And that ladies and gentlemen. Is exactly how you impression a key! I am a CRL with ALOA 29 yrs experience Started out making keys to cars in the mid 90’s at car auction. That was 7 yrs of 70 cars a day 5 days a week. Impressioning is a way of life. Lol. I still impression everyday. A key make to whatever someone brings into the shop. I can impression a key to an Master padlock M1 key in under 2 minutes in most cases. Never over 4 minutes You did good job sir. Easy money.
@@Slideyvr you can remove the door lock and take it to a locksmith. There is a code on the lock and the locksmith will be able to code cut a key for you.
Another thing you can do to make the marks more visible is to blacking the edge with a Sharpie pen and the pins will scratch through the thin ink. I did this for my old Accord with an aluminum key made entirely from scratch.
Experience and education are expensive and time consuming. We pay for that knowledge or we can TH-cam it and try to do it ourselves. Lol. TH-cam is my education.
i must be missing something, what kind of pin or wafer will BITE into the metal of the key ? the key is made from putty or something ? Can't I use uncut blanks I have ? asking as automotive locksmith
Its actually crazy how easy this stuff actually is to do. Burglars have it easy these days. They could sneak up on your house at 2 am for example and use similar techniques to fashion a working key then they can easily slip into your house in no time right after you leave for work in the morning and they can lock it right back up on their way out so it takes you a minute to even realise you have been robbed
Everyone should have high security locks and infrared security cameras with pan and motion tracking, that alert if GSM or wifi is blocked, like my house.
No you cannot impression side bar locks. Although I did impression a ford sidebar ignition when they first came out. I may have just got lucky, but Ford sidebar is different than gm style little wafers. I will consider doing a gm sidebar ignition lock removal video.
The wafer pins are on both sides in a 2005 Ford H75 key blank. It is possible if you solder the lead on both sides of the key blank. Difficult but not impossible. Better way would be to pick the ignition over to accessory and remove it, then take apart and make a key by code machine. Or you could put the key in a vice and hand file it. That would be a good video I will do one next time.
How does one get into this business? I been in the automotive business for 20 years looking to get out of it always was interested in making keys and programming them
It's a special soft key. I think is an aluminium key. Thats why he doesnt use a magnifier glass. Those marks in the key are simply visible, and you only have to rush them till they dissapear every time You rush...
This is a lost art with the modern locksmith. Tools used today take the Smith out of locksmith. With the exception of much older cars, this would be the preferred method for something earlier than 1980s vehicles. Your truck should be super easy.
The soft lead that comes off the key CANT BE VERY GOOD TO BRING CLOSE TO YOUR FACE when trying to see/shave the mask. Since you already got the bench for the vice, MAYBE bench light with a large glass that can slightly magnify it can keep help keep all the shavings on the bench and away from your face..
Hey. Don't know if you answer questions but I'll try? My fob has disintergrated with age. Still works perfectly except if you try & use it in the car, it falls apart again. So we got a key cut, stretchy chain & put the fob up, like when you start the car. And that works. But I just want a new fob with key without cost Aus $160 plus. Can it be fixed some way?
@@abclocksmithsecurity69 damn rekcehclleps that was Stengel when I typed it but it changed after I verified it I saw a key cut the way you showed I had put a new ignition in my Thatsoon 240Z and got tired of unlocking thru rear hatch or passenger door I went to a locksmith in San Diego one of the guys was in a wheelchair I pointed out my car thru the door jumped the curb and had my key about half cut by the time I got back to my car so I filed (pun intended) away what he did and saw your video realizing it was what I remember so I bought 2 blanks and 2 keyfobs off eBay for my 2005 Chevrolet Silverado
What about two-sided car keys? I have a 2007 Toyota Camry that needs a key and they want too much to make one.😭 I bought the files and stuff and I'm ready to do it.🤨
I will do a video on how to impression a key when there are wafer pins on both sides. But for now you can take out your drivers door lock. There is a key code stamped on it. Remove the rubber plug and unscrew the torx nut on the door jam perpendicular to the key lock. And remove the lock. If you text me the key code I will send you a key for $30.
Why did the video cut out right before he got the lock to turn? As if something funny happened in order for that key to work.. itd be much more believable if the video went straight thru without any edits.. As they say, "the magic of TV" Its too bad would have been a good video otherwise, but too much of a coincidence that the video cut out, right afterwards, "oh look the key worked, the lock turned, we did it, we're done." Were not blind or born yesterday...
It was very noisy when the snowblower went by, so I edited the video. But because this is my most watched video, and the weather is nice this week, I am going to make another one. What type of pin tumbler lock do you want me to make it key for?
I'm no doctor, BUUT MIGHT BE SMART TO WEAR A DUST MASK or something to avoid breathing in the lead dust shavings if you work with soft lead regularly..
