How to install PIAA Superior Bass Horn | 2020 Toyota Corolla Hatchback
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Horn Upgrade List📝
✅PIAA Superior Bass Horn - amzn.to/3fjjoVv
✅Car Horn Wiring Harness Adapter - amzn.to/3oimLQD
✅Liquid Electrical Tape - amzn.to/3fjFbME
⬇️ Subscribe for more videos here!⬇️
/ @mattwalters
2020 Toyota Corolla Car Review👉🏼 • The Most Underrated Ha...
⬇️ Checkout my social where I post sometimes ⬇️
Instagram: matt_walters77
📷Gear Used
Sony A7C - amzn.to/37dnYli
Sony FE 22-105 F4 G OSS Lens - amzn.to/2WbSjdB
Rode VideoMicro Compact microphone - amzn.to/2Wcdn3I
Peak Design Camera Wrist Strap - amzn.to/37feSo4
Amazon Basics Tripod - amzn.to/3bv2nGK
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
Thank you for this!! I used my horn for the first time when someone almost side swiped me and I was surprised and shame at how weak the weak the stock horn is🤧
People definitely notice me on the road now, when I have to use the horns in similar situations
The stock one is like a go-kart horn. It's pretty embarrassing.
Just purchased a 2022 Corolla SE a few days ago and agree that the horn is pretty whimpy. You did a great job in the making of that video. Just purchased the horns and the wiring adapter. Can’t wait to tackle the job. In the meantime, I’ll just stick my head out the window and holler.
Finished the project yesterday in about 20-30 minutes. Very impressed with the outcome.
Excellent video overall. Just want to provide an alternate grounding method. The ground terminals can be secured using the same bolts that are used to mount the horn brackets. That’s actually how the OEM horn is grounded. I installed Fiamm low and high tone horns like that. And thanks for the link for the connector kit, that was super useful !
Very good and comprehensive video. I placed an order for a Corolla hatch last week and will definitely be doing this.
Another plug-in upgrade(though would require some wiring work to single horn vehicles) is to go with horns from a more upscale Toyota vehicle; most Lexus models are pretty good if you can find them in boneyards. Toyotas have used the same horn connector since the mid '80s, so you've got a lot of options to choose from. I did this on my '88 Celica; replaced the relatively wimpy horns with those from an LS400. It saved me getting hit a couple of times by inattentive drivers.
Thanks for the video. I have a 2021 Corolla ZR hybrid. Your clear and easy instructions made it a breeze for me to install these horns using the Toyota adapter. I placed one horn in the original horn position and the other to the same spot on the opposite side of the grill so the sound may balance better- maybe it won’t make a difference at all. I did have to solder one of the little wires to a longer wire to reach. Now my little red car has a big loud voice. Watch out motorists!
I have a 2020 Hatchback as well and even I can't hear my own horns when music is turned up! LOL Just ordered these horns and will be doing the upgrade soon. Thx for the vid!
Finally someone makes a decent review on how to change these clown horns. Thanks man! Changing mine on my XSE!
Very helpful video. Many thanks. The positive wire (red) is nicely done. For the ground wire, simply run a short length of black wire from one of the horn terminals to the mounting bracket. There is no need for a separate ground wire running to the car body someplace. These are the instructions on my Fiamm horns.
Thank you for the video and providing the bolt size and what else may be needed. I the Piaa 400hz + 500hz horns on the way and they both have the factory Toyota connections, so I just bought a pigtail 1 = 2 adapter so no additional grounding needed. Happy I won't have to run back to the store to figure out the bolt size! 👍
I installed these horns in my 22 Corolla today. Such a big difference. I love my Corolla, but it’s pathetic what Toyota calls a horn. I was almost embarrassed to honk it in traffic. LOL
Does it sound a lot better/louder in person? I do agree the 22 corolla horns are weak
Nice vid man! Definitely need to upgrade my horn badly lol
Definitely gonna change my horn. I have a Corolla too, the horn sounds terrible…thanks for the instructions. What I’ll do different is remove the front bumper and align the horns so they are visible through the grille.
What a great video! Thank you so much! I followed this step by step and now have a much more respectable sounding horn :-) it was a bit fiddly fitting the horn on the right but got there in the end! The Toyota harness was difficult to source in the UK so got it from China which took an age to come. It came in a pack of two so if any one in the UK wants the other one contact me. It’s just the harness not the red wires but happy to pass it on. So glad I made the change. Thank you again :-)
Thank you so much for making this video.. I couldn't locate the horne on mine but after watching your video, I now know where it is... will do this tomorrow to my 2021 Corolla Hatch... the current horne is embarrassing...sounds like mouse..🤦♂️
Had this car for a few months now and never actually used the horn. Used it for the first time and I was shocked. What was Toyota thinking 😭
That’s what I was thinking! It couldn’t possibly cost much more to give it a respectable sounding horn! If you really want to be disappointed, look up the Toyota Supra’s horn lol
Thanks dude, did exactly this on a 2023 Corolla SE Hatch (C build-Japan). Same parts. Perfect results. Way better than the factory or Hella's. The grounding wires here are superior than brands built into the brackets. Recommend.
