluetooth logo on the back have not this type of issues, thank you so much, have you ever had cell balance problem? Thank again
i have two 8ah parkside battery locked with unknown pin how to unlock them ? any idea ?
can you link the resistor
Great work! Is the 20 Ohm resistor a 0805 SMD package size?
great question
Tutorial bagus sahabatku ❤❤❤❤❤
Resistors link please
I didn't understand why you removed the bluetooth modules
Because the bt module has a short.. that’s why
Check description for detailed videos🙂
I have done the exact same thing to my own batteries. Now I'm trying to see what's wrong with the module..
ok thanks for the answer@@apostolistimoleon1358
2:02 weeeeeee
😁😂🤝🤝🤝
Is that stabilizer also broken or is it just the BT module and the resistor (note to myself, also have a 8Ah Parkside battery, and still need to hear back from them after emailed them that my charger broke down after 4 times max use)
the stabiliser is at fault, the same bL module is used in other equipment and works ok....
@@pawelw.9172 Good to know. Well, will be ordering spare parts any way. Think I have them actually from ESP32 projects.
@@Luke-san watch "elektrośmieciarka", you will also see a transil diode soldered in to protect the mcu.
@@Luke-san wathc "elektrośmieciarka" the guy uses transil diodes to protect the "mcu".
@@pawelw.9172 Been working with and designing electronics since the 80's, what world have we come to that we now need to repair this mess. Clearly design and quality issues. From my 3 Parkside orders, 1st saw failed after 1 go. Now my charger which was used 4 times is dead. Meanwhile the stuff that I build in the 90's is still running without issues.
How to repair blood pressure meter.❤❤❤
🤔
Anyone know what is the HP 201202 real name?
its preprogrammed microprocessor - so, a new one without the batch program, it's useless.
@@darek098 dude its bad. Waste of electronic cuz 1 little part demaged destroy to trash good aku
@@darek098 can you give the ref of this microcontroller ?
Can I use a voltage regulator ams1117
no
Hi, i have to the same batteries with the same issue, would you be willing to repair them?
Are you from romania or from germany?
Why does it have a BT chip anyway🤔
I like the BT function but the first batch of modules have a problem unfortunately.
@@ErCanEverything but what IS the function ? All a bit new to this 🌝
Have done the repair and at first it worked but after a few usages battery indicator lights only red even though it is at ~19V and it's not possible to charge/use anymore.
Looked at the PCB and found no obvious issues. Resistor and voltage regulator are still working correctly.
Have you experienced this? Any possible solution?
Could be bad cell balancing.
2:02 😅😂🤣
😂😂😂
my friend how about ryobi bms repair
I have not opened a Ryobi battery yet🤔
@@ErCanEverything I have not opened a parkside battery yet
another fix
💯💯💯💯💯💯💯💯💯💯💯💯
😮😮😮😮😮
Problem solved: eliminate the "smart" part of the battery.
😢
Have done the repair and at first it worked but after a few usages battery indicator lights only red even though it is at ~19V and it's not possible to charge/use anymore.
Looked at the PCB and found no obvious issues. Resistor and voltage regulator are still working correctly.
Have you experienced this? Any possible solution?