Dude you're an idiot not just any idiot You're the biggest idiot I've met so far why would that make any sense to wear dusk mask when he's outside on the open That's a metal it's going to fall and if the wind did blow it probably blow into his clothes before it hit the ground come on McFly think the fact that people like you are going to be left in this world wants my generation's gone I feel sorry for my grandkids
And that ladies and gentlemen. Is exactly how you impression a key! I am a CRL with ALOA 29 yrs experience Started out making keys to cars in the mid 90’s at car auction. That was 7 yrs of 70 cars a day 5 days a week. Impressioning is a way of life. Lol. I still impression everyday. A key make to whatever someone brings into the shop. I can impression a key to an Master padlock M1 key in under 2 minutes in most cases. Never over 4 minutes You did good job sir. Easy money.
Hello I have a question do you know what to do If lost a key to a 1991 240sx
@@Slideyvr you can remove the door lock and take it to a locksmith. There is a code on the lock and the locksmith will be able to code cut a key for you.
Another thing you can do to make the marks more visible is to blacking the edge with a Sharpie pen and the pins will scratch through the thin ink. I did this for my old Accord with an aluminum key made entirely from scratch.
this helps, thanks! I was wondering how the marks will be visible after all the wafers or pins dont put pressure or bite the key.
Wow that is cool I never knew how you guys did that ? I am buying a 2010 Suburban with no keys and there is no longer a lock smith here thank you !
THANK YOU!!! Most inpressioning video I'v watched in the past. Did not help me? Yours was a big help to me!!!!! THANKS!!!
Dang I paid 300 for a lock smith to do this one time took him less then 30 minutes to do this. I wondered about this. Thx
I just had q $275 quote
Sometimes it's the knowledge we pay for
Experience and education are expensive and time consuming. We pay for that knowledge or we can TH-cam it and try to do it ourselves. Lol. TH-cam is my education.
Ppp
Lost my key to my Mitsubishi, thanks! And love the snow blowing not stopping you!
Did you make y your own? IF so did it work
i must be missing something, what kind of pin or wafer will BITE into the metal of the key ? the key is made from putty or something ? Can't I use uncut blanks I have ? asking as automotive locksmith
😮 WOW! Now thats impressive!
Great skills man.
Thank you
So do you use the soft key to make a copy with a key machine
Yes
What the keys called you make the impression on ?
a soft key. i believe it is the standard key just filed thin on the edge to make it thin and weak, making it "soft"
That doesnt damage the pins? Arent they usually a softer metal
So you only need one side to match?
Great video.
Its actually crazy how easy this stuff actually is to do. Burglars have it easy these days. They could sneak up on your house at 2 am for example and use similar techniques to fashion a working key then they can easily slip into your house in no time right after you leave for work in the morning and they can lock it right back up on their way out so it takes you a minute to even realise you have been robbed
Everyone should have high security locks and infrared security cameras with pan and motion tracking, that alert if GSM or wifi is blocked, like my house.
Good job sir, God blessed 😮
Where do you get a soft key?
You can use used wheel balancing weights. Any auto garage will give you old used wheel balancing weight for free
@@scottfree8726, so, lead.
where do I get a soft key?
Can you do this with a GM side bar lock?
No you cannot impression side bar locks. Although I did impression a ford sidebar ignition when they first came out. I may have just got lucky, but Ford sidebar is different than gm style little wafers.
I will consider doing a gm sidebar ignition lock removal video.
Does this method work with newer fords 2005?
The wafer pins are on both sides in a 2005 Ford H75 key blank. It is possible if you solder the lead on both sides of the key blank. Difficult but not impossible. Better way would be to pick the ignition over to accessory and remove it, then take apart and make a key by code machine. Or you could put the key in a vice and hand file it. That would be a good video I will do one next time.
When you say soft key is that some kind of lead key that you can buy? I’ve actually look for aluminum keys that may be easier to file
Watch this video, I show how to make a soft lead key for impression. th-cam.com/video/MY_oFNlvclY/w-d-xo.html
Would heating the key up with a blowtorch be more efficient? Soften the metal to make more distinctive imprints?
Have you tried? Any update?
No because it will weaken the whole key
What’s the key picker called, I’ve looked on eBay but I can’t find them.
The file is called a pippen file. The key clamp I made by cutting a vice-grip clamp and welding it to a piece of steel.
But, does one actually need a key to turn those Ford locks ??
-Bad jokes aside, this was a very informative video. Thank you.
Shane Warne apperently not got a Ford that turns without the key in it at all
Hi sir, may I ask where you locate? I have a 92 Accord and the only one key just lost. Do you think you can make a key for it?
I am in Sothern Ontario Canada
Wil this method work for any car key lock ???? And can I use this method while the lock is attached to the door
How does one get into this business? I been in the automotive business for 20 years looking to get out of it always was interested in making keys and programming them
Where do you live?