Portland is disgusting
I never thought of upgrading my horn but after hearing the before/after, defn going for it! Thanks man
Thats a great tutorial, thank you. Especially like the link to what's needed. I going to try!! My highlanders horn just doesn't cut it
Sounds much better in real, awesome, I like it, and it's easy install if your car came with 2 horns like my camry 2014
Thank you! I appreciate the hard work that went into making this video!
My boss even called me out at work saying it sounded like sh** lol i wish to change mine so bad 🤣
Dad did the horn on Camry, too 😂
Upgraded my Toyota Blade Master G thanks to this review! Cheers mate!!
Awesome video! Learned a lot and used it as a guide. I'll buy a PIAA Superior Bass Horn for my Toyota Vios.
Thanks great video I just received my new 22 hatch corolla manual and I just order the horns
Recommendation if you have the 2.0 engine I just ordered the Lexus engine cover for the U.N. model that has the same engine as the corolla. Make the interior engine look nice and as I have the se model I ordered the hood insulation that the XSE has for my se
This helps contain any engine noise along with the engine cover.. pure cosmetic and sound deadening but I like the ROI
Thanks for the tip on the adapter. I hate cutting off connectors and the adapter kit is really reasonable.
Just finished installing my new horn with your video. Thanks!! Howd your dad like his new horn? 😂😂
He wasn’t a fan😂
I have a 2022 Corolla cross. Thanks for the heads up. Maybe you can do a vid on turning off the insane seatbelt buzzer.
Great video overall. Great job with the editing and staying natural and professional with your narration. I appreciate @j penske with the comment for an alternative grounding method.
Ordered the set... And will be installing as soon a I get them....
Great video! Going to do this to my corolla hatch, thanks for the info!
Excellent video friend, very well explained step by step. I will perform the replacement of the Horns
Toyota really knows how to cut some costs with their cars. Lexus all comes with loud powerful horns, but most of the Toyota has that tiny weak horn from the factory
Nice. I got some of the clips or fasteners damaged. How do you call these type of fasteners to look for them to buy. Thanks.
I picked up my 2023 Corolla Hatchback 2 weeks ago and I almost cried after hearing that weak sounding horn. I knew their and there that I had to change it, thanks for the video. Just checking, does this upgrade not void the warranty?
As far as I know, this simple modification shouldn't void your warranty. I did this soon after buying my car and it's never caused any problems at the dealer.
What about the second horn?
I did PIAA Dual Horn setup on my homies Corolla Hatchback too...I stuck the other horn on the Passenger Side though so everything is "symmetrical" not all on one side like how you did yours!...Just wanted see how you did it...Haha...Not bad!!
I only put them both on one side because I didn’t bother to see if there were any mounting points on the passenger side 😅 only noticed after reading this comment!
if you put it the other on passenger side, is it ok to extend the red wire so it will reach it? will it affect if the other wire is longer than the other one? thank you * i will wait for response before buying
@@BinongCAare you still waiting for response before buying? Lol
@chadhalverson151 oh I already bought something before hehe. Thanks
I bought a toyota horn for land cruiser or somethibg like that. Plug n play
Great video! Definitely worth it.👍👍
If i just installed one of the horns could i just plug and play without any wiring at all?
is it possible to use just one of the PIAA horns (330 or 400 dcb) ? thus eliminating having to piggyback both ? This modification caught my attention but i've never tackled a wiring project like this so I figured an even swap 1 horn for 1 horn would be good. would having only one decibel tone (330 or 400) be no improvement over the really weak Toyota stock horn tone ? Thanks for any advice
You could, but it wouldn’t sound right. The dual horn system is compromised of 2 different tones, one high and one low to combine to the noise you hear in the video. So you could use just one, but it would be either a high or low tone and not as loud.
You want the low tone, if using only one. If I do the work, I am making a statement with the horn. I guess it all comes down to how much attention do you want. My motorcycle has loud ones.
Check out the new Wolo Bad Boy, a single horn, dual tone, and not relay necessary.
I'm gonna have to upgrade the horn on my GR Corolla...
i am trying to add the PIAA horn to my Camry 2020 XSE. there are no videos on youtube. can u share the video on how to change camry horn ?
Did this as soon as i got mines!
for the LOUDEST horn do i separate the horn's location or keep them close together?
Just got a 2020 Corolla and I am embarrassed when I touch the horn.
Can you just do one horn installed or it has to be a pair?
13:46 the point
Ordering this ASAP thanks for the video
Great video! Just curious, are these horns reasonably louder than the stock horns? Or is it mainly just a difference in tone?
I have a 2010 toyota corolla and planning to install these. My question is do i need a fuse reaymto install this or just use the wiring adapter like what you did in the video?
thanks for the video. viewer from canada. just wondering, does a relay is needed while connecting 2 horns? im having a 20 corolla and the horn sound very bad.
thank you
This is the one thing I need to do on mine. Factory horn is just terrible.
