How to build a Bench Planter | Make Money Woodworking | How To
ฝัง
- เผยแพร่เมื่อ 1 มี.ค. 2024
- Support my channel with a like or share! :) you rock!
freeimage.host/i/JGHC1LB
#CedarPicket
#makemoneywoodworking
#projectsthatsell
#woodworking
well now this is to adorable.
six pickets total costing not a lot to build and selling for $80 each. just like pancakes and kids the first one is always a throwaway. this is going to be a rather quick build because I have orders to fill but ive got faith in you!
you simply cut the pieces out using the provided cut diagrams, rip that little sliver down on the table saw, apparently I had set mine to one and a half inches instead of one and three quarters. set your saw over to 45° and recut any dog ears that you may have overlooked.
to start I'm taking both of the 12 and one quarter inch pieces and all four of those 30-in pieces and that is going to be the box construction for our bench. so take both of your 30-in pieces I line them up so I can see the edge of them on my workbench, take another longboard, balance them.. he'll he can hang out there it's fine. they're going to be like this, now for him I'm going to use a tight Bond III waterproof, exterior glue and I like to just put a very little bit. if I was at Subway and they put this much mayonnaise on my sandwich, Id be upset. that's how much I am using and that is just because when I tip the board up I don't want it all to run off, if you put a bunch of glue on there it's going to fall off and be messy. then we sandwich all of that together push all of our boards so they are touching, and then take your nails, come on back nail count ever ready for you, if you guys would like to guess how many nails this is going to take my guess is 60 it's not a super big build. - แนวปฏิบัติและการใช้ชีวิต
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 4 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/_vK_cden2f8/mqdefault.jpg)
Support my channel with a like or share! :) you rock!
freeimage.host/i/JGHC1LB
What size brads are you using
@@scottglesmer137 1 inch 18 gauge
This old lady loves your channel. You make it so easy for someone like me ( a beginner) to understand and follow along. Thank you so much. Have a great day. 😊
Thanks for the boost! :) happy building!
awesome build for the upcoming spring sales, thank you again for the idea
No problem Bill, happy building
0:33 Love your push block. That's a beauty.
Thanks :)
Thanks! Just what I was looking for!
Thanks Dennis! :)
Thanks for sharing. Knowledge should be passed on, to this day I still straighten bend nails my grandfather taught me as a kid.
Thanks buddy :)
Cool project. Thank you for the content.
Thanks buddy :)
Good job and project thx for sharing enjoyed it Keep building
Thanks Larry :)
Awesome build like the idea keep em coming
Thanks buddy :)
Ohhh, I really like this one! I’m going to make some
Saweeet :) they are adorable
What a great video! You had so many little tips, I can't wait to make my own this summer!
Sweet! Happy building Kaylaa!
Well Just completed my first order of this one, definitely added some supports underneath for added strength. Thanks for the hook up on this bro appreciate you. Also for the 3 center back pieces they are 1.5 in up from the bottom of the box, just made it easier to put them in being able to put them to a line as opposed to trying to level them, hold, and nail all at the same time.
That would be easier. Nice catch :) thanks buddy
Always look forward for another video young man.. and the fact that you share your plans for free is awesome.. others charge for their plans.. I made the 3 picket planters but used regular treated pickets, but sanded the outside then used a big torch and burnt the wood for a rustic look, I also just sold the pair for 90 bucks... I'm going to make a pair of these bench planters next... love the channel... great work
Nice! Good hussle! ;)
@WhosTheVoss check into that torch, it's at harbor freight, 30 bucks, it hooks to your grill propane tank.. I used it to slightly burn the wood, it looks awesome, another option for your customers man.. wish I could post a picture of mine to show ya..
Can you share some additional information on how to do this?
@@michaelsmall6818wondering how burning works. Doesn't it set the wood on fire? I also am building planters using pressure treated pickets and sanding them.
@diybuildandlife207 it can catch it on fire if you hold the torch there too long, just keep making passes like you're painting, I'm telling you it's an awesome look, I used regular pressure treated fence pickets, not cedar.. they looked awesome, sold the same day I listed them..
Love your channel !!! My new favorite alongside MatthewPeech
Thanks buddy! :)
Good idea brad nails at an angle but using but I have found staples work best. you have two nails and les likely for the wood to work lose.
Good idea with using staples, I think with an outdoor project like this it would be fine, Im not a fan of using staples because they are more noticable 🤷♀️
I just love all your projects I want to make all of them I want to take your plan and change a few things Love your tho I really enjoy watching your videos Keep em coming I am fairly new to building to sell
Thanks :) happy building!
This is awesome! “Like pancakes and kids, the first ones a throw away” 😅
The truest statement in existence. Lololol
One this about the bench planter is part of the box where the plants goes will be covered up by the arms and the plant will be deprived of light. Other than that, it looks amazing!!😊
Some people make little hinged tool holders and it looks pretty dope :)
I like this one....probably gonna make a couple. I'm going to use a few screws as well....I'm just not a fan of brad nails for long time strength.
Thanks for the video and keep these kind of builds coming.
Happy building buddy :)
I agree. Brad nails are for interior work, not outside in the elements.
Hitting us hard with that pancake joke from the start!
😂😂😂
2:21 guessing 66 nails 11:44 no glue where the arm rest meets the back? Great build Aaron! Thanks for always sharing the cut diagrams! And the selling price!
Off, a few nails shy my guy ;) lol
@@WhosTheVoss part of it was I didn’t consider you’d 3 on each picket for the box and didn’t consider nailing the side to the bottom along front and back
Wow Voss, I made some planters like yours and put on Facebook I have sold around 20 and have 15 more orders to fill I know it want last long but has blown me drawers down
Orders will keep pouring in until about June ;) keep at it buddy! Good job!
Little tip.. Brad nails are ground to a chisel point and will always curve left or right looking down the top of your nail gun. Avoid those pesky nail blowouts
I've heard of this "chisel" nail thing! I didnt catch it until i edited that I blew through the bottom a whole bunch 😂😂
I like your videos, this channel is pretty unique in giving some entertaining and good advice about building simple things that others would pay money for. And if anything you've really tempted me into buying a nail gun! But to me the only downside is, I'm in Australia and I haven't found a source as yet for simple wooden fence pickets like those you use. And we certainly don't have big piles of cedar around. Anyway, keep making your videos, they're great!
Thanks buddy! Buy that nail gun! ;)
I like your bench design better though because mine took either 7 or 8 pickets. The bottom of my bench box was made up of shorter boards running perpendicular to the sides, along with all of my back pickets running all the way to the ground, explains the 2 extra pickets I was using.
😂😂
Excellent channel... We truly should live next door to each other! I could keep you in Eastern red cedar. We are building some out door planters for out new timber framed cabin. These are excellent inspiration
Ill put a for sale sign out tomorrow!! 😂😂 That would be devine!
@WhosTheVoss lol excellent... welcome 🙏 to the neighborhood!
Thanks for another great video ! Pretty sure you are the first person to use a nail gun as a musical instrument while you sing !
Question: Do you sand the pickets before you build your planters ? I have built some of the 3 picket planters from your plans, and on a couple I sanded the pickets smooth first, and I feel like they look nicer than the rough picket ones I built.
Thanks buddy ;) i do not sand the pickets, but it does look good if you leave the legs rough and sand the interior boards :)
Just picked up a few more pickets. Now i want to get even more because this build was not on my list. Well, let me tell you, it is now. 👍
It is an adorable little planterrr
87 based on what I’ve seen your nailing finger can do and your thoughts when shooting nails lol 😆
A little low, but closer than me :) lol
Your videos have been great. Unfortunately I am not able to download your plans. Any suggestions
Give it another try :)
freeimage.host/i/JGHC1LB
I can not source out the 1x6 cedar pickets in my area of Massachusetts any suggestions?
Thank you
Off, not really buddy, I bought mine in the early season, because once the ground begins to thaw the fence contractors start scooping them up :/
I can find the 1x4 at a local fence company however they are $8 a board
@@lakeville1853Pallet boards can be used for the shorter lengths, but might not match pickets.
I'm from the UK, what dimensions are your picket boards?
The Uk! ;) well, its 14 cm wide, 183-1/2cm long 1-1/2cm thick. I know thats not how you read in metric, however, I dont know how to read metric 😂
What size nails do i need and what is the length of the boards
18 gauge 1" nails, my pickets are 6' long :)
Do you have written plans for this.
Unfortunately I only have the cut diagram and the video tutorial :p
What length nails are you using?
18 gauge 1" nails
I see that in one of your videos, you used a sprayer to protect the cedar. Did you spray with urethane? Did you thin it?
I use clear Thompsons Water Seal, i do not dilute it :)
I found that video, looks like you use Thompsons
What size nails do you use?
18 gauge 1" brad nail :)
Galvanized nails?
Good old brad nails, i cover in my "boost your planter sales" video I show you an un sealed box and zero rust spots from the nails :)
9:13 pause for interview!
No call
👍
I just checked the price of cedar fence pickets 6ft $10.16 ea. plus 13% tax = $11.48 ea. We'll see if they sell here
Ouch. Thats triple what they are in the Mid west :/
Buddy, using your hand as a hammer on those pliers will come back to you 15 years from now. Ask me how I know. 😂
Gotchaaaa ;)
What size nails do I need
18 gauge 1" nails :)
Did you just wipe your glue booger under the table? LOL But seriously, why didn't you like version one? I kinda liked it!
The whole bottom of my bench is glue boogers. Lol, It gets cleaned after a sharp one pokes me. I just the first one looked silly :P
I guess 123 nails
Dangggg!
How do I download the plans?
Links are in the video description, and right here ;)
freeimage.host/i/JGHC1LB
@@WhosTheVossI can't get it to download?
@@WhosTheVoss It shows a blank screen.
79
Off, a bit off. Closer than me though lol
74
A little off, but closer than me :P lol
But, in my defense, it was my first attempt and I was just winging it ftom a pic I saw.
Sometimes winging it works, sometimes it keeps us scratching our heads ;) lol
@@WhosTheVoss you've got that right! I do a lot of head scratching! 🤣
Iam pissed I started watching your videos on planters and was pumped busted my ass to make a bunch from your plans thanks started posting on market place in the past 9 days have gotten over 6000 clicks and 40 orders out of the first 20 orders only have 5 picked up why do these folks do it
Yikes. I have a video dropping in one hour covering how flakey Marketplace is and how to boost sales. I dont mention, which I should have, that after I set the customers box aside, or, say they want to pick up on the weekend which is a few days away, I send them a photo of their item as a reminder. Marketplace kind of sucks, but it does produce results, you just have to follow up with them and hope they haven't ghosted you. I feel your pain! Good luck buddy!
I don’t build without 1/2 payment upfront for marketplace. If they want it that have to secure a deposit for it
Dude, get out of my head! I literally built 2 of your 3 picket boxes and an almost identical bench and posted them on Marketplace. I'm asking $30/ ea for boxes, $75 for the bench, or I offer the 3 piece set for $120. Sold 4 of the 3 piece sets in one day.
Nice!