Dayton ohio@@scottfree8726
can I use any key to do that or the key is a special one?
It's a special soft key. I think is an aluminium key. Thats why he doesnt use a magnifier glass. Those marks in the key are simply visible, and you only have to rush them till they dissapear every time You rush...
I have checked with all the locksmiths in my area and they tell me you can’t do this for my Chevy pickup. I don’t know what to think.
Correct. All GM vehicles have a sidebar ignition. Maybe I will do a video
This is a lost art with the modern locksmith. Tools used today take the Smith out of locksmith. With the exception of much older cars, this would be the preferred method for something earlier than 1980s vehicles. Your truck should be super easy.
@@scottfree8726×
So you file in between the marks? But how do you know when to stop
File the pin marks.
I think you stop filing when you stop getting "impression" marks! But whata I know I'm here trying to figure ir out too
@@MrMackAtack yes file the marks and stop when there are no marks.
He was clear about it said and did it several times lol
The soft lead that comes off the key CANT BE VERY GOOD TO BRING CLOSE TO YOUR FACE when trying to see/shave the mask.
Since you already got the bench for the vice, MAYBE bench light with a large glass that can slightly magnify it can keep help keep all the shavings on the bench and away from your face..
Hey. Don't know if you answer questions but I'll try?
My fob has disintergrated with age. Still works perfectly except if you try & use it in the car, it falls apart again.
So we got a key cut, stretchy chain & put the fob up, like when you start the car. And that works.
But I just want a new fob with key without cost Aus $160 plus.
Can it be fixed some way?
Buy a new shell with button pad, and battery. Clean buttons on circuit board with wd40
Can you use a Drexel tool to do this?
Probably, try it and let us know
@@abclocksmithsecurity69 damn rekcehclleps that was Stengel when I typed it but it changed after I verified it
I saw a key cut the way you showed I had put a new ignition in my Thatsoon 240Z and got tired of unlocking thru rear hatch or passenger door I went to a locksmith in San Diego one of the guys was in a wheelchair I pointed out my car thru the door jumped the curb and had my key about half cut by the time I got back to my car so I filed (pun intended) away what he did and saw your video realizing it was what I remember so I bought 2 blanks and 2 keyfobs off eBay for my 2005 Chevrolet Silverado
What about two-sided car keys? I have a 2007 Toyota Camry that needs a key and they want too much to make one.😭
I bought the files and stuff and I'm ready to do it.🤨
I will do a video on how to impression a key when there are wafer pins on both sides. But for now you can take out your drivers door lock. There is a key code stamped on it. Remove the rubber plug and unscrew the torx nut on the door jam perpendicular to the key lock. And remove the lock. If you text me the key code I will send you a key for $30.
😅❤❤❤ you're so smart you are awesome thank you
Can you come to Washingtonstate and do my cj7 jeep top and doors please? 😏
Thank you friend,well explained.
Your welcome
If this works, I am going to love you forever! I am going to get a key today and go home and try this!
What kind of card do you have, year make and model?
you are good!
Thank you
Is this a Ford switch key?
Yes
Absolutely beautiful
Nice video but if the locks out I’m not going to impression a key
Depends on the type of lock?
Make sure you watch this video, I show how to make a soft lead key for impression. th-cam.com/video/MY_oFNlvclY/w-d-xo.html
To cheat a little if I had to impression a car key. I’d probably cut them all down to a 1 cut on my code machine. And start from there
That’s a good way to do it, or you can make one key by code and use it to duplicate more.
So I'm the only one that notice that this guy sounds like bubbles right 👍
Both sides of blank key?
It is possible but difficult to solder both sides of the key blade
Why did the video cut out right before he got the lock to turn? As if something funny happened in order for that key to work.. itd be much more believable if the video went straight thru without any edits.. As they say, "the magic of TV"
Its too bad would have been a good video otherwise, but too much of a coincidence that the video cut out, right afterwards, "oh look the key worked, the lock turned, we did it, we're done."
Were not blind or born yesterday...
It was very noisy when the snowblower went by, so I edited the video. But because this is my most watched video, and the weather is nice this week, I am going to make another one. What type of pin tumbler lock do you want me to make it key for?
When you impressing a key, only go one way with the file. Never both ways, remember that.
CIL?
With Any File And What Ever You File Only One Way Same With A Hack Saw FORWARD
I'm no doctor, BUUT MIGHT BE SMART TO WEAR A DUST MASK or something to avoid breathing in the lead dust shavings if you work with soft lead regularly..
Dude you're an idiot not just any idiot You're the biggest idiot I've met so far why would that make any sense to wear dusk mask when he's outside on the open That's a metal it's going to fall and if the wind did blow it probably blow into his clothes before it hit the ground come on McFly think the fact that people like you are going to be left in this world wants my generation's gone I feel sorry for my grandkids
Don’t do this they patched it
wtf
@@gman0724They did
Xx do