Nice! Now it sounds like a big truck👍
I have a toyota corolla 2010 with weark horn also. I have a question do toyotas use the horns for the car alarm sound also? meaning if someone steals your car they will hear the cheap horn but if you upgrade the horns its suddenly loud?
Nice video. I just bought 2018 Corolla. The horn fuse is 10A. Will I need to add a separate higher rated fuse?
I just answered my own question. Amazing that these horns are only 2.7 amps each. Thanks again for the great video!
@@gonzo11213 thanks! I’ve had these in for a few months and haven’t ran into any issues so you should be good!
I bought a train horn for my 2020 Toyota Corolla, should I've of gotten 2?
Good video,
Thanks Matt
Is this exact method work for a 2022 corolla le?I hate dat meep meep go kart horn🤬
Great video bro.
How do you re-install those plastic tabs?
Next video: How to install Train Horn on a Toyota Corolla.
Really thought about putting that in instead of this one 😅😅 decided against it though, probably for the best haha
Can you put the link to where you get the liquid electrical tape?
www.amazon.com/Star-brite-Liquid-Electrical-Tape/dp/B0000AXNOD/ref=sr_1_4?keywords=liquid%2Belectrical%2Btape&qid=1677684296&sprefix=liquid%2Belectrical%2B%2Caps%2C282&sr=8-4&th=1
Bro man I how do u get the grown wire from and the pice u put on amezon its not the same thing 2 plug in the car can u send me a link or different link
Nice video Matt - not only can I visually see what ass hole is driving on route 7, now I can hear them
Great job well explained ! 7
Sor we domt need any fuse/relay for this horn install/
Anyone have a link where to order just the ground wires?
My question is would the Camry horn then work as a replacement for the Corolla horn?
They both use the same connection leads. So yes, It would!
Well done 👏
Can I do just one ? just replace the OEM one
Yes but for the one in the video, you need both to have the right sound. If you replace just 1 horn, you don't need an adapter
Installed mine and am not getting any sound. I can try better attaching the ground wire, but other than that I'm not seeing any glaring mistakes :/
Did you insert the red wire into the black adapter properly? You could also try doing one horn at a time without the harness to see if both horns work. If neither work on its own, but your OEM horn works, then you likely got a defective horn
@@DogsSnipes I reseated the red wire and trimmed it back a bit because they stripped like an entire inch. I also made sure the ground wires were properly attached and that did it :) so yay for big-boy horn, lol
Thanks
Hi, do I need a relay on this set up with a single horn? Thanks
They relay is needed if you're changing from a 1 horn setup to a 2 horn setup, which is the case in this video. However, if you're getting just 1 horn, then you don't need the harness, you'
d just be swapping the horn out
Hey, do you have any recommendation for install this on a hybrid? That slot is taken up by the pedestrian warning speaker
I've never seen under the hood of the hybrid model, so unfortunately I can't help you there 😅 I guess you'd just have to get creative with where you mount it and possibly fabricate something. Good luck!
@@MattWalters I managed to make it work. There's an identical slot on the other side of the car, so I ran 16 guage wire from that side of the car to to the harness. Works perfectly. Thanks for the video
@@DogsSnipescan also just remove that pedestrian speaker and plug in a resister to trick the car into thinking it’s still there. Then use that spot for the horn. Or simply drill a small hole to screw into, not that crazy.
Do I need to disconnect my battery? Thanks
Not necessary
Just Installed Piaa sports horn and the fuse blew ? Do I need a relay?
Hmm not that I’m aware of. I haven’t had that issue since installing it
How does it sound…. Missed the most critical part
Way better than it did before!
Will this work on a 2017 corolla? the harness i mean? anybody knows?
❤
How power draining is this?
I haven’t noticed a difference in any kind of power drain or dead battery since upgrading the horn so I think it’s safe to say it isn’t any more draining than the stock one.
Just install Pia sports horn and the fuse blew help!!!!?
Do you really need to change a horn on your car because of how you feel about your manliness?😂
Lol it's not a about manliness just sounds like a cartoon 😂
That is 100% not how those connectors work when attaching the positive leads to the positive lead on the OEM harness
how does it connect? useless comment if you don't explain how it connects man.
@@jacintoalfaro7157 Spade Connector
But it worked and its sealed in a space where it is going to feel almost 0 stress. Spades are how that would work but this method will work fine in this application.
@@aquamarine456 This isn't a method, it's just wrong. Show me this method in the ASE electrical guidlines or consult anyone with automotive wiring knowledge and they will tell you that ain't how it's done chief.
I'm not downing anyone and if someonne can't constructively take some criticism that's not my problem. I'd hope that someone would call me out had I been in his position so I can use proper methods moving forward.
Hell yeah. Lol
Highly necessary. I've always hated how wimpy this horn is.
THAT'S HOW YOU REMOVE THOSE PLASTIC PINS? I've broken so many 😭
Je trouve pas le câble queue de cochon
Why 2 